Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

用选择离子流动管质谱测定汽油和柴油蒸汽成分

采用选择离子流动管质谱(SIFT／MS)装置，以H30^ 、N0^ 为初始离子对汽油和柴油蒸汽进行了研究，质谱分析表明，汽油和柴油主要由C—H化合物组成，包括烷烃、环烷烃、烯烃、炔烃、二烯烃以及芳香烃。在这几种成分中，烷烃都占有最大的比例；汽油蒸汽和柴油蒸汽最大的区别是柴油蒸汽中长链大分子的挥发性C—H化合物所占的比例远远高于汽油蒸汽。文中还给出了以H30^ 、N0^ 为初始离子所得到的汽油蒸汽的质谱图，以及汽油、柴油蒸汽中各种成分的定量分析结果。     

Electrolytic Co3O4 for thin-layer anodes of lithium-ion batteries

Electrolytic (e) cobalt oxide of a spinel structure, e-Co₃O₄, is obtained from the sulfate and nitrate (aqueous, water-alcohol) solutions containing Co²⁺ with the aim of using it in thin-layer anodes of lithium-ion batteries. The physicochemical and structural properties of the synthesized compounds are examined using thermal and x-ray diffraction analyses, absorption IR spectroscopy, and atomic force microscopy. The electrochemical characteristics of e-Co₃O₄ are determined in breadboards of lithium power sources and in the lithiumion system LiCoO₂/e-Co₃O₄.     

Product analysis and mechanism of toluene degradation by low temperature plasma with single dielectric barrier discharge

A single dielectric barrier discharge (DBD) low-temperature plasma reactor was set up, and toluene was selected as the representative substance for volatile organic compounds (VOCs), to study the reaction products and degradation mechanism of VOCs degradation by low-temperature plasma. Different parameters effect on the concentration of O₃ and NO_x during the degradation of toluene were studied. The exhaust in the process of toluene degradation was continuously detected and analyzed, and the degradation mechanism of toluene was explored. The results showed that the concentration of O₃ increased with the increase of the power density and discharge voltage of the plasma device. However, as the initial concentration of toluene increased, the concentration of O₃ basically keep steady. The concentration of NO_x in the by-products increased with the discharge voltage, power density, and initial concentration of toluene in the plasma device, and the concentration of NO₂ was much higher than the concentration of NO. The degradation process of toluene was detected and analyzed. The results showed that the degradation mechanism of toluene by plasma includes high energy electron bombardment reaction, active radical reaction and ion molecule reaction. Among them, the effect of high-energy electrons on toluene degradation is the largest, followed by the effect of free radicals, in which oxygen radicals participated in the reaction mainly through the formation of C–O bond, CO bond, (CO)–O– bond and –OH radical, while nitrogen radicals participate in the reaction mainly through the formation of C–NH₂, (CNH)- bond, CN bond and C–NO₂ bond. The results can provide some data supports for the study of low-temperature plasma degradation of VOCs.     

The effect of gas injection on a thermal argon plasma flow in a water-cooled tube

The effect of gas injection on an atmospheric thermal argon plasma flow in a water-cooled tube was investigated experimentally and numerically. The injection gas is argon, helium, or nitrogen. The static pressure with helium injection increases greatly because of its high thermal conductivity, while little increase occurs for nitrogen injection because of the dissociation. The increasing rate of the static pressure depends on the ratio of the momentum term to the viscosity term. The heat flux to the tube wall with gas injection changes less than that without injection. The numerical results showed variations similar to the experimental ones.     

Quadrupole mass spectrometric study of positive ions from RF plasmas of pure CH4, CH4/H2, and CH4/Ar systems

Quadrupole mass spectrometry has been employed to characterize the ionic species in the discharges of pure CH₄, CH₄/H₂, and CH₄/Ar systems. For pure methane, the major positive ions in the discharge at low pressure (e.g., 0.15 torr) are CH ₃ ⁺ , C₂H ₃ ⁺ , CH ₂ ⁺ , C₂H ₂ ⁺ , CH ₄ ⁺ , C₂H ₄ ⁺ , and C₂H ₅ ⁺ at high pressure (e.g., 0.5 torr) the major ions are CH ₃ ⁺ , C₂H ₃ ⁺ , C₂H ₅ ⁺ , C₃H ₃ ⁺ , C H₃H ₇ ⁺ , C₄H ₇ ⁺ , C₅H ₇ ⁺ , C₆H ₅ ⁺ , and C₇H ₇ ⁺ . The relative abundances of C₁ ions decrease with increasing pressure, whereas those of higher-order ions increase with pressure. For 5% CH₄ + 95% H₂ mixture, in addition to those sampling from the pure methane plasma at the lower pressure, H _n ⁺ ions have also been detected. For 5% CH₄ +95% Ar mixture, the principal ions are CH ₃ ⁺ , CH ₂ ⁺ , CH⁺, CH ₅ ⁺ , Ar⁺, and ArH⁺; the ions containing more than two carbon atoms are negligible. In these discharges, the CH ₃ ⁺ and C₂H ₃ ⁺ are the most important positive ions in C₁ and C₂ ions, respectively. The ions detected are believed to come from the sheath between the electrode and the luminous plasma, and have high kinetic energy. An ion-molecule reaction mechanism is proposed which can well explain the observed main features of ionic products.Died June 1, 1991.     

Raman spectra of aqueous lithium sulfate and potassium thiocyanate in strong electric fields

The effects of high-voltage pulsed discharge (HVPD) activation on the Raman spectra of saturated aqueous solutions of lithium sulfate (Li₂SO₄/H₂O) in the range of the ν₁(A) totally symmetric vibrations of the SO ₄ ^2? anion and on the spectra of potassium thiocyanate KSCN/H₂O in the region of the ν₁(C≡N) vibrations of the SCN^? anion have been studied. The temperature dependences of the width and frequency of the corresponding spectral lines have been investigated.     

Spatial relaxation of electrons in nonisothermal plasmas

The spatial relaxation of electrons to homogeneous states under the action of space-independent electric fields is investigated in helium, krypton, and N₂ plasmas for various electric field strengths. These investigations are based on a new method recently developed for solving the one-dimensional inhomogeneous electron Boltzmann equation in weakly ionized, collision-dominated plasmas. Elastic as well as conservative inelastic collisions of electrons with gas atoms have been included in the kinetic treatment. The spatial relaxation is caused by an imposed direct disturbance in the velocity distribution of the electrons on a spatial boundary. A pronounced dependence of the relaxation structure and the resultant relaxation length on the atomic data of the electron collision processes in different gases has been found. Furthermore the relaxation process sensitively depends on the electric field strength in the region of medium field values.     

Thin Films Deposition from Hexamethyldisiloxane and Hexamethyldisilazane under Dielectric-Barrier Discharge (DBD) Conditions

Hexamethyldisiloxane (HMDSO) and hexamethyldisilazane (HMDSN) were used as organosilicon reagents for PE-CVD of thin films under filamentary barrier-discharge conditions at atmospheric pressure. Efficient discharges were obtained in the region of moderate frequencies (5 kHz). The following mixtures of organosilicon reagents with carrier gas and oxidants or ammonia were investigated: HMDSO+Ar, HMDSO+N₂, HMDSO+O₂+Ar, HMDSO+N₂O+Ar, and HMDSN+NH₃+N₂. Under such conditions HMDSO was converted to produce thin films (10–1000 nm) of silicon oxide, generally containing admixtures of residual organic content (Si—CH_n and Si—H groups). The films deposited from HMDSN+NH₃+N₂ contained silicon, nitrogen and oxygen.     

大气压旋转螺旋状电极辉光放电等离子体催化甲烷偶联

采用新研制的具有旋转螺旋状电极的大气压辉光放电等离子体反应器催化甲烷偶联制碳二烃. 实验采用铜电极和不锈钢电极分别考察了输入电场峰值电压和甲烷、氢气进料流量等参数对甲烷转化率和碳二烃收率、选择性的影响. 在长时间连续反应无明显积碳的情况下, 最佳试验结果是电极材料为金属铜, 进料流量为60 mL•min^-1, V(CH₄ )/V(H₂)=1的条件下, 输入电场峰值电压为2.3 kV时, 甲烷转化率为70.64%, 碳二烃单程收率及其选择性分别为69.85%和 99.14%.