A study on the phase transformation behaviour of Cu-20wt.Sn alloy produced using powder metallurgy method: Experimental and molecular dynamics modelling

In this study, Cu-20wt.Sn alloy was produced by powder metallurgy (PM) method by using high purity element powders. The phases in the microstructure of the produced alloy were determined by XRD study. The phase transformation behaviour of the alloy was investigated by DSC and modelling method. Moreover, the Cu-20wt.Sn alloy system was modelled with molecular dynamics (MD) simulation based on modified Embedded Atom Method (MEAM). The radial distribution function (RDF) was calculated to determine the structural properties of system during the phase transformations. The experimental results showed that the transformation ($\alpha +\delta$) → ($\alpha +\gamma$) occur at temperature above 500°C. The simulation results showed that the phase transformation $\alpha +\delta \to \alpha +\gamma$ occurs at 550°C temperature. Our simulation results are in reasonable agreement with the experimental data.     

Comparative in vivo constituents and pharmacokinetic study in rats after oral administration of ultrafine granular powder and traditional decoction slices of Chinese Salvia

Salvia miltiorrhiza, one of the most well‐known herbal medicines, is commonly used for the treatment of coronary heart diseases in China. Besides traditional decoction slices (TDS), another relatively new product of S. miltiorrhiza, ultrafine granular powder (UGP; D90 < 45 μm), is also increasingly being used. In this paper, a UHPLC‐LTQ‐Orbitrap MS technique was developed for a metabolite profile study after oral administration of UGP and TDS of S. miltiorrhiza. The results showed that the number of in vivo absorbed compounds from UGP was much greater than that from TDS, and different types of products from S. miltiorrhiza will have different metabolic processes in vivo. Furthermore, a UHPLC‐Q‐Trap MS/MS method for simultaneously determining four tanshinones (tanshinone IIA, dihydrotanshinone I, tanshinone I and cryptotanshinone) was established and applied to assess the pharmacokinetics of the two types of products. All of the analytes displayed significant higher area under the concentration–time curve and peak concentration after oral administration of UGP than after TDS, indicating that ultrafine powder product could improve the bioavailability and absorption of cryptotanshinon,tanshinone II A,dihydrotanshinonE I and tanshinone I in vivo. The present study provides scientific information for further exploration of the pharmacology of these two types of S. miltiorrhiza and offers a reference for clinical administration of S. miltiorrhiza.     

Crystal structure of a novel interrupted aluminosilicate,CNU-1 with an unusual framework

The crystal structure of a novel interrupted aluminosilicate, CNU-1, was synthesized hydrothermally at 433 K and was found to have a hexagonal crystal system, P-62c, in which an unusual T–O–T angle of 180°, similar to that of MWW, was discovered. Further, one of the hydroxyl groups in the interrupted structure was disordered systematically.     

Microextraction techniques for the determination of volatile and semivolatile organic compounds from plants: A review

Vegetables and fruits are necessary for human health, and traditional Chinese medicine that uses plant materials can cure diseases. Thus, understanding the composition of plant matrix has gained increased attention in recent years. Since plant matrix is very complex, the extraction, separation and quantitation of these chemicals are challenging.     

Application of electromagnetic processing for development of high-performance sintered powder metal parts

Electromagnetic processing was used to study the effects of electro-magneto forming on the dimensional control and thermal stability of sintered powder metal (PM) parts. The investigation was carried out on sinter-hardened, low chromium-molybdenum bainitic steel. The results show an increase in the microhardness of about 14% for the electromagnetic processed parts compared to the as-sintered parts. This was attributed to the 2% increase in the density, 17% and 29% reduction in the volume fraction of porosity and width of the bainitic lath, respectively, due to the electromagnetic processing. Dimensional characterization was carried out using a vertically aligned push-rod dilatometer. After four thermal cycles of heating and cooling, at a controlled rate of 5 °C/min to 1000 °C, the electromagnetic processed parts exhibited reduced dimensional change of about 44% lower than for the as-sintered parts. This is significantly important for applications that demand high dimensional tolerance and performance, especially at elevated temperatures.     

The Acceleration Severity Index in the impact of a vehicle against permanent road equipment support structures

The acceleration Severity Index (ASI), described in European Standard EN12767 (The passive safety of support structures for road equipment. Requirements, classification and the test method) is regarded as the most important indicator of impact on the occupants. The requirements for experiments are described, having in mind that the results depend on many factors. One of them is the selection of a vehicle to be used in the crash test. To perform numerical vehicle crash simulation, the finite-element models of permanent road equipment support structures were developed using the LS Dyna software available. To examine the response of the vehicle upon the impact, the acceleration severity index curves were calculated and visualised in Matlab.     

Exploratory Analysis for Elemental Characterization of Biomass Residues From Biodiesel Production by Inductively Coupled Plasma Optical Emission Spectrometry

Edible and non-edible seeds with high oil content are used as the main raw material for biodiesel production. The residual biomass (press cake or oil cake) can be used as animal feed, to aggregate value to the biodiesel production cycle. In this work, a microwave-assisted-digestion procedure for elementary determination by inductively coupled plasma optical emission spectrometry (ICP OES) using dilute nitric acid was developed. Inter-laboratorial reference material was used to check the accuracy. A full factorial design in addition to exploratory analysis through principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to classify the samples: press cakes from castor (Ricinus communis), jatropha (Jatropha curcas), radish (Raphanus sativus), sunflower (Heliantus annus), and coffee (Coffe arabica), according to their similarities.     

Influence of relative humidity on the electrostatic charging of lactose powder mixed with salbutamol sulphate

In this study, electrostatic charging of lactose and its mixtures with salbutamol sulphate (SS) were studied as a function of relative humidity (RH). Powder adhesion onto a steel pipe surface was also investigated. The powders were charged by sliding in a steel pipe. Increase in RH decreased the charging of lactose and mixtures, but the effect on SS was not evident. Furthermore, the charge of the mixtures reversed from negative to positive as RH was increased and remained positive as the samples were again dried. Humidification also changed the adhesion behavior of the mixtures onto the pipe surface.     

A convenient and sensitive method for haloacetic acid analysis in tap water by on‐line field‐amplified sample‐stacking CE–ESI‐MS

In this study, we propose a simple strategy based on flow injection and field‐amplified sample‐stacking CE–ESI‐MS/MS to analyze haloacetic acids (HAAs) in tap water. Tap water was passed through a desalination cartridge before field‐amplified sample‐stacking CE–ESI‐MS/MS analysis to reduce sample salinity. With this treatment, the signals of the HAAs increased 300‐ to 1400‐fold. The LODs for tap water analysis were in the range of 10 to 100 ng/L, except for the LOD of monochloroacetic acid (1 μg/L in selected‐ion monitoring mode detection). The proposed method is fast, convenient, and sensitive enough to perform on‐line analysis of five HAAs in the tap water of Taipei City. Four HAAs, including trichloroacetic acid, dichloroacetic acid, dibromoacetic acid, and monobromoacetic acid, were detected at concentrations of approximately 1.74, 1.15, 0.16, and 0.15 ppb, respectively.     

Comparison of sample preparation methods combined with gas chromatography with electron‐capture detection for the analysis of multipesticide residues in lotus seeds

Sample preparation is always the major bottleneck in analytical chemistry for the determination of pesticide residues. Different sample preparation methods have been proposed due to the wide variety of pesticides used and the inherent complexity of the matrices. In this study, different sample preparation methods including SPE, matrix solid‐phase dispersion, the quick, easy, cheap, efficient, rugged, and safe method, and a one‐step completion method were compared and evaluated for extracting pesticides from lotus seeds. Analysis was carried out using GC with electron‐capture detection. The results showed that good recoveries for tested pesticides were obtained by using Florisil in the four methods, and the extraction efficiency of the one‐step completion method was superior to the other three methods. The one‐step completion method was confirmed to have good linearity, reproducibility, stability, and recovery for the detection of 36 pesticides in lotus seed samples. The data collected from this study are expected to prove useful in regulating the concentration of the residues in lotus seeds, as well as in protecting human health from the hazards posed by these residues.