Zur Kenntnis eines Oxoargentato(I)-aurats(III): Ba4AgAuO6

On the Oxoargentato(I)-aurat(III): Ba₄AgAuO₆ The hitherto unknown compound Ba₄AgAuO₆ was prepared by oxidizing Ba/Au/Ag alloy with BaO₂/Ba(OH)₂ mixture in closed Ag tubes. X-ray single crystal investigation led to orthorhombic symmetry space group D-Cmcm; a = 13.275; b = 5.782; c = 11.396 Å; Z = 4. Ba₄AgAuO₆ shows distorted pentagonal bipyramidal polyhedra around Ba²⁺ and square planar AuO₄ polygones. Ag⁺ shows an unusual 2 + 2 coordination by O^2?.     

Palladium-catalyzed Suzuki-Miyaura couplings of potassium aryl trifluoroborates with 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one

Pd(PPh₃)₄ catalyzed Suzuki-Miyaura cross-coupling reactions of 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one with various potassium aryl trifluoroborates afforded the corresponding 4-substituted coumarins or 4-substituted quinolin-2(1H)-ones in good to excellent yield.     

钛酸钾晶须界面性质研究

通过乳液聚合的方法对钛酸钾晶须进行表面改性,获得了表面包裹聚甲基丙烯酸甲酯的钛酸钾晶须. FT-IR、SEM、EDS的表征表明,钛酸钾晶须的表面包裹了聚甲基丙烯酸甲酯膜,形成了以钛酸钾晶须为核,聚甲基丙烯酸甲酯为壳的复合粒子.研究表明,改性后的晶须表面能降低,在有机溶液中的界面张力大大降低,与聚甲基丙烯酸甲酯的界面性质相似,说明改性后的晶须基本被聚甲基丙烯酸甲酯完全包裹,因此晶须由亲水性变为疏水性,在有机溶液中的分散性显著提高.     

Improving palladium-catalyzed cyanation of aryl halides: development of a state-of-the-art methodology using potassium hexacyanoferrate(II) as cyanating agent

Benzonitriles are easily accessible via palladium-catalyzed cyanation of aryl halides using potassium hexacyanoferrate(II) as cyanide source. This method is applicable on both activated and deactivated aryl and heteroaryl bromides and activated chlorides giving the corresponding benzonitriles in good to excellent yield. Advantageously, the used cyanating agent is non-toxic and cheap. The presented catalyst system is rather simple and it is not necessary to add expensive phosphines, making the novel method also attractive for industrial applications.     

Synthesis and Characterization of Methylzinc Tri(tert‐butyl)silylphosphanide as well as Related Sodium and Potassium Phosphanylzincates

The reaction of dimethylzinc and tri(tert‐butyl)silylphosphane in toluene yielded dimeric methylzinc tri(tert‐butyl)silylphosphanide ( 1 ) which crystallized tetrameric. Compound 1 was deprotonated with sodium in DME and the solvent‐separated dimeric ion pair [(dme)₃Na]⁺ [(dme)Na(MeZn)₂(μ‐PSitBu₃)₂]^? ( 2 ) was isolated. The reaction of 1 in THF with two equivalents of potassium and one equivalent of tri(tert‐butyl)silylphosphane gave dimeric [{tBu₃Si(H)P}{(thf)₂K}₂(MeZn)(PSitBu₃)]₂ ( 3 ). Both of these phosphanylzincates contain Zn₂P₂ cycles with Zn‐P bond lengths of approximately 237 pm, whereas in 1 larger Zn‐P bond lengths of 248.5 pm were found due to the larger coordination numbers of the phosphorus and zinc atoms.     

Prescriptions and Ingredients for Controlled CC Bond Formation with Organometallic Reagents. New synthetic methods (5)

Merits and drawbacks of known carbon-carbon linking procedures are outlined. Two novel methods are discussed in some detail: the copper-catalyzed alkylation of Grignard reagents and reactions with allylpotassium compounds. Both methods provide a very efficient access to saturated, unsaturated, as well as functionally substituted hydrocarbons and moreover permit an astonishing degree of regio- and stereoselective control of olefin synthesis.     

纤维素基磁性聚偕氨肟树脂吸附Mn（Ⅶ）

用酸处理的纤维素基磁性聚偕氨肟树脂（AMAO）在溶液中吸附KMnO4，发生氧化还原反应的几率在2％以下；用碱处理的树脂（BMAO）作吸附剂，KMnO4还原为Mn（OH）4的比例剧增，达到或超过10％，并且与溶液的pH有关。但是，Mn（Ⅶ）被还原为Mn（Ⅳ）的量基本上不受KMnO4起始浓度、吸附剂添加量和吸附时间变化的影响。BMAO树脂吸附KMnO4的量是树脂偕氨肟基含量的5倍以上。超当量吸附现象反映了物理吸附的本质。     

Synthesis, structure and properties of delocalized transition metal chelates: Diazoketiminato chelates of Co(III) and Pt(II)

The reactions of HL 1 [where HL is 1N-(2-pyridyl-2-methyl)-2-arylazoaniline and is formulated as ArN = NC₆H₄N(H)(CH₂C₅H₄N); Ar = C₆H₅ (for HL¹) or p-MeC₆H₄ (for HL²) or p-ClC₆H₄ (for HL³)] with K₂PtCl₄ and Co(ClO₄)₃ · 6H₂O afforded the (L)PtCl and [(L)₂Co]ClO₄ complexes, respectively. The HL ligands bind the platinum(II) and cobalt(III) centres in a tridentate (N,N,N) fashion, forming new diazoketiminato chelates upon dissociating the amino proton. The X-ray structures of (L³)PtCl and [(L³)₂Co]ClO₄ were determined. Redox properties of the new complexes have been examined.     

Chemoselective mono halogenation of β-keto-sulfones using potassium halide and hydrogen peroxide; synthesis of halomethyl sulfones and dihalomethyl sulfones

The synthesis of α-halo β-keto-sulfones using potassium halide and hydrogen peroxide as a chemoselective mono halogenation reagent and the synthesis of α,α-symmetrical and asymmetrical dihalo β-keto-sulfones and α-halo, α-alkyl and β-keto-sulfones is described. Base induced cleavage of α-halo β-keto-sulfones, α,α-dihalo β-keto-sulfones, and α-halo, α-alkyl β-keto-sulfones afforded the corresponding halomethyl sulfones, dihalomethyl sulfones and haloalkyl sulfones.     

Flow-injection chemiluminescent determination of metoclopramide hydrochloride in pharmaceutical formulations and biological fluids using the [Ru(dipy)(3)(2+)]-permanganate system

A flow-injection (FI) methodology using (2,2′-dipyridyl) ruthenium(II) [Ru(dipy)₃²⁺] chemiluminescence (CL) was developed for the rapid and sensitive determination of metoclopramide hydrochloride. The method is based on the CL reaction of metoclopramide with Ru(dipy)₃²⁺ and KMnO₄ in a sulfuric acid medium. Under the optimum conditions, a calibration graph was obtained over the concentration range 0.005-3.5 μg ml⁻¹ with a limit of detection (S/N=2) of 1 ng ml⁻¹. The correlation coefficient was 0.99993 (n=8) with a relative standard deviation of 0.48% for 10 determinations of 1 μg ml⁻¹ of drug. The method was successfully applied to the determination of metoclopramide in pharmaceutical preparations and biological fluids after IP administration of 25 mg kg⁻¹ dose to rats. The elimination half-life was 2.5±0.4 h.