Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Determination of the specific interaction of disubstituted aromatic compounds on hydrous zirconium oxide-loaded porous polymer resin

Summary A porous polymer resin loaded with hydrous zirconium oxide (Zr-gel) was evaluated as a stationary phase for the liquid chromatographic separation of disubstituted aromatic compounds. The prepared Zr-gel was used to separate disubstituted phenols andortho-substituted benzoic acid derivatives in reversed-phase mode. The retention time of catechol was greater than those of other disubstituted phenols; this implies that the Zr-gel has specificity for the phenolic hydroxyl group. The retention behavior ofortho-substituted benzoic acid derivatives on the Zr-gel was also evaluated in reversedphase mode using buffer. Phthalic acid was specifically retained in the vicinity of pH 6.0, which has been regarded as the equal adsorbic point. Similar behavior was also observed for salicylic acid, although the retention time of salicylic acid was less than that of phthalic acid. It seems that the specific retention behavior of hydrous zirconium oxide is a result of complexation with ligands such as hydroxyl and carboxyl groups. The results of this study have revealed that the retention mechanism of hydrous zirconium oxide is a combination of ion exchange and interaction based on complexation with ligands.     

Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

制备具有光催化活性的金红石相纳米氧化钛粉体

以TiCl4为原料，通过控制盐浓度和水解温度可以在温和条件下制备出晶粒尺 寸为6nm的金红石相氧化钛粉体，比表面积为175m^2/g。测定了粉体的X衍射、红外 和拉曼光谱。TEM照片显示粉体呈放射状颗粒，其粒径尺寸在200－400nm。苯酚的 光催化降解实验表明它比具有相同比表面积的锐钛矿粉体有更高的光催化活性。其 较大的团聚颗粒尺寸有利于光催化反应后的分离。     

Prediction of the net retention volumes in gas chromatography using porous polymers coated with different stationary phases

Summary A new expression which permits the prediction of the net retention volumes in gas chromatography with column packings of coated porous polymers is reported. The porous polymers Chromosorb 101 and Chromosorb 102 were used as supports and squalane, Ethofat and Carbowax 20M as stationary phases at three different column temperatures of 80°C, 100°C and 150°C. Several organic compounds of various polarity were used as test compounds and the net retention volumes, V_Ntheor, have been calculated according to this new expression. The V_Ntheor values were compared with the experimental net retention volumes, V_Nexp, and it was found that the difference between these two values is dependent on the type of compound and column packing. Nevertheless, the elution order could be predicted in most cases.     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Hydrodeoxygenation of glycerol into propanols over a Ni/WO3–TiO2 catalyst

1. Download : Download high-res image (71KB)
2. Download : Download full-size image

     

Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication     

Effect of carbon content on photocatalytic activity of C/TiO2 composite

A series of carbon-covered titania (CCT) were prepared via pyrolysis of sucrose highly dispersed on titania surface in flowing N₂. The samples were characterized by XRD, BET, DTA-TG, UV—Vis, and their photocatalytic properties were evaluated with two model pollutants, methylene blue (MB) and rhodamine B (RB), at room temperature. The effect of carbon content on photocatalytic activity of the C/TiO₂ composite was investigated. It was found that the effect of carbon content is different for different pollutants or different light sources. For three tested samples, under UV illumination CCT01 has the highest activity for MB photocatalytic degradation, while in the case of RB, CCT02 is the most active photocatalyst. Under visible light illumination, CCT005 has the highest activity for both MB and RB photocatalytic degradation. Translated from Chinese Journal of Catalysis, 2006, 27(1): (in Chinese)