Parametric amplification of light in a BBO crystal with pumping by YAG:Nd laser radiation

Special features of the parameteric amplification of light in a BBO crystal in the pumping field of YAG:Nd laser radiation (λ=1.064 μm) were investigated in the case in which the wavelength of the amplified signal of light lay within the eye-safe region of the spectrum and the idle wavelength lay within the region of strong absorption. The correlation between the parametric gain coefficient and the linear absorption coefficient of the crystal has been revealed. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 67, No. 2, pp. 263–266, March–April, 2000.     

Improvement on the manipulation of a single nitrogen-vacancy spin and microwave photon at single-quantum level

It remains a great challenge to realize direct manipulation of a nitrogen-vacancy(NV) spin at the single-quantum level with a microwave(MW) cavity. As an alternative, a hybrid system with the spin–phonon–photon triple interactions mediated by a squeezed cantilever-type harmonic resonator is proposed. According to the general mechanical parametric amplification of this in-between phonon mode, the direct spin–phonon and photon–phonon couplings are both exponentially enhanced, which can even further improve the coherent manipulation of a single NV spin and MW photon with a higher efficiency. In view of this triple system with enhanced couplings and the additional sideband adjustable designs, this scheme may provide a more efficient phonon-mediated platform to bridge or manipulate the MW quantum and a single electron spin coherently. It is also hoped to evoke wider applications in the areas of quantum state transfer and preparation,ultrasensitive detection and quantum nondestructive measurement, etc.     

支持向量回归在人体血红蛋白无创检测中的应用

采用线性渐变滤光片(Linear variable filter, LVF),优化设计高性能、便携式的人体血液成分近红外检测设备,研究了支持向量回归(Support vector regression, SVR)模型对人体血红蛋白(Hemoglobin, Hb)的预测能力及稳定性,以实现贫血疾病的无创诊断.无创采集100位志愿者食指前端光谱信息并划分定标集、验证集1和2.应用网格搜索方法优选惩罚参数与核函数参数c=5.28, g=0.33,用以建立稳健的SVR模型.随后,分别对验证集1和2中Hb水平进行定量分析.实验结果表明: 预测标准偏差(RMSEP) 分别为10.20 g/L和10.85 g/L,相对预测标准偏差(R-RMSEP) 为6.85%和7.48%,测量精度较高且SVR模型对不同样品的适应性较强,基本满足临床检测要求.基于SVR算法自行设计的LVF型近红外光谱检测设备在贫血症的无创诊断中有着良好的应用前景.     

基于杂交链式反应辅助多重信号放大的端粒酶灵敏检测

端粒酶是真核细胞维持端粒长度的关键逆转录酶,其生物活性的高低可以为多种癌症的临床诊断和预后治疗提供有价值的信息.本研究以人宫颈癌细胞(HeLa细胞)裂解液中的端粒酶为研究对象,通过借助杂交链式反应辅助多重信号放大策略,提出了一种新颖、灵敏的检测端粒酶电化学方法.首先将端粒酶的延伸引物自组装在金电极表面,当端粒酶存在时,端粒酶能够催化引物的延伸,产生与发卡环探针H1部分互补的序列,进而引发杂交链式反应,形成由两个发卡环探针(H1和H2)交替杂交而形成的DNA长链.由于H1和H2末端均修饰有生物素,加入链霉亲和素修饰辣根过氧化物酶后,辣根过氧化物酶被被连接到电极表面,催化邻苯二胺氧化生成2,3-二氨基吩嗪,产生显著的电化学信号.实验结果表明,本研究建立的端粒酶电化学检测方法高效、可行,线性范围宽,灵敏度高,可以检测每毫升10个HeLa细胞裂解液中的端粒酶.本方法具有较好的选择性,能有效区分端粒酶和对照蛋白.     

Mechanism of the Asymmetric Autocatalytic Soai Reaction Studied by Density Functional Theory

The mechanism of the Soai reaction has been thoroughly investigated at the M05‐2X/6‐31G(d) level of theory, by considering ten energetically distinct paths. The study indicates the fully enantioselective catalytic cycle of the homochiral dimers to be the dominant mechanism. Two other catalytic cycles are shown to both be important for correct understanding of the Soai reaction. These are the catalytic cycle of the heterochiral dimer and the non‐enantioselective catalytic cycle of the homochiral dimers. The former has been proved to be not really competitive with the principal cycle, as required for the Soai reaction to manifest chiral amplification, whereas the latter, which is only slightly competitive with the principal one, nicely explains the experimental enantioselectivity observed in the reaction of 2‐methylpyrimidine‐5‐carbaldehyde. The study has also evidenced the inadequacy of the B3LYP functional for mechanistic investigations of the Soai reaction.     

Construction of a simple optical sensor based on air stable lipid film with incorporated urease for the rapid detection of urea in milk

This work describes the construction of a simple optical sensor for the rapid, selective and sensitive detection of urea in milk using air stable lipid films with incorporated urease. The lipid film is stabilized on a glass filter by polymerization using UV (ultra-violet) radiation prior its use. Methacrylic acid was the functional monomer, ethylene glycol dimethacrylate was the crosslinker and 2,2′-azobis-(2-methylpropionitrile) was the initiator. Urease is incorporated within this mixture prior to the polymerization. The presence of the enzyme in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of urea provided a “switching on” of the fluorescence which allows the rapid detection of this compound at the levels of 10⁻⁸ M concentrations. The investigation of the effect of potent interferences included a wide range of compounds usually found in foods and also of proteins and lipids. These lipid membranes were used for the rapid detection of urea in milk.     

纳米探针芯片技术用于微量乙肝病毒DNA的检测

利用两组探针修饰的微粒:(1)表面标记有可与待测乙肝病毒(HBV) DNA另一端结合的纳米金探针1(信号探针)以及可与信号探针部分结合的纳米金探针2(检测探针);(2)表面标记有可与待测HBV DNA一端结合的磁珠探针(捕捉探针1).检测靶HBV DNA时,磁珠探针与信号探针在液相中可分别与HBV DNA靶序列一端结合最终形成三明治样结构.再以磁场将三明治样复合物从反应液中分离,以DTT溶液将信号探针从纳米金颗粒上洗脱.洗脱后的信号探针数量反映靶基因的多寡,信号探针一段与预先点样的基因芯片上的捕捉探针2结合,检测探针与信号探针另一段相结合,最后用银染液将检测探针显色从而得到靶目标DNA相对定量信息.结果表明,本检测方法的检测灵敏度达到10-15 mol/L水平.检测时间少于1.5 h,检测结果与HBV DNA水平呈现较好的线性关系且无假阳性结果;本方法有望用于乙肝病人血清中HBV DNA的快速筛测及其它微生物基因的检测.     

Femtosecond noncollinear parametric amplification for ultrafast spectral dynamics

We setup an ultrafast noncollinear optical parametric amplification system for fluorescence spectral dynamics study. The simultaneous broadband amplifying ability makes it suitable as an ultrafast spectrometer with femtosecond time-resolution. By real-time fluctuation correction, femtosecond fluorescence spectra are obtained efficiently by a single scan. With this technique, the solvation dynamics of DCM dye in four solvents are measured to demonstrate the performance of the system. We show that this ultrafast time-resolved spectrometer is very useful and efficient in studying ultrafast spectral dynamics.     

Dual-beam coaxial amplification system of stimulated Brillouin scattering based on polarization control technology

In the field of Brillouin lidar, it has very important significance to find one method that can amplify the Brillouin scattering signal in real time. One new-type Brillouin lidar detection system based on Nd:YAG pulsed laser and polarization control device is designed in this paper. The key point of this detection system is to have two pulsed coherent lights with same frequency, same polarization and same initial phase, of which one beam is taken as the detection wave for generating stimulated Brillouin scattering signal and the other beam is taken as pumping wave for real time and effective amplification of stimulated Brillouin scattering signal. This detection system mainly includes two pulsed lasers and one electro-optical polarization controller. The laser is mainly used to obtain the pulsed lights with same frequency and same phase, and the polarization controller is mainly used to change the polarization state of two coaxial beams to make them change into same polarization state from orthogonal polarization state thus to enable the pumping wave to amplify the backward stimulated Brillouin scattering signal. It is shown from the experimental results that the adoption of this new system can realize the effect of pumping amplification and can increase the signal to noise ratio to a certain extent.     

Gain evaluation of compact designing on Er/Yb codoped germanate glass channel waveguide

Bent waveguide structures (U- and F-bend) based on UV-sensitive Er³⁺/Yb³⁺ codoped germanate glass substrates have been designed to achieve high-gain C-band amplification. Using simulated-bend method, the optimal radius for curved structure is offered to be 1.90 cm with loss coefficient of 0.0015 dB/cm, as the substrate size is minimally schemed. In the wavelength range of 1528–1559 nm, obvious gain enhancement for the bent structure waveguides is anticipated, while, for the F-bend waveguide, the internal gain at 1533.8 nm wavelength is derived to be 22.55 dB, which is much higher than the value of 14.06 dB in the U-bend waveguide, and over three times higher than that of the straight one, after compensating both the bend loss and the transition loss. The simulation results indicate that the bent structure designing is beneficial in attaining high optical gain in Er³⁺/Yb³⁺ codoped germanate glass substrates, which assures that long-period grating can be applied to implement practical C-band gain-flattened amplification.