双功能受阻胺与紫外线吸收剂并用的协同效应研究

本文用IR、UV、ESR、TLC等方法研究了新型的双功能受阻胺光稳定剂,Tinuvin-144 [2-(4′-羟基-3′,5′-二叔丁基)苄基-2-正丁基丙二酸五甲基哌啶醇酯]与紫外线吸收剂,UV-531(2-羟基-4-正辛氧基二苯甲酮)和UV-327(2-[2′-羟基-3′,5′-二叔丁基]-5-氯 代苯并三唑)并用体系对聚丙烯光稳定化的并用效应。结果表明,Tinuvin-144与UV-531,UV-327并用时均具有良好的协同效应,144对531,327或531,327对144的光分解均具有相互的保护作用。结果还表明,144与531或327无论在模拟体系或聚丙烯中,在诱导期内均不存在促使他们消耗的化学反应,提出了协同作用的机理。     

第三相界面对高分子共混物粗化过程的影响研究

共混物相分离的机理已有研究［１］．但对共混物分散相的粗化过程的研究则不多见．１９７７年,Ｃａｈｎ等［２］预言第三相界面与低分子共混物之间存在的浸润作用对相分离过程应有较大影响．近年Ｔａｎａｋａ等［３］的研究结果表明,在几何空间受限的条件下,含有小分子...     

尼龙6/多单体接枝聚丙烯共混物的形态结构及力学性能的研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯（ Ｇ Ｍ Ａ） 和苯乙烯（ Ｓｔ） 共同接枝于聚丙烯（ Ｐ Ｐ） 上,制得多单体接枝聚丙烯 Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） ．该接枝物具有高的 Ｇ Ｍ Ａ 接枝率．本研究利用 Ｆ Ｔ Ｉ Ｒ、 Ｓ Ｅ Ｍ、 Ｔ Ｅ Ｍ、 Ｄ Ｓ Ｃ 和力学性能测试等分析方法,研究了多组分熔融接枝聚丙烯（ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）） 对尼龙６／ Ｐ Ｐ 共混物的形态结构, Ｔｇ 和力学性能的影响．结果表明, Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） 中的环氧基团与尼龙６（ Ｐ Ａ６） 末端的胺基发生化学反应,原位形成的 Ｐ Ｐ Ｐ Ａ６ 共聚物能有效的改善 Ｐ Ａ６ 与 Ｐ Ｐ 的相容性,可以使 Ｐ Ｐ 均匀的分散在 Ｐ Ａ６ 基体中,相区尺寸明显减小,提高了拉伸强度．由于两相的相容性较好,从而共混物的 Ｔｇ 有明显的变化．此外,通过透射电镜观察,发现 Ｐ Ａ６／ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）（７０／３０） 合金中存在着特殊的微相分离结构．     

尼龙6/多单体接枝聚丙烯合金中的微相分离结构

近年来,有关高聚物微相分离结构的研究不断深入,发现了许多新的微相分离形态.但这些研究几乎全部集中在嵌段或接枝共聚物上,即共聚物本身具有的链结构导致了微相分离结构.     

褐煤蜡树脂中多环芳烃组成的研究

采用气相色谱法对云南寻甸褐煤蜡树脂和吉林舒兰褐煤蜡树脂,进行了多环芳烃分布特征的研究,从树脂中鉴定出６８个化合物的同系物。两个树脂样均以菲系化合物占有优势,舒兰树脂中菲系列量约三倍于寻甸树脂的相应量     

Methods for correlating T1ρ and FID components in wideline H NMR studies of motionally heterogeneous polymer systems

We address the problem of correlating the observed FID and T_1ρ components in wideline ¹H relaxation measurements of motionally heterogeneous polymers, and show that different methods of data treatment can highlight different aspects of the correlations present. For a sample of polypropylene we find that the T_1ρ relaxation behaviour is driven by relaxation associated with the intermediate FID component, which strongly suggests a motionally inhomogeneous amorphous region in the sample.     

Effect of the liquid–liquid phase separation on the crystallization behavior of a poly(ethylene‐ran‐vinyl acetate) and paraffin wax blend

The effect of liquid–liquid phase separation (LLPS) on the crystallization behavior of poly(ethylene‐ran‐vinyl acetate) with a vinyl acetate content of 9.5 wt % (EVA‐H) in the critical composition of a 35/65 (wt/wt) EVA‐H/paraffin wax blend was investigated by small‐angle light and X‐ray scattering methods and rheometry. This blend exhibited an upper critical solution temperature (UCST) of 98°C, and an LLPS was observed between the UCST and the melting point of 88°C for the EVA‐H in the blend. As the duration time in the LLPS region increased before crystallization at 65°C, both the spherulite size and the crystallization rate of the EVA‐H increased, but the degree of the lamellar ordering in the spherulite and the degree of crystallinity of the EVA‐H in the blend decreased. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 707–715, 2000     

Isolation and Characterization of Wax Esters in Fennel and Caraway Seed Oils by SPE-GC

A rapid method for the isolation and quantitative determination of wax esters in vegetable oils was developed. For the first time wax esters in oils were separated from the triglyceride matrix by means of solid-phase extraction, which allows rapid sample preparation in parallel and therefore a high sample throughput. The thus obtained wax ester fractions of fennel and caraway seed oils were analyzed by high temperature gas chromatography. GC-MS analyses were carried out using electron impact ionization in order to characterize the wax ester fraction. With respect to the results of the GC-MS analyses different isomers of saturated wax esters with the same carbon number were observed. Additional monounsaturated wax esters with an unsaturated fatty acid moiety were identified.     

木蜡油涂饰对檀香紫檀易混树种的红外光谱影响分析

卢氏黑黄檀和染料紫檀木材特征与檀香紫檀相似,特别是两者经过加色精的木蜡油涂饰后,用肉眼很难与珍贵的檀香紫檀分辨。市场上销售的很多红木家具为了达到防腐、防尘、防开裂的性能以及提高红木表面光泽度和显现珍贵木材的纹理,大都进行了木蜡油表面涂饰加工,因而只研究木材本身的鉴别不能满足市场需求。借助红外光谱（FTIR）结合二阶导数红外光谱（SDIR）和二维相关红外光谱（2D-IR）技术,对经过木蜡油涂饰的檀香紫檀（Pterocarpus santalinus）、染料紫檀（P.tinctoricus Welw）和卢氏黑黄檀（Dalbergia louuelii）进行了红外光谱分析。通过打磨-涂底油-打磨-涂面油-干燥的涂饰工艺对3个树种进行表面涂饰。分别取3个树种素材的木粉和经过表面涂饰的木材表面的木粉进行FTIR,SDIR和2D-IR三级鉴别分析,同时测定了木蜡油的FTIR谱图。结果表明：(1）木蜡油FTIR谱图在2 925,1 733,1 465和1 378 cm-1较强的特征峰出峰位置与3个树种木材本身的出峰位置基本重合,且在2 854 cm-1处归属于亚甲基C-H对称伸缩振动,1 233 cm-1处归属于羧基C-O伸缩振动,729 cm-1处归属于长链的亚甲基C-H弯曲振动的特征峰在涂饰后三种样品的FTIR谱图中有相同的体现,说明木蜡油涂饰未对3个树种红外谱图的特征峰产生影响;3个树种表面涂饰前后FTIR谱图的相关系数同时可以对木蜡油涂饰未对3个树种的特征峰产生影响进行佐证;(2）FTIR谱图在1 595,1 060和836 cm-1处可以将染料紫檀与檀香紫檀和卢氏黑黄檀两个树种区分开;SDIR谱图可以在1 551 cm-1将卢氏黑黄檀区分开,并能进一步对染料紫檀的特征峰进行验证;在2D-IR光谱中,在1 425~1 800和850~1 300 cm-1两个波段范围,檀香紫檀的自动锋明显区别于其他两个树种,在1 250 cm-1处归属于醚类化合物的吸收峰可以将檀香紫檀区分开。目前红木识别主要利用木材解剖方法,表面涂饰大多集中在木材材色变化研究。借助红外光谱技术,最终利用各个树种和木蜡油在红外光谱谱图中不同的特征峰体现的官能团差异直接推测特征成分的含量差异,无须测定其特征成分的具体物质,进而实现准确、快速地把经木蜡油表面涂饰的檀香紫檀及与其易混淆的染料紫檀和卢氏黑黄檀区分鉴别。     

Mechanical and Thermal Properties of Polypropylene/Silica Aerogel Composites

Polypropylene (PP) composites including various amounts of silica aerogel (SA) microparticles were prepared by melt mixing in an internal mixer. The morphology and microstructure of the prepared composites were investigated by scanning electron microscopy (SEM). Mechanical properties of the samples, including elastic modulus, tensile stress, elongation and stress at break, were measured by tensile tests. In addition, the other mechanical features, including Izod impact strength, hardness and wear resistance, were evaluated and then related to the structure of the PP/SA composites. Furthermore, the thermal characteristics of the composites, such as heat deflection temperature and thermal stability, were studied by thermal gravimetric analysis (TGA). The SEM photographs indicated the satisfactory SA particles dispersion for the compositions of 1% and 3% but agglomeration of the aerogels at higher SA contents. Since the composites became stiffer, the impact and tensile strength decreased. The addition of the SA to the PP matrix yielded harder samples with lower weight loss and coefficients of friction in wear tests. The TGA evaluations confirmed that the presence of SA promoted and upgraded the thermal stability and heat deflection temperature of PP. The thermal results proved the superior potential of PP as an insulator when the SA particles were added.