Raman investigation of hydrostatic and nonhydrostatic compressions of OH‐ and F‐apophyllites up to 8 GPa

Layer silicates F‐ and OH‐apophyllites, KCa₄Si₈O₂₀(F, OH)·8H₂O, have been investigated by Raman spectroscopy at hydrostatic and nonhydrostatic pressures up to ~8 GPa in diamond anvil cells using a 4 : 1 methanol–ethanol mix as pressure‐transmitting medium. Our experiments show that at hydrostatic compression, apophyllites retain their crystalline states (i.e. no amorphization) up to 5 GPa. The wavenumbers of most bands exhibit linear dependences on pressure, except for a few ones, e.g. at 162 and 3565 cm^–1 in OH‐form (160.5 and 3558 cm^–1 in F‐form) that show nonlinear dependences. Nonhydrostatic compression with additional uniaxial loading induces amorphization of apophyllites. The majority of the bands in OH‐apophyllite decreases markedly in intensity and shows considerable broadening under nonhydrostatic compression up to 3–6 GPa. In addition, the wavenumbers of several bands at nonhydrostatic compression exhibit considerable nonlinear dependences on pressure with strong hysteresis. These bands are mainly associated with vibrations of the interlayer ions and molecules and also of stretching and bending silicate sheets, hence being highly sensitive to the interlayer distance. Finally, we have calculated the lattice dynamics of F‐apophyllite and interpreted the majority of bands, and these data are used to explain the complex baric behavior of the bands. Copyright © 2011 John Wiley & Sons, Ltd.     

信息安全服务外包决策分析模型研究

随着信息化的发展,信息安全得到前所未有的重视,国家主管机构的监管越来越严厉,企业在面临强制压力的合规性问题时可以选择自行部署,也可以选择服务外包.通过建立数学模型模拟了这个过程.分析结果表明:在强制压力情况下,如果用户选择外包方式,那么用户信息系统的期望值随着强制压力的提高而降低,信息安全服务供应商的利润则随着强制压力的提高而提高.     

High P–T Raman study of transitions in relaxor multiferroic Pb(Fe0.5Nb0.5)O3

The vibrational and structural properties of Pb(Fe_0.5Nb_0.5)O₃ have been investigated using Raman spectroscopy up to 40 GPa at 300 K and from 300 to 415 K at selected pressures. The measurements reveal three phase transitions, at 5.5, 8.7, and 24 GPa at room temperature. The temperature dependences of the spectra indicate transitions at 1.5 GPa, at 335 and 365 K. The results are consistent with the appearance of an intermediate tetragonal P4mm phase between the ferroelectric R3m and paraelectric Pm‐3m phases. A P–T phase diagram is proposed that allows further insight into the magnetoelectric coupling present in this material. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparative analysis of the machine repair Problem with imperfect coverage and service pressure condition

In this paper we analyze the warm-standby M/M/R machine repair problem with multiple imperfect coverage which involving the service pressure condition. When an operating machine (or warm standby) fails, it may be immediately detected, located, and replaced with a coverage probability c by a standby if one is available. We use a recursive method to develop the steady-state analytic solutions which are used to calculate various system performance measures. The total expected profit function per unit time is derived to determine the joint optimal values at the maximum profit. We first utilize the direct search method to measure the various characteristics of the profit function followed by Quasi-Newton method to search the optimal solutions. Furthermore, the particle swarm optimization (PSO) algorithm is implemented to find the optimal combinations of parameters in the pursuit of maximum profit. Finally, a comparative analysis of the Quasi-Newton method with the PSO algorithm has demonstrated that the PSO algorithm provides a powerful tool to perform the optimization problem.     

High pressure X-ray emission spectroscopy at the advanced photon source

ABSTRACT

The structural, electronic, and magnetic properties of materials under high pressure are of fundamental interest in physics, chemistry, materials science, and earth sciences. Among several hard X-ray-based techniques, X-ray emission spectroscopy (XES) provides a powerful tool to probe element-specific information for understanding the electronic and magnetic properties of materials under high pressure. Here, we discuss on the particular requirements and instrumentation used in high pressure XES experiments. We then present several examples to illustrate the recent progress in high pressure XES studies at the Advanced Photon Source, followed by an outlook toward future development in high pressure XES.     

Mathematical Modeling of Multicomponent Nonisothermal Adsorption in Sorbent Particles Under Pressure Swing Conditions

A detailed model for nonisothermal sorption of multicomponent mixtures in a single sorbent particle (monodisperse or bidisperse with negligible intracrystalline mass transport limitations) under pressure swing conditions is developed in this study. The dusty-gas model is used to describe the coupling of the molar fluxes, the temperature, the partial pressures and the partial pressure gradients of the components in the pore space of the particle. The variations of the temperature are described by an energy equation in which both convective and conductive modes of heat transport are accounted for. No limitations are imposed on the number of the components in the mixture and on the type of the adsorption isotherm. The model is applied in the investigation of the industrially important air-zeolite 5A system. Two cases with respect to the surrounding gas phase are examined: infinite environment, which is representative for single particle experiments, and finite environment, which is representative for the situation in packed bed adsorbers. It is found that in an infinite environment the external and internal temperature gradients are equally important while in a finite environment the external heat transport limitations are negligible. It is concluded that in modeling the nonisothermal operation of adsorption processes occurring in packed beds it is not necessary to allow for the temperature differences between the gas phase and the surface of the adsorbing particles. Furthermore, if the temperature gradients within the particles can be neglected, only a single temperature equation is needed to describe the energy transport in the bed.     

Demixing in polystyrene/methylcyclohexane solutions

Cloudpoint data for polystyrene/methylcyclohexane solutions extending over moderate ranges of pressure and molecular weight are available in the literature. Those data are supplemented with new results from this laboratory to fill in gaps and extend the MW range (to 761 ≤ MW/amu ≤ 2 × 10⁷). The resulting data net is discussed and reasons to extend studies to higher pressure are presented. © 1996 John Wiley & Sons, Inc.     

Viscosity based droplet size controlling in negative pressure driven droplets generator for large‐scale particle synthesis

The poor control and regulation of droplets limit the applications of negative pressure driven droplet generator (NPDDG). Here, we present a simple method to control droplet size in NPDDG via varying the oil viscosity. Depending on the infinite intersolubility of high viscous mineral oil and low viscous hexadecane, we obtain a series of oils with kinematic viscosities linearly varied from 4.2 to 194.6 mm²/s. By using these oils as continuous phases, monodisperse droplets are fabricated with controllable size in NPDDG. This viscosity‐based droplet regulation method is effective, reliable, and compatible with scale‐up processes. Compared with droplet generator driven by positive pressure, the presented method can fabricate hydrogel particles massively, without complicated multilayer chip structure and complex fluid controlling, which may extend the potential of NPDDG in droplets based high‐throughput assay or large‐scale materials synthesis.     

Saturated Vapor Pressure of Iridium(III) Acetylacetonate

The temperature dependency of the saturated vapor pressure of Ir(acac)₃ has been measured by the method of calibrated volume (MCV), the Knudsen method, the flow transpiration method, and the membrane method. The thermodynamic parameters of phase transition of a crystal to gas were calculated using each of these methods, and the following values of ΔH _T ⁰ (kJ mol⁻¹) and ΔS _T ⁰ (J mol⁻¹K⁻¹), respectively, were obtained: MCV: 101.59, 156.70; Knudsen: 130.54, 224.40; Flow transpiration: 129.34, 212.23; Membrane: 95.45, 149.44 Coprocessing of obtaining data (MCV, flow transportation method and Knudsen method) at temperature ranges 110−200°C as also conducted:ΔH _T ⁰ =127.9±2.1 (kJ mol⁻¹ ); ΔS _T ⁰ =215.2±5.0 (J mol⁻¹ K⁻¹ ). This revised version was published online in August 2006 with corrections to the Cover Date.