Identification of inorganic ions in post‐blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection

Novel CE methods have been developed on portable instrumentation adapted to accommodate a capacitively coupled contactless conductivity detector for the separation and sensitive detection of inorganic anions and cations in post‐blast explosive residues from homemade inorganic explosive devices. The methods presented combine sensitivity and speed of analysis for the wide range of inorganic ions used in this study. Separate methods were employed for the separation of anions and cations. The anion separation method utilised a low conductivity 70 mM Tris/70 mM CHES aqueous electrolyte (pH 8.6) with a 90 cm capillary coated with hexadimethrine bromide to reverse the EOF. Fifteen anions could be baseline separated in 7 min with detection limits in the range 27–240 μg/L. A selection of ten anions deemed most important in this application could be separated in 45 s on a shorter capillary (30.6 cm) using the same electrolyte. The cation separation method was performed on a 73 cm length of fused‐silica capillary using an electrolyte system composed of 10 mM histidine and 50 mM acetic acid, at pH 4.2. The addition of the complexants, 1 mM hydroxyisobutyric acid and 0.7 mM 18‐crown‐6 ether, enhanced selectivity and allowed the separation of eleven inorganic cations in under 7 min with detection limits in the range 31–240 μg/L. The developed methods were successfully field tested on post‐blast residues obtained from the controlled detonation of homemade explosive devices. Results were verified using ion chromatographic analyses of the same samples.     

基于LED的便携式近红外整粒小麦成分测量仪的研制

采用最新集成芯片和软件设计 ,研制出以近红外LED为光源的整粒小麦成分快速分析的仪器 ,为小麦成分的现场检测提供了一个经济、快捷的便携式设备。该测量仪由近红外LED光源、窄带干涉滤光片、菲涅尔透镜、硅光电池检测器、单片机系统及校准模型等组成。与其他近红外仪器相比 ,该测量仪具有体积小、结构简单、低功耗、抗震动等特点。同时介绍了该测量仪的硬件设计 ,软件设计 ,对小麦蛋白质的建模和预测应用实例等。该测量仪可在粮库甚至田间现场对整粒小麦成分进行无损检测     

便携式光谱仪在现场材质分析中的应用

讨论了便携式光谱仪 ,准确、快速地对已成型的金属材料化学成分的无损现场分析应用     

特征变量优选在苹果可溶性固形物近红外便携式检测中的应用

为实现苹果可溶性固形物(SSC)的便携式快速检测,利用环形光纤探头和微型光谱仪搭建便携式苹果可溶性固形物光谱采集系统,结合无信息变量消除(UVE)、遗传算法(GA)、竞争性自适应加权(CARS)算法筛选基于偏最小二乘(PLS)的苹果可溶性固形物的近红外光谱特征波长。另外,采用反向区间最小二乘支持向量机(BiLS-SVM)和GA算法优选基于LS-SVM的特征波长变量,分别建立所选特征波长和全波段的PLS模型和LS-SVM模型。试验结果表明,经过GA-CARS算法从全波段1 512个波长中筛选出的50个特征波长建立的PLS模型效果最好,其预测相关系数和预测均方根误差分别为0.962和0.403°Brix。利用该检测装置结合GA-CARS筛选的特征波长,可有效简化苹果可溶性固形物近红外便携式检测模型并提高模型的预测精度,为进一步构建便携式苹果可溶性固形物检测设备奠定了基础。     

便携式拉曼光谱仪快速检测唾液中盐酸吡格列酮的含量

人体唾液与血液中的相应成分有着密切关系。利用唾液代替血液进行检测,可极大地缩短分析时间、减少检测限制、降低安全隐患等,因此在临床医学、毒品管控等方面均有重要意义。发展了便携式拉曼光谱仪利用表面增强拉曼光谱技术快速定量检测唾液中盐酸吡格列酮(口服降血糖药物)含量的方法。借助纳米金溶胶的表面增强拉曼散射效应,在激发光源波长为785 nm时,可以得到低浓度盐酸吡格列酮的高质量拉曼光谱图。同时,不同浓度盐酸吡格列酮表面增强拉曼光谱分析结果表明,该方法还可直接用于唾液中盐酸吡格列酮的定量检测。盐酸吡格列酮含量与其特征峰强度线性相关,相关系数为0.992 3,且最低检测浓度达10 μg·L-1。     

785nm便携式光栅外腔可调谐半导体激光器的研制和输出特性

针对移频激发拉曼光谱测试系统的小型化需求,在Littrow结构中,采用商用的785nm大功率激光二极管作为增益器件,构建了一款便携式光栅外腔可调谐半导体激光器。该激光器通过采用一种新型的波长调谐方法,即以改变半导体增益器件相对于准直透镜的水平位置来实现波长的连续调谐,实现了尺寸为140mm×65mm×50mm的小型化结构设计。相比于传统的旋转衍射光栅改变光线在光栅上的入射角来实现波长调谐的方式,该方法有效地缩减了增益器件的平移距离,从而有利于便携式外腔激光器波长的快速宽带调谐。实验结果表明,该激光器具有较宽的波长调谐范围,在340~900mA注入电流下均可实现10nm以上的波长调谐,尤其在900mA大注入电流下,其波长调谐覆盖779.40~791.07nm,调谐范围可达11.67nm,且激射线宽小于0.2nm,单波长输出功率最高可达280mW,放大的自发辐射抑制比大于25dB,呈现出较优异的输出性能,满足移频激发拉曼光谱检测系统对光源的基本要求。此外,该激光器可采用一微型压电陶瓷驱动器来实现波长的电动调谐,实验获得了1.35nm的波长调谐范围,证实了所制785nm便携式光栅外腔可调谐半导体激光器适合作为便携式移频激发拉曼光谱检测系统的光源用于减除原始拉曼光谱中的荧光背景。     

苹果可溶性固形物便携式检测实验研究

为实现苹果可溶性固形物的便携式快速检测,搭建了以STS光谱仪和自制样品杯作为光谱检测装置的苹果可溶性固形物便携式检测平台。采用自行设计的检测平台采集了苹果的近红外漫反射光谱,对比分析了不同的光照角度、光源与探头距离对光谱响应特性的影响,建立了苹果可溶性固形物偏最小二乘模型(PLS)和最小二乘支持向量机模型(LS-SVM),采用连续投影算法及主成分分分析法对最小二乘支持向量机模型进行了优化,并对比分析了两种检测模型的优劣。其中当光源距探头距离为15 mm光源角度为45°时,结合偏最小二乘法建立苹果的可溶性固形物定量检测模型精度最高。模型的预测集相关系数为0.924,预测均方根误差为0.334%。实验结果表明,采用四周照射、底部接收并结合避光圈的这种结构布置能够有效的克服杂散光现象并且提高了光谱中的有效信息。研究可为快速、便携的苹果可溶性固形物检测仪器的设计提供参考依据和理论支撑。     

二苯碳酰二肼柠檬酸盐光度法快速测定水中铬(Ⅵ)

合成了一种二苯碳酰二肼柠檬酸盐,建立了基于这种试剂和手持式光度计的铬(Ⅵ)的快速现场测定方法.在弱酸性介质中,此试剂与铬(Ⅵ)形成紫红色产物,λ_max=540nm,摩尔吸光系数ε=3.32×10⁴L·mol^-1·cm^-1,铬(Ⅵ)含量在0.03～2.00mg/L内符合比尔定律.该法用于电镀废水中铬(Ⅵ)的快速测定,结果令人满意.     

Analysis of bulk and inorganic degradation products of stones,mortars and wall paintings by portable Raman microprobe spectroscopy

This work reports the use of a portable Raman microprobe spectrometer for the analysis of bulk and decaying compounds in carbonaceous materials such as stones, mortars and wall paintings. The analysed stones include limestone, dolomite and carbonaceous sandstone, gypsum and calcium oxalate, both mono- and dihydrated, being the main inorganic degradation products detected. Mortars include bulk phases with pure gypsum, calcite and mixtures of both or with sand, soluble salts being the most important degradation products. The pigments detected in several wall paintings include Prussian blue, iron oxide red, iron oxide yellow, vermilion, carbon black and lead white. Three different decaying processes have been characterised in the mortars of the wall paintings: (a) a massive absorption of nitrates that reacted with calcium carbonate and promoted the unbinding of pigment grains, (b) the formation of black crusts in the vault of the presbytery and (c) the thermodecomposition of pigments due to a fire.     

Portable capillary electrophoresis system for identification of cattle breeds based on DNA mobility

A portable CE system was developed for the identification of cattle breeds. The system had a width of 44 cm, depth of 27 cm, height of 13 cm, and a weight of only ∼8 kg and included an LIF detector, with everything integrated into a small box. The specific sizes of genes were quickly separated and detected with a high sensitivity based on the difference in the DNA mobility using a diode‐pumped solid‐state LIF detector. Using this system, the 100‐bp DNA ladder was analyzed under a 1.0% PVP (M_r=300 000) sieving gel matrix in a fused silica capillary with LODs of 4.4–13.0 pg/μL (S/N=3) for 100–3000 bp DNAs, which indicates ten times improved value than other commercialized portable CE system. The migration times and the peak areas showed good reproducibilities with relative standard deviations that were less than 0.49 and 1.3% (n=5), respectively. Based on the difference in the DNA mobility of the microsatellite and SNP markers, Korean cattle and Holstein were exactly identified as the model cattle breeds within 32 and 3.5 min, respectively.