多相孔隙储层声学研究进展

本文回顾了关于油、气、水及水合物多相孔隙储层的声学研究进展,提出了"储层声学"的概念,阐明了其研究意义、研究内涵和方法,并介绍了油、气、水及天然气水合物储层声波模拟的部分新的研究成果。指出应该从声学理论和实验等出发,结合声学储层探测和精细描述的实际情况,如利用声学原理圈闭和估算天然气水合物等,继续深入开展相关基础理论和实验研究工作,丰富储层声学研究内容,更加完善储层声学理论体系,为更好利用声学方法探测和评价储层提供坚实的物理基础和可能的技术支撑。     

The ground state energy of the Edwards-Anderson spin glass model with a parallel tempering Monte Carlo algorithm

We study the efficiency of parallel tempering Monte Carlo technique for calculating true ground states of the Edwards-Anderson spin glass model. Bimodal and Gaussian bond distributions were considered in two- and three-dimensional lattices. By a systematic analysis we find a simple formula to estimate the values of the parameters needed in the algorithm to find the GS with a fixed average probability. We also study the performance of the algorithm for single samples, quantifying the difference between samples where the GS is hard, or easy, to find. The GS energies we obtain are in good agreement with the values found in the literature. Our results show that the performance of the parallel tempering technique is comparable to more powerful heuristics developed to find the ground state of Ising spin glass systems.     

Ultrafast laser written active devices

Direct‐write optical waveguide device fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics at the present time. Devices such as buried waveguides, power splitters, couplers, gratings, optical amplifiers and laser oscillators have all been demonstrated. This paper reviews the application of the femtosecond laser direct‐write technique to the fabrication of active waveguide devices in bulk glass materials.     

热管吸液芯的研究进展

文中对热管内吸液芯的研究进展进行了阐述,着重从对热管传热性能起主要影响作用的比表面积、孔隙率、渗透率、有效毛细半径、密度、有效导热系数等结构参数方面进行了分析,最后介绍了多孔泡沫金属这一新型的热管吸液芯,并指出了今后的研究方向.     

Wavelength tuning in Er3+,Yb3+:glass microchip lasers

The paper presents the investigation results of laser generation around 1.5 μm at different wavelengths. The shifts of the wavelength were achieved by the change of pump power, transmission of an output mirror, and length of an active medium. Mathematical analysis and explanation of this phenomenon was curried out on the basis of the change in relation between the gain and loss lines.     

掺锡As2S8薄膜光折变效应及其在条波导制备中的应用研究

实验研究了Sn₁As₂₀S₇₉非晶态半导体薄膜的光折变效应及其膜厚变化的现象,归纳了沉积态样品、退火态样品和光饱和态样品的实验规律,提出和采用紫外光激励的方法试制了Sn₁As₂₀S₇₉条形波导,632.8 nm波长导模激励显示该波导具有良好的导波特性. 关键词： 光波导技术 硫属化合物玻璃 光阻断效应 光折变效应     

Tm3+和 Yb3+共掺杂PGETYA玻璃的直接敏化上转换发光

制备了一种稀土离子掺杂的PGETYA氟氧玻璃材料,它不仅具有较高的上转换发光效率,而且还避免了氟化物基质的缺点。其组分为58.52PbF₂-34.43GeO₂-3Al₂O₃ -0.05Tm₂O₃-4Yb₂O₃,以共掺杂Tm³⁺和Yb³⁺离子为上转换研究的对象。测量了该玻璃系统在980 nm LD激发下的上转换发光光谱,观察到很强的476 nm的蓝色荧光,它来源于Tm³⁺离子的¹G₄→³H₆跃迁。同时,还有两个较弱的红色荧光来源于Tm³⁺离子的¹G₄→³H₄和³F₃→³H₆跃迁。对上转换发光强度与泵浦电流关系曲线的拟合结果表明:此材料的蓝色上转换为三光子过程,红色上转换为双光子过程。     

无序二维约瑟夫森结阵列中磁场引起的涡旋玻璃态相变

采用电阻阻错结的无序二维约瑟夫森结阵列模型,数值研究超导薄膜中垂直磁场引起的涡旋运动.通过分析磁场激发产生的涡旋度Ne及低频电压噪声S₀的变化特性,得到如下结论：在无序超导体中固定温度不变,随着磁场的减弱涡旋液态经过准有序的布拉格相,涡旋玻璃相重新进入到低磁场下的钉扎稀磁液相. 由于在涡旋玻璃相中,电流驱动下的噪声值表现出一个峰,表明系统处于无序与有序相互竞争的亚稳态,并且临界电流应有峰值效应. 计算得到噪声值的变化与Okuma等得到的无序超导Mo_xSi_1-x膜实验现象一致,并能解释磁场降低引起的重新进入钉扎的稀磁液相行为. 关键词： 约瑟夫森结阵列 磁通玻璃 重新进入 峰值效应     

酸溶法光纤传像束酸溶工艺的研究

在实验的基础上给出了酸溶玻璃的基本组成、制备工艺及性能参数,论述了酸溶法光纤传像束酸溶机理,酸溶工艺及影响像束酸溶的一些因素。实验结果表明,选用合适的酸溶液,控制好酸的浓度、温度和时间的量化关系,对于降低传像束的断丝率,提高传像束的性能及其良品率,具有非常明显的效果。