流动注射化学发光法测定山奈酚

采用流动注射技术,研究了高锰酸钾-山奈酚-过氧化氢体系的化学发光行为,对影响化学发光强度的因素进行了试验,建立了流动注射化学发光法测定山奈酚的新方法.方法检出限为1×10-10g·mL-1,线性范围为1.0×10-7-1.0×10-4g·mL-1.对1.0×10-6g·mL-1的山奈酚平行测定11次,其RSD为2.1%...     

UV dosimeter based on polyamide woven fabric and nitro blue tetrazolium chloride as an active compound

This paper reports on the preparation and features of a UV light dosimeter composed of nitro blue tetrazolium chloride (NBT) and polyamide woven fabric. This textile dosimeter is based on the conversion reaction of NBT into formazan, which was initially examined in aerated aqueous solutions through steady state UV irradiation. Irradiated solutions change their colour as a consequence of the formation of polydisperse NBT formazan particles. This was analysed in relation to the absorbed dose of UV light through UV–VIS spectrophotometry and dynamic laser light scattering measurements. When NBT substrate molecules are embedded in polyamide textile, UV irradiation leads to similar effects as in solution. However, the tinge intensity changes at much lower absorbed doses. The dependence of the tinge intensity on the absorbed dose was followed by measurements of the remission of light from the NBT-polyamide samples. Consequently, the calibration parameters were calculated such as the dose sensitivity, dose range, and quasi-linear dose range. An improvement of the NBT-polyamide samples by application of a colour levelling agent and improvement of their resistance to humidity is presented. Finally, the samples were used for estimation of absorbed UV energy distribution showing their capability as new dosimeters for in-plane high resolution radiation dose measurements.     

Fabrication and characterization of Zn1−xAlxO nanoparticles by DC arc plasma

In this paper we have introduced a simple method for the fabrication of aluminum doped zinc oxide (AZO) nanoparticles. The Zn_1−xAl_xO nanoparticles with different concentrations of Al (x=0.01, 0.03, 0.06, 0.09, 0.12) were fabricated successfully by this method. The samples were analyzed by the use of several techniques such as SEM, EDX, XRD, PL and UV-vis spectroscopy. The SEM images showed that the fabricated nanoparticles had spherical shapes. The XRD patterns of the samples indicated that the Al atoms substituted in the Zn positions in the crystal lattice of ZnO and there were some changes in the lattice parameters. A blue shift in the λ_max of the absorption and a red shift in the λ_max of the emission were observed. The results also indicated that the amount of shifts had a direct relationship with the changes in the lattice parameters.     

Effect of Li2O content on physical and structural properties of vanadyl doped alkali zinc borate glasses

The effect of Li₂O content in vanadyl doped 20ZnO+xLi₂O+(30−x)Na₂O+50B₂O₃ (5≤x≥25) glasses has been studied with respect to their physical and structural properties. The absence of sharp peaks in XRD spectra of these glass samples confirms the amorphous nature. The physical parameters like density, refractive index, ionic concentration and electronic polarizability vary non-linearly with x mol% depending on the diffusivities of alkali ions. EPR and optical absorption spectra reveal that the resonance signals are characteristics of VO²⁺ ions in tetragonally compressed octahedral site. Spin-Hamiltonian, crystal field, tetragonal field and bonding parameters are found to be in good agreement with the other reported glass systems. The tetragonal distortion (g_⊥-g_∥) and Dt reveals that their values vary non-linearly with Li₂O content and reaches a minimum at x=10 mol%. An anomaly of character has been observed in all the properties of vanadyl doped glass systems, which gives a clear indication of mixed alkali effect.     

Synthesis of a new palladium salt using N‐benzyl DABCO chloride and its application in Suzuki reaction

A palladium catalyst was synthesized using N‐benzyl DABCO chloride and palladium chloride. The structure of this catalyst was characterized and then the catalyst was used in Suzuki cross‐ coupling reaction of different aryl halides with arylboronic acids. All substrates afforded the corresponding products in good to high yields in the presence of low amounts of the catalyst. Under the heating conditions employed, cheaper and more available aryl chlorides gave relatively high yields in the Suzuki reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

Mild and Useful Method for N-Acylation of Amines

Iodine is found to promote quantitative N-acylation of primary and secondary amines (aliphatic and aromatic) in a very short time with an equimolar amount of acetyl chloride and benzoyl chloride under solvent-free conditions at room temperature. This catalytic acylation of amines offers an additional useful method for the acetylation using acetyl chloride instead of acetic anhydride and other acetylating agents. This method is also useful in the N-acylation of heterocycles. Mild reaction condition, high selectivity, efficiency, and good yields are some of the major advantages of the procedure.     

聚氯乙烯(PVC)管材中氯乙烯单体的溶解沉淀-顶空-气相色谱法测定

建立了聚氯乙烯(PVC)管材中氯乙烯单体的溶解沉淀-顶空-气相色谱法。选择HP-Wax毛细管柱为分离色谱柱,4mL含水量为37.5%(体积分数)的N,N-二甲基乙酰胺(DMA)溶液溶解PVC管材,在75℃平衡35min的条件下顶空进样进行气相色谱分析。结果显示,氯乙烯在0.025～2.50mg/L范围内线性关系良好,相关系数r=0.9993。以3倍信噪比计算,该方法的检出限为4.75μg/L。对样品加标测定6次,加标回收率为90%～96%,相对标准偏差(RSD)小于6.0%。该方法比常规的顶空进样方法的灵敏度提高了近9倍,具有操作简单、快速、灵敏度高、准确度和精密度好等优点,适合于PVC管材中氯乙烯单体的检测。     

Aktivierungsanalytische Bestimmung von Spurenelementen in Tomaten

Die Autoren machen mit aktivierungsanalytischen Untersuchungen am Reaktor der Technischen Universität Budapest bekannt. Der thermische Neutronenfluβ war 2·10¹¹ ncm^?28^?1, und es wurde ein Ge(Li)-Detektor mit 25 cm³ Volumen und einer Energieauflösung von 2 keV angewendet. Die untersuchten Tomatenproben enthielten durchschnittlich 85% Trockensubstanz. Es wurden folgende Konzentrationen an Spurenelementen ermittelt (in mg/kg): Br: 50,1; Mn: 10,2; Zn: 9,3; Cu: 6,6; As: 0,051; Sb:0,030; Au: 0,005.     

SELECTIVE PREPARATION OF α,α-DICHLOROKETONES WITH COPPER(II) CHLORIDE

ABSTRACT

Aryl and enolizable alkyl ketones react with copper(II) chloride in dimethylformamide to produce the corresponding α,α-dichloroketone in high yields. Remarkable qualities of the process are high selectivity towards these substrates, undetected polychlorinated by-products, easy work-up, commercially available reagents and HCl as the only waste stream.     

Surface modification of an epoxy resin with polyamines via cyanuric chloride coupling

The presence of polyamine groups on the surface of dielectric resins potentially improves the adhesion with electrochemically deposited metals. In this article, first cyanuric chloride is covalently bound to the surface hydroxyl groups of the epoxy resin. The remaining reactive sites on the coupled cyanuric chloride molecule are then used to anchor polyamines. New data on the triazine coupling is presented. The surface reactions are monitored and characterized by means of ATR-IR, SEM-EDS, XPS and ToF-S-SIMS.