A Siloxane Homopolymer with Interacting Ferrocenes as a New Material for the Preparation of Sensors Based on the Detection of Hydrogen Peroxide

The electrochemical characterization of a hydrogen peroxide sensor based on a ferrocene‐containing polymer electrochemically deposited onto a platinum electrode is described. The redox polymer consists of a siloxane‐based homopolymer, with pendant electronically communicated ferrocenyl moieties. The electrodes were used as the transducer for glucose and lactate‐sensing enzyme sensors. Amperometric biosensors were prepared by immobilization of glucose oxidase (Gox) or lactate oxidase (Lox) onto these modified electrodes. The steady‐state amperometric response of the sensors is investigated as a function of the applied potential and substrate concentration. Interferences, sensitivity and stability of the sensors were also studied.     

Activity coefficients of electrolytes from the E.M.F. of liquid membrane cells. II - multicharged electrolyte solutions

The activity coefficients of Co(en)₃Cl₃ and K₂SO₄ were measured by means of a cell with ion-exchange liquid membranes following the method described in paper I. The results prove that this method is even more valuable with multicharged salts than with 1-1 electrolytes. The values obtained are precise and reliable down to dilution limits never before accessible, e.g., 4×10^–5 mol-kg^–1 in Co(en)₃Cl₃. High dilution levels are of particular importance when dealing with highly charged electrolytes since the trend at higher concentrations often leads to errors both in extrapolation to infinite dilution and in the absolute activity coefficients. As an application, the activity coefficients of [Co(en)₃]₂(SO₄)₃-suspected to be wrongly evaluated in past literature-were measured, and their values at low concentrations were actually lower than those quoted before.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: preparation and some spectrometric studies

Chemical species obtained by reaction of 5-amino-1, 10-phenanthroline with ethanedial (glyoxal) are reported with regard to their preparation, chemical composition and spectrometric characterization (UV-visible, infrared and liquid secondary ion mass spectrometry). Products of the reaction are postulated to be a mixture of species with molecular weights of 339, 371,480 and 524 u. Chemical reactions leading to these products and possible structural formulas for each of these species are presented. The iron complexes of these ligands, because of their extremely low solubility in most solvents, find application as redox mediators when incorporated in carbon paste electrodes, particularly for sensing in continuous-flow systems.     

Fast chromatographic separation of (−)-menthyl chloroformate derivatives of some chiral drugs,with special reference to amlodipine,on porous graphitic carbon

Summary Enantiomeric separation of (–)-menthyl chloroformate derivatives of some chiral cardioactive drugs, on porous graphitic carbon (PGC), Hypercarb-S, is described. Capacity and separation factors of derivatives of the calcium channel blockers; amlodipine and UK52.829, the -blockers; atenolol, sotalol and propranolol, and mexiletine were studied in different chromatographic systems based on dichloromethane. A high content of a carboxylic acid in the mobile phase was found to decrease the retention and positively affect the stereoselectivity of the derivatives. A mobile phase with dichloromethane, acetonitrile and formic acid gave baseline separation of the enantiomers of amlodipine in less than 8 minutes. Results show that acetic acid and formic acid, may be regarded as strong organic solvents in PGC chromatography with nearly the same elution power as dichloromethane.     

Potentiometric pH response of membranes prepared with various aminated-poly (vinyl chloride) products

The preparation and potentiometric pH response properties of membranes formulated with various aminated-poly(vinyl chloride) (PVC-NH₂) products are described. Products containing secondary and/or primary amino functional groups are obtained by modifying PVC with mono- and/or diamines, respectively. Blank membranes prepared with either type of aminated-polymer exhibit nearly Nernstian potentiometric pH responses over different pH ranges. In general, membranes based on diamino products exhibit pH response over a wider range (5–10.5) than membranes formulated with monoamino products (<8.0). These potentiometric results are used to estimate the basicity of the various primary and secondary amino sites in the membrane phases.Dedicated to Professer W. Simon on the occasion of his 60th birthday     

Evaluation of a PVC‐Based Thionine‐Zeolite and Zeolite Free Membranes as Sensing Elements in Ion Selective Electrode

The construction and performance characteristics of thionine electrodes based on the ion‐pair complex thionine‐tungstophosphate and thionine‐mordenite zeolite embedded in a polyvinyl chloride (PVC) matrix is described. Thionine electrode based on the ion‐pair is used for the indirect determination of ascorbic acid by standard addition method.     

Increased electrochemical detector sensitivity by electrode surface modification

Summary Electrode surface modification by electrochemical pretreatment of glassy carbon electrodes was shown to enhance significantly the sensitivity of the electrodes for the detection of timolol and oxprenolol, but reduce slightly the sensitivity to prenalterol. This method may permit the detection of exprenolol and timolol with increased sensitivity, or may allow their detection at lower applied potentials than is presently possible. Electrode surface modification may prove to be a valuable aid to the detection of compounds that are considered to be outside the practical limits of electrochemical detection.     

Transport properties and electroanalytical response characteristics of drotaverine ion-selective sensors

The construction and electroanalytical response characteristics of poly(vinyl chloride) matrix ion-selective sensors (ISSs) for drotaverine hydrochloride are described. The membranes incorporate ion-association complexes of drotaverine with tetraphenylborate, picrate, tetraiodomercurate, tetraiodobismuthate, Reinecke salt, and heteropolycompounds of Keggin structure—molybdophosphoric acid, tungstophosphoric acid, molybdosiliconic acid and tungstosiliconic acid as electroactive materials for ionometric sensor controls. These ISSs have a linear response to drotaverine hydrochloride over the range 8×10^–6 to 5×10^–2 mol L^–1 with cationic slopes from 51 to 58 mV per concentration decade. These ISSs have a fast response time (up to 1 min), a low determination limit (down to 4.3×10^–6 mol L^–1), good stability (3–5 weeks), and reasonable selectivity. Permeabilities and ion fluxes through a membrane were calculated for major and interfering ions. Dependences of the transport properties of the membranes on the concentrations of the ion exchanger and near-membrane solution and their electrochemical characteristics are presented. The ISSs were used for direct potentiometry and potentiometric titration (sodium tetraphenylborate) of drotaverine hydrochloride. Results with mean accuracy of 99.1±1.0% of nominal were obtained which corresponded well to data obtained by use of high-performance liquid chromatography.     

Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.