Preparation of Fe/B powders by mechanical alloying

Steels with a high boron content are valuable as a neutron shield in waste containers and as control absorbers in nuclear reactors. The purpose of this study was to obtain by mechanical alloying an iron powder with 50% boron (by weight) and then powder-metallurgy materials. The elementary powders were mixed in a high-energy mill for 36 h in an inert atmosphere. Samples were withdrawn at intervals, and the powder was characterized by differential thermal analysis, X-ray diffraction and electron microscopy. The Fe/B powders withdrawn at different intervals of milling were diluted with further additions of iron up to a final content of 10% boron. The mixtures were uniaxially compacted at 500 MPa; their green density was verified, and they were sintered in argon at 1150°C. Their physical properties (density and dimensional change) and bending strength were evaluated and microstructural studies and fracture tests were performed.     

Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

计算机模式识别法对甲状腺机能亢进症微量元素谱的研究

据Mahlanobis距离判别法，利用计算机多元统计判别程序，对14例甲亢思者和21例健康人的血清中锌、铁、铜、锰、镁和锶等元素浓度差异进行分类判别研究。选择锌、铁、钙、锶作判别特征参量时，患者和健康人的分类准确率为100％，服碘前与服碘后的甲亢患者分类准确率为92.7％，分类研究指出，甲亢患者血清中的铁和锶浓度高于健康人，经服碘治疗后，患者血清中上述元素浓度降低与健康人相近。     

用光声谱法测量Ⅱ-Ⅵ族化合物粉末材料的吸收谱

本文报道了采用自行设计组装的光声光谱(PAS)测量系统,测定(Zn,Cd)(S,Se)粉末固溶体的带隙与组分的关系;观测ZnS:Mn粉末发光材料的光声谱,确定出Mn~(2+)五个激发态能级的位置;利用光声谱的深度剖面分析,对Cu_xS-ZnS:Mn粉末材料进行分析,获得满意的结果。表明光声谱法对凝聚态物质的研究和监测能提供多方面的信息,是一种极有用的新型光谱测量技术。     

A two-stage approach to automatic determination of 1H NMR coupling constants

(1)H NMR scalar coupling constants are a rich source of information on molecular structure, but their extraction from spectra can be less than straightforward. Previous approaches to J extraction include methods proposed by Hoye, Golotvin, and the 'modified J-doubling' method. Here we describe the ACCA method, currently implemented in the NMR package MestReC, which allows a high degree of automation in the extraction of coupling patterns even in the case of complex multiplets with sublinewidth splitting. The new approach is illustrated by application to strychnine, for which it has detected previously unreported couplings.     

Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

Sweeteners determination in table top formulations using FT-Raman spectrometry and chemometric analysis

A partial least squares (PLS) Fourier transform Raman spectrometry procedure based on the measurement of solid samples contained inside standard glass vials, has been developed for direct and reagent-free determination of sodium saccharin and sodium cyclamate in table top sweeteners. A classical 2² design for standards was used for calibration, but this system provides accuracy errors higher than 13% w/w for the analysis of samples containing glucose monohydrate. So, an extended model incorporating glucose monohydrate (2³ standards) was assayed for the determination of sodium saccharin and sodium cyclamate in all the samples. Mean centering spectra data pre-treatment has been employed to eliminate common spectral information and root mean square error of calibration (RMSEC) of 0.0064 and 0.0596 was obtained for sodium saccharin and sodium cyclamate, respectively. A mean accuracy error of the order of 1.1 and 1.9% w/w was achieved for sodium saccharin and sodium cyclamate, in the validation of the method using actual table top samples, being lower than those obtained using an external monoparametric calibration. FT-Raman provides a fast alternative to the chromatographic method for the determination of the sweeteners with a three times higher sampling throughput than that obtained in HPLC. On the other hand, FT-Raman offers an environmentally friendly methodology which eliminates the use of solvents. Furthermore, the stability of samples and standards into chromatographic standard glass vials allows their storage for future analysis thus avoiding completely the waste generation.     

Cyclodextrins as chiral stationary phases in capillary gas chromatography. Part VII: Cyclodextrins with an inverse substitution pattern – synthesis and enantioselectivity

Transferring the site of specific substitution of dipentylated cyclodextrins with methyl or acyl residues from the secondary 3-hydroxyl group to the primary 6-hydroxyl group was expected to provide new information on the mechanism of chiral recognition. The 3-position points towards and the 6-position points away from the cyclodextrin cavity which via inclusion complex formation is supposed to play a major role in chiral separation. The “inverse” 6-O-acyl-2,3-di-O-pentyl-cyclodextrins displayed almost no enantioselectivity but the corresponding 6-O-methyl derivatives are a versatile supplement to the chiral capillary GC phases nowadays available. Among the compounds that could be enantiomerically resolved are alcohols, amino acids, alkyl halides, bicyclic ethers, acetals, olefins, other hydrocarbons and chiral pharmaceuticals.     

The Crystal Structure of Disodium Phosphonate,Na2HPO3

Anhydrous disodium phosphonate, Na₂HPO₃, was prepared by dehydration of its pentahydrate. The crystal structure of Na₂HPO₃ was solved from high resolution X‐ray powder diffraction data (P2₁/n; Z = 4; a = 9.6987(1), b = 6.9795(1), c = 5.0561(1) Å, β = 92.37(1)°; V = 341.97(1) ų). The crystal structure consists of two types of sodium‐oxygen polyhedra, which are connected via common edges and vertices forming layers perpendicular to [100]. These Na(1)‐ and Na(2)‐layers are interlinked via common edges, forming in a 3D‐framework. The resulting topology is providing oxygen arrangements that please the coordinative requirement of phosphorus(III).     

Dissipative structures formed in the course of drying the colloidal crystals of silica spheres on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the deionized aqueous colloidal crystal suspensions of silica spheres (diameter: 103 nm) on a cover glass have been observed. Spoke-like and ring-like patterns are formed in the macroscopic scale; the former is the crack in the sphere film and the latter is the hill accumulated with spheres formed around the outside edge. The neighbored inter-spoke angle, thickness of the film, and other morphological parameters have been discussed as a function of sphere concentration, concentration of sodium chloride, and the inclined angle of the cover glass. Fractal patterns of the mud cracks are observed in the microscopic scale. Capillary forces between spheres at the air-liquid surface and the relative rates between the water flow at the drying front and the convection flow of spheres are important for the pattern formation. Electronic Publication