Complexes of tetra-tert-butyl-tetraazaporphine with Al(III) and Zr(IV) cations as fluoride selective ionophores

In this work, complexes of Zr(IV) and Al(III) cations with 2,7,12,17-tetra-tert-butyl-5,10,15,20-tetraazaporphine (TAP) were tested as ionophores in plasticized PVC membranes of ion-selective electrodes. It was found that both tested ionophores show enhanced affinity towards fluoride anion. High fluoride selectivity was observed in the presence of anionic or cationic additives in the membrane, which indicates that proposed compounds work according to charged or neutral carrier mechanism, depending on membrane composition and pretreatment.tert-Butyl substituents, present in the structure of tested compounds, were supposed to prevent formation of ionophore dimers within the membrane phase. This process was found to be responsible for some unfavorable potentiometric properties of electrodes based on complexes of Zr(IV) and Al(III) cations with porphyrins (compounds closely related to tetra-tert-butyl-5,10,15,20-tetraazaporphine). As it was shown using spectrophotometrical measurements, Al(III)-TAP was not susceptible to dimerization, while dimer formation was observed for Zr(IV)-TAP. In full agreement with these observations, electrodes with membranes containing Al(III)-TAP responded in near-Nernstian and fast manner towards fluoride anion, while the employment of Zr(IV)-TAP as ionophore resulted in super-Nernstian and sluggish response. Plasticized PVC membranes doped with Al(III)-TAP and 20 mol% of lipophilic anionic additives shown remarkable F⁻ selectivity, with selectivity coefficients, , as follows: −4.4 (Y⁻Br⁻), −4.3 (Cl⁻), −4.2 (NO₃⁻), −3.6 (SCN⁻), −2.9 (ClO₄⁻).     

用固体石蜡山梨酸碳糊电极电位法测定食品中山梨酸

制备了一种以山梨酸根与乙基紫形成的缔合物为电活性物的固体石蜡山梨酸碳糊电极,并对其性能做了测定。结果显示该电极对山梨酸有较好的能斯特响应。山梨酸的线性范围为2.2×10-5～1.0×10-1mol.L-1,检出限为1.6×10-5mol.L-1。该电极用于食品中山梨酸根的测定,结果与分光光度法结果相符。     

Highly Selective Potentiometric Sensor for Determining Phenazopyridine Hydrochloride in Biological Fluids Using N,N′-(Pyromellitoyl)-bis-L-tyrosine Dimethyl Ester

A new membrane selective electrode based on the potentiometric method was developed for the determination of phenazopyridine. The membrane signal is based on the interaction of N,N′-(pyromellitoyl)-bis-L-tyrosine dimethyl ester with phenazopyridine. The sensor displays a linear response with a slope of 61.1 mV decade^?1 for phenazopyridine concentrations in the range of 1.0 × 10^?2–1.0 × 10^?5 mol L^?1 and with detection limit of 8.0 × 10^?6 mol L^?1 of phenazopyridine. The electrode enjoys a fast response time. Application of this potentiometric sensor for phenazopyridine determination in pharmaceuticals, urine, and blood serum samples is reported without any special pretreatment required.     

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL^?1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10^?5–1.0 × 10^?3 M), low detection limit (0.9 µg mL^?1), and a stable baseline for a 5 × 10^?2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.     

Fluoride-selective polymeric membrane electrodes based on Zr(IV)- and Al(III)-salen ionophores of various structures

Al(III)- and Zr(IV)-salophens of novel structures were tested as anion-selective ionophores. It was shown that these compounds are highly selective to fluoride and give selectivity greatly deviating from classical Hofmeister pattern, when doped into the polymeric membrane of ion-selective electrode (ISE). The following selectivity sequence has been recorded for both ionophores: F⁻ > ClO₄⁻ > SCN⁻ > NO₃⁻ ≈ Br⁻ ≈ Cl⁻. The results of potentiometric and spectrophotometric measurements allow to conclude that the nature and structure of salophen ligands influence stability of ISE working parameters. An increase in salophen ligands lipophilicity results in prolongation of the ISE lifetime, most likely due to slower ionophore decomposition caused by the hydrolysis of imine bonds in salophen structure. Ion-selective electrodes (ISEs) with the most successful Al(III)-salophen exhibited a stable, fast and near-Nernstian fluoride response and a functional lifetime near 3 weeks and selectivity coefficients with as follows: −2.8 (Y⁻ = Br⁻), −2.7 (Cl⁻), −2.8 (NO₃⁻), −1.5 (SCN⁻), −1.3 (ClO₄⁻), which is better than for other ones based on Zr(IV)- and Al(III)-salophens and salens described to date.     

Zn(II)-selective membrane electrode based on tetra(2-aminophenyl) porphyrin

A new PVC membrane electrode for Zn²⁺ ions based on tetra(2-aminophenyl) porphyrin (TAPP) as membrane carrier is prepared. The sensor exhibits a linear stable response over a wide concentration range (5.0×10⁻⁵ to 1.0×10⁻¹ M) with a slope of 26.5 mV/decade and a limit of detection 3.0×10⁻⁵ M (1.96 ppm). It has a response time of about l0 s and can be used for at least 8 months without any divergence in potential. The propose membrane sensor revealed good selectivities for Zn²⁺ over a wide variety of other metal ions and can be used in pH range of 3.0–6.0. It was successfully applied to the direct determination of zinc in a pharmaceutical sample and also as an indicator electrode in potentiometric titration of Zn²⁺ ions.     

Silver(I) Complexes with Nitrogen-Containing Noncyclic, Macrocyclic, and Macrobicyclic Ligands in Propylene Carbonate

Stability constants and thermodynamic data for complex formation of silver(I) with noncyclic, macrocyclic, and macrobicyclic ligands have been measured in propylene carbonate using potentiometric and calorimetric methods. All ligands containing two nitrogen donor atoms form extremely stable complexes. Only if substituents reduce the basicity of the nitrogen donor atoms, the stability of the complexes decreases drastically. However, the cryptand (221) forms the most stable complex of all ligands examined. In this case, the dimensions of the ligand cavity and of the cation are nearly identical.     

Thermodynamic and voltammetric studies of salicylaldehyde-4-(2-pyridyl)-3-thiosemicarbazone

Summary UV spectra, dc polarograms, cyclic voltammetry and coulometry measurements of salicylaldehyde-4-(2-pyridyl)-3-thiosemicarbazone (H₂ SPT) were recorded inBritton-Robinson buffer solutions ofpH 2–12. The dissociation constants of H₂ SPT evaluated spectrophotometrically and potentiometrically in a 5% (v/v)DMF-water mixture are concordant. The dc-polarograms in solutions ofpH<8.5 exhibit a single 4-electron diffusion-controlled polarographic wave, whereas in solutions ofpH>8.5 two waves are observed. The cyclic voltammograms give a single cathodic peak in acidic and neutral solutions, whereas two cathodic peaks can be identified in alkaline ones. An electrode mechanism is proposed and discussed. The effect of temperature on the dissociation constants and the polarographic data was also investigated; the corresponding thermodynamic parameters were derived and are discussed.

---

Thermodynamische und voltammetrische Untersuchungen an Salicylaldehyd-4-(2-pyridyl)-3-thiosemicarbazon

Zusammenfassung UV-Spektroskopische, dc-polarographische, voltammetrische und coulometrische Messungen an Salicylaldehyd-4-(2-pyridyl)-3-thiosemicarbazon (H₂ SPT) inBritton-Robinson-Pufferlösungen (pH 2–12) wurden durchgeführt. Die spektrophotometrisch und potentiometrisch ermittelten Dissoziationskonstanten von H₂ SPT in 5% (v/v)DMF/Wasser stimmen überein. In Lösungen mit einempH-Wert unter 8.5 zeigen die dc-Polarogramme eine einzelne diffusionskontrollierte polarographische Welle (4e^–), während in Lösungen mit einempH-Wert von über 8.5 zwei Wellen zu beobachten sind. Die cyclischen Voltammogramme weisen in sauren und neutralen Lösungen einen, in basischen Lösungen hingegen zwei kathodische Peaks auf. Ein Elektrodenmechanismus wird vorgeschlagen und diskutiert. Der Effekt der Temperatur auf die Dissoziationskonstanten und die polarographischen Ergebnisse wurde ebenfalls untersucht. Die entsprechenden thermodynamischen Größen wurden bestimmt und werden diskutiert.

     

Quantitative determination of fucoidan using polyion-sensitive membrane electrodes

The use of polyanion and polycation-sensitive membrane electrodes to detect five different preparations of fucoidan is described. Unlike linear polyanionic molecules previously measured with polymer membrane-based electrochemical sensors, fucoidans from marine brown algae are all highly branched, sulfated polysaccharides with varying charge densities and structures, depending on the species of seaweed, method of extraction used and extent of purification. When tridodecylmethylammonium (TDMA) was used as the ion-exchanger, a large, non-equilibrium EMF response was observed over a concentration range of 0.5–50 μg mL⁻¹ fucoidan. Fucoidan was also measured by titration with polycationic protamine, using a dinonylnaphthalene sulfonate (DNNS)-doped membrane electrode as the potentiometric endpoint detector. Potentiometric titration was used to determine the binding ratio between protamine and fucoidan at the neutralization endpoint for each fucoidan preparation. This binding ratio was then used to successfully determine the fucoidan content of commercially available nutritional supplements. Fucoidan was also measured in undiluted blood serum, demonstrating that this method may be applicable for measuring fucoidan for clinical applications.     

Electrical Control of Urease Activity Immobilized to the Conducting Polymer on the Carbon Felt Electrode

The activity of urease varies by its redox reaction. Active urease has an SH group that is essential to exhibit its activity, however, oxidation agents such as quinone compounds can oxidize the SH group in urease and a S–S bond is produced, resulting in the loss of enzyme activity. The reduction potential of cystine was almost the same as that of the recovery of urease activity. In this work, it has been found that the SH group of urease can be oxidized by not only chemical reaction but also by the direct electrode oxidation of urease and the produced S–S bond can be reduced to SH group by chemical and electrode reactions, and the original enzyme activity is recovered. This research shows that the regulation of urease activity is easily possible by changing the electrode potential of the porous carbon felt immobilized urease. The variation of urease activity was monitored by ammonia or carbon dioxide electrode equipped with the urease immobilized carbon felt, and the ammonia or carbon oxide generated from urea can transfer through the carbon felt to reach the each gas permeable membrane. The combination of gas electrode with porous conducting material such as carbon can supply the novel device for the electrochemical investigation of enzyme activity.