非自持和非麦氏分布情况下托卡马克堆芯等离子体功率平衡

本文给出一组托卡马克堆芯等离子体功率平衡方程,它描述了在非自持和非麦氏分布情况下等离子体功率平衡的问题,计算结果表明。在现实可行的聚变堆工程和相应的等离子体参数情况下,堆芯中每秒可产生聚变中子PN大于10~19。     

三维有限差分波束传输法:用于Ti∶ LiNbO_3方向耦合器的模拟

提出求解三维傍轴近似波动方程的交替方向隐式差分格式，并用它模拟Ｔｉ∶ＬｉＮｂＯ３方向耦合器     

机械阻抗测量的一种新方法

本文介绍了一种新的机械阻抗测量方法－声强法，由定义出发将机械阻抗表为功率流和加速度响应谱的函数，应用结构声强技术测量功率流，声强法不需要测量作用力信号，可以用于测量任意结构中的各类机械阻抗，实验结果表明，声强获得的测量值与直接获得的测量值相近，声强法能较准确地测量一维和二维匀质结构中机械阻抗。     

Q波段宽频带线性化器设计

当前我国Q/V频段的低轨卫星互联网项目正在大力开展,宽带通信正在逐步发展。而国内相关线性化技术一般局限于较窄频带,相关研究尚不成熟。因此尽快研究设计宽频带线性化器十分有必要。采用适用于空间环境的模拟预失真技术,设计出针对卫星通信所用的行波管功率放大器（TWTA）的Q波段线性化器。其利用新型微带传输结构,结合肖特基二极管,可在毫米波频段实现超宽瞬时频带的线性化。在38～43 GHz（5 GHz）的瞬时频带内对TWTA的幅度失真以及相位失真有着很好的改善。线性化器在输入功率为−17～13 dBm的范围内,频带内幅度增益约为4.8～7.2 dB,相位扩张约为70°～88°。相对其他同类型线性化器,此线性化器对应频率较高,且可在很宽的瞬时频带内对TWTA实现比较稳定的线性化。     

HL-2M 装置供电系统研制

为满足 HL-2M 装置的供电需求,须配套建设相应的供电系统。通过仿真计算 HL-2M 装置的总体供 电需求,考虑到 HL-2A 装置现有的供电系统设备,提出了兼顾 HL-2A 和 HL-2M 装置供电需求的总体配置方案。介绍了国内首台 300MVA 立式交流脉冲发电机组、磁体电源、高压电源和电源控制系统的研制情况。     

磁场电源在 HL-2M 装置初始等离子体放电中的应用

磁场电源是 HL-2M 装置初始等离子体放电的重要组成部分,它关系到 HL-2M 装置零场的建立,等 离子体的击穿和维持及位形控制。为实现初始等离子体放电所需的供电电压和电流,对磁场电源从主回路、控制、 测量和保护分别作了相应的调整。在此基础上进行了大量的工程调试,确保了磁场电源的控制和保护等性能达到 初始等离子体放电的需求。在磁场电源运行中,电源控制性能和输出参数的一致性、纹波质量等都有显著提高。 介绍了磁场电源在调试及 HL-2M 装置初始放电中的应用。     

Nd∶YVO4/Nd∶GdVO4双波长激光器的功率均衡实验研究

实验研究了Nd∶YVO4/Nd∶GdVO4双波长激光器在不同抽运功率条件下,通过调节热沉温度达到功率均衡时的输出特性.实验结果表明:对于Nd∶YVO4/Nd∶GdVO4双波长激光器,当提高抽运功率,需要重新降低热沉温度达到功率均衡输出,降温幅度与抽运功率增加之比为11.23℃/W.与此同时,随着抽运功率和热沉温度的变化,双波长激光器的中心波长会出现小幅度的漂移,左峰波长随抽运功率增加的蓝移速率为0.056 nm/W,右峰波长随抽运功率增加的蓝移速率为0.054 nm/W.实验还发现功率均衡条件下激光器的输出总功率随抽运功率的增加而增加,拟合斜效率为8.7%,当抽运功率为5.58 W时,输出最大总功率达到115.7 mW.     

Power law fluid model for blood flow through a tapered artery with a stenosis

In the present paper, blood flow through a tapered artery with a stenosis is analyzed, assuming the flow is steady and blood is treated as non-Newtonian power law fluid model. Exact solution has been evaluated for velocity, resistance impedance, wall shear stress and shearing stress at the stenosis throat. The graphical results of different types of tapered arteries (i.e. converging tapering, diverging tapering, non-tapered artery) have been examined for different parameters of interest. Some special cases of the problem are also presented.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Strongly localized states in a single carbon nanotube with polymer molecules

A single-walled carbon nanotube (SWCNT) with conjugated polymer molecules is analyzed via optical spectroscopy. The presence of strongly localized excitonic states in the SWCNT is confirmed using time-integrated photoluminescence (PL). The PL spectrum exhibits extremely narrow width (~0.8 meV) which is attributed to the strong confinement of the states by polymer molecules. In addition, I observed that the excited states are gradually filled as a function of the excitation power, which supports the localized excitonic behavior. Only the ground excitonic state is observed at low excitation powers, but three additional PL peaks appear as the excitation power is increased. Especially, the power-dependent PL spectrum shows a blueshift and increased width, which can be elucidated in terms of quantum confined stark effect and the screening of induced electric fields. Overall, I demonstrate that the presence of polymer molecules induces several localized states in a single SWCNT.