Growth Behavior of CdS Nanoparticles Embedded in Polymer and Sol-Gel Silica Matrices: Relationship with Surface-State Related Luminescence

Chemical techniques were employed to synthesize CdS nanoparticles embedded in polymer (PEG 300) and sol-gel silica matrices. Systematic growth of particles (radius 3–9 nm) was obtained by adjusting post-deposition annealing temperature and time to examine the dependence of surface-state–related luminescence on particle size. Photoluminescence (PL) peak energy showed a linear dependence with a gentle slope in the weak confinement region and a steep slope in the strong confinement region, the divergence being observed near the excitonic Bohr radius for CdS. The empirical relation proposed for the weak confinement region could be used for estimating chemically prepared CdS nanoparticle size with a high degree of reliability from PL peak energy.     

Finite-Size Effects for the Potts Model with Weak Boundary Conditions

Using the Pirogov–Sinai theory, we study finite-size effects for the ferromagnetic q-state Potts model in a cube with boundary conditions that interpolate between free and constant boundary conditions. If the surface coupling is about half of the bulk coupling and q is sufficiently large, we show that only small perturbations of the ordered and disordered ground states are dominant contributions to the partition function in a finite but large volume. This allows a rigorous control of the finite-size effects for these weak boundary conditions. In particular, we give explicit formulæ for the rounding of the infinite-volume jumps of the internal energy and magnetization, as well as the position of the maximum of the finite-volume specific heat. While the width of the rounding window is of order L ^–d , the same as for periodic boundary conditions, the shift is much larger, of order L ^–1. For strong boundary conditions—the surface coupling is either close to zero or close to the bulk coupling—the finite size effects at the transition point are shown to be dominated by either the disordered or the ordered phase, respectively. In particular, it means that sufficiently small boundary fields lead to the disordered, and not to the ordered Gibbs state. This gives an explicit proof of A. van Enter's result that the phase transition in the Potts model is not robust.     

Unusual Behavior of Nanocrystalline Strontium Oxide Toward Hydrogen Sulfide

The thermodynamically favored reaction of solid strontium oxide with gaseous hydrogen sulfide is kinetically enhanced to a large degree by the use of higher surface area nanocrystalline SrO in the form of brush-like collections of metal oxide fibers. An unusual feature is that the reaction SrO + H₂S SrS + H₂O proceeds stoichiometrically at room temperature, but at higher temperatures the reaction efficiency goes down, apparently due to rapid temperature induced crystal growth of the nanocrystalline SrO. The samples studied vary in crystallite size from 20 to 27nm, while average particle size (nanocrystal aggregates) varies in the following order; aerogel prepared SrO (100nm) 相似文献   

The Investigation of Bulk and Surface Polariton Modes in Ga1?xNxAs by Using Infrared Magneto Spectroscopy

We present and discuss infrared magnetoplasma reflectivity and surface polariton modes in Ga_1–xN_xAs. It assumed that the sample is characterized by a magnetoplasma dielectric tensor. Surface polariton dispersion for two component magnetoplasma was calculated from reflectivity spectra data. We detect transverse optic phonon of GaN sublattice in 470 cm^-1. The origin of sharp feature in p-polarization reflectivity about 300 cm^–1 as well as LO phonon frequency of GaAs sublattice is due to Brewster mode. An interesting feature of surface modes in Voigt geometry is nonreciprocalicity, which means that the frequency changes when the direction of propagation is reversed. Also, the infrared magnetoplasma reflectivity of GaNAs should be providing determination of the electrons and heavy holes effective mass and carrier's concentration.     

An optical measurement of vortex shape at a free surface

We have proposed an optical method of vortex shape measurement based on Fourier transform profilometry (FTP) and verified it by experiment. The results of our experiment proposed in this paper show that FTP can efficiently reconstruct the vortex shape at a free surface and this method is suitable for wide use in studying such problems as liquid shear flow, wake of an object, flow behind a bluff body, and wetting angle.     

Effects of saturation on optical bistability with coupled surface plasmons

We present exact numerical results for a symmetric layered medium (prism/Ag film/nonlinear dielectric/Ag film/prism) where the middle dielectric slab is assumed to have a saturation-type nonlinearity. We show bistable behaviour in the power dependence of the reflectivity ofp-polarized light under the condition when coupled surface modes are excited in the structure. Moreover, we study the effect of saturation on the bistable behaviour to show that multivalued character is inhibited by saturation effects. The field distributions corresponding to the minimum reflectivity states of the nonlinear structure are also presented.     

非球面塑料透镜注射型芯工艺探讨

本文来自于作者的实践。介绍了加工方法及测量问题。重点叙述了加工中的一些关键,同时也提供了国内外在这方面的进展情况。     

Ultrasound-assisted extraction of functional compound from mulberry (Morus alba L.) leaf using response surface methodology and effect of microencapsulation by spray drying on quality of optimized extract

This study aimed to optimize the ultrasound-assisted extraction (UAE) condition of mulberry leaf extract (MLE) using response surface methodology and to microencapsulate MLE by spray drying using different coating materials and ratios of coating material and MLE. The extraction results showed that MLE from condition of 60 °C (X₁, temperature), 30 min (X₂, time) and 60% v/v (X₃, ethanol concentration) exhibited the highest bioactive compound and antioxidant activity (DPPH and FRAP assay). Based on this optimal condition, MLE was further encapsulated by spray drying. It was found that MLE encapsulated with resistant maltodextrin at ratio of MLE and resistant maltodextrin 1:1 (w/w) showed the highest encapsulation yield (%) and encapsulation efficiency (%). Water solubility, moisture content and water activity were non-significant (p > 0.05) among the microcapsules. The scanning electron microscope (SEM) revealed that the types of coating material affected their microstructures and microcapsules prepared by resistant maltodextrin as coating material had a spherical shape, smooth surface and less shrinkage than microcapsules prepared by maltodextrin and gum arabic which had rough surfaces. The highest antioxidant activity was obtained from microcapsule prepared by gum arabic at ratio of MLE and gam arabic 1:2 (w/w). In conclusion, optimal condition from UAE and encapsulation by spray drying suggest the critical potential for production of functional food with improved bioactive compound stability and maximized antioxidant activity.     

Multivariate optimization and comparison between conventional extraction (CE) and ultrasonic-assisted extraction (UAE) of carotenoid extraction from cashew apple

Carotenoids are an essential component of cashew and can be used in pharmaceuticals, cosmetics, natural pigment, food additives, among other applications. The present work focuses on optimizing and comparing conventional and ultrasound-assisted extraction methods. Every optimization step took place with a 1:1 (w:w) mixture of yellow and red cashew apples lyophilized and ground in a cryogenic mill. A Simplex-centroid design was applied for both methods, and the solvents acetone, methanol, ethanol, and petroleum ether were evaluated. After choosing the extractor solvent, a central composite design was applied to optimize the sample mass (59–201 mg) and extraction time (6–34 min). The optimum conditions for the extractor solvent were 38% acetone, 30% ethanol, and 32% petroleum ether for CE and a mixture of 44% acetone and 56% methanol for UAE. The best experimental conditions for UAE were a sonication time of 19 min and a sample mass of 153 mg, while the CE was 23 min and 136 mg. Comparing red and yellow cashews, red cashews showed a higher carotenoid content in both methodologies. The UAE methodology was ca. 21% faster, presented a more straightforward composition of extracting solution, showed an average yield of superior carotenoid content in all samples compared to CE. Therefore, UAE has demonstrated a simple, efficient, fast, low-cost adjustment methodology and a reliable alternative for other applications involving these bioactive compounds in the studied or similar matrix.     

Unusual Surface Latent Heat Flux Variations and Their Critical Dynamics Revealed before Strong Earthquakes

We focus on the possible thermal channel of the well-known Lithosphere–Atmosphere–Ionosphere Coupling (LAIC) mechanism to identify the behavior of thermal anomalies during and prior to strong seismic events. For this, we investigate the variation of Surface Latent Heat Flux (SLHF) as resulting from satellite observables. We demonstrate a spatio-temporal variation in the SLHF before and after a set of strong seismic events occurred in Kathmandu, Nepal, and Kumamoto, Japan, having magnitudes of 7.8, 7.3, and 7.0, respectively. Before the studied earthquake cases, significant enhancements in the SLHF were identified near the epicenters. Additionally, in order to check whether critical dynamics, as the signature of a complex phenomenon such as earthquake preparation, are reflected in the SLHF data, we performed a criticality analysis using the natural time analysis method. The approach to criticality was detected within one week before each mainshock.