Polypropylene/poly(butyl methacrylate) blends prepared by diffusion and subsequent polymerization of butyl methacrylate in isotactic polypropylene pellets

Polypropylene/poly(butyl methacrylate)(PP/PBMA) blends were prepared by diffusion and subsequent polymerization of butyl methacrylate(BMA) in commercial isotactic polypropylene(iPP) pellets.The diffusion kinetics,diametrical distribution of PBMA in a pellet and phase morphology of a typical PP/PBMA blend were investigated.     

Gel production, oxidative degradation and dielectric properties of isotactic polypropylene irradiated under various atmospheres

In this work, changes in structure and physical properties of stabilized isotactic polypropylene (iPP) were created by gamma irradiation, up to a dose of 700 kGy, in different media: air, deionised distilled (DD) water and acetylene. Gel and infrared (IR) spectroscopy measurements were used to determine the changes in the degree of network formation and oxidative degradation, respectively. Sol-gel analysis was studied in detail using the Charlesby-Pinner (C-P) equation. The radiation-induced changes in the structure and evolution of oxygen-containing species were also studied through dielectric loss (tan δ) analysis in a wide temperature and/or frequency range. Evolution of low temperature dielectric relaxations with gamma irradiation was investigated. In the case of dielectric relaxation measurements, the polar groups that were introduced by irradiation in non-polar iPP were considered as tracer groups. Conclusions derived according to different methods were compared.     

Thermal oxidation of clay-nanoreinforced polypropylene

The thermo-oxidation process at low temperatures for a montmorillonite-nanoreinforced polypropylene (PP) was studied. Experimental aging kinetic data at 100, 80 and 60 °C have been obtained and compared with a computational simulation in which a kinetic model based on the closed loop approach was used. As a result, it has been found that the montmorillonite role is not limited to a role of inert filler in the polymer matrix but induces a slight catalytic effect leading to induction period reduction. This effect has been well simulated by increasing initial hydroperoxyde concentration. The consequences of kinetic control by oxygen diffusion have also been investigated by using micro ATR-FTIR mapping to assess concentration profiles of the oxidation products across the sample thickness. It has been found that the oxidized layer thickness is close to 17 μm for the pure polypropylene whereas it is around 10 μm for the nanocomposite at 100 °C. These profile variations have been attributed to differences in oxygen diffusion coefficient values. Simulations based on the kinetic model including diffusion-reaction coupling describe these profiles well.     

BEHAVIOR OF CHO CELLS ON MODIFIED POLYPROPYLENE BY LOW TEMPERATURE AMMONIA PLASMA

1. INTRODUCTION Bioreactors using membranes as substrates of cell cultures have become widely used for hybrid liver support systems [1]. For enhancing and prolonging the metabolism of the bioreactors, cytocompatible membranes are necessary because the cell culture is closely affected by the substrate surface. Surface factors considered to be important in cell culture are the concentration of ionic groups, the nature of polar and non-polar groups and the hydrophilic-hydrophobic balance [2].…     

The role of transient rheology in polymeric sintering

The initial theory of Frenkel and Eshelby for the coalescence of drops in air (or sintering) of Newtonian fluids, which equated the work of surface tension to the work done by viscous stresses while assuming biaxial extensional flow kinematics, was extended to the case of time-dependent material functions using the Upper Convected Maxwell (UCM) model. A numerical scheme was developed to solve the ordinary differential equations (ODE) for the stresses, which are embedded in the ODE based on the mechanical energy balance. Initial conditions required to solve the set of non-linear ODEs were obtained from visualization experiments of the coalescing drops as the theory for elastic contact gave unrealistically high values of the initial neck radius. The transient model predicted that coalescence was accelerated by increasing the relaxation time, the opposite relationship of what was predicted by the steady-state UCM formulation, and was capable of quantitatively predicting the experimental coalescence rates at times when viscoelasticity was important.     

Local fracture resistance based on microstructural efficiency concept and simulation of injection molding

Local fracture resistance (FR) of short (SGF) and discontinuous long glass fibre (LGF) reinforced polypropylene (PP) was predicted using the ‘microstructural efficiency concept’ together with a simulation program for fibre orientation in injection molding. The ‘microstructural efficiency concept’ describes the relation between microstructural parameters such as the fibre content, the fibre aspect ratio and the processing (injection molding) induced layer structure taking also into account the local fibre orientation. The local fibre orientation in injection molding was predicted with the MOLDFLOW^®-software. The predicted local FR was compared with the measured one, which was determined by using compact tension samples and linear elastic fracture mechanics (LEFM). The comparison showed, that for SGF-PP good consistence between the predicted and measured FR existed, for LGF-PP the discrepancy was higher. Yet for both materials, the ‘microstructural efficiency concept’ together with the results obtained from the simulation of the fibre orientation can be used for FR prediction of an injection molded workpiece.     

The effect of slip in the flow of a branched PP melt: experiments and simulations

In this paper visualisation and direct velocity profile measurement experiments for a branched polypropylene melt in a 10:1 axisymmetric contraction demonstrate the onset of wall slip. Video processing of the flow shows the formation of vortices and their diminution with increasing flow rate. Numerical simulations using a multimode K-BKZ viscoelastic and a purely viscous (Cross) model—both of them incorporating a nonlinear slip law—were used to predict the flow kinematics and dynamics as well as to deduce the slip velocity function by performing fitting to the velocity profiles. It was found that the numerical predictions agree well with the experimental results for the velocity profiles, and vortex formation, growth and reduction. It is suggested that such experiments (visualisation of entrance flow and direct velocity profile measurement) can be useful in evaluating the validity of constitutive equations and slip laws in the flow of polymer melts through processing equipment.     

Fracture toughness assessment of polypropylene random copolymer with multiple stress modes using the essential work of fracture theory

In recent years, the essential work of fracture (EWF) method has been extensively employed for assessing a material's toughness by specific essential fracture work, especially for polymers showing ductile failure. However, most research has studied either the in-plane stress mode or the out-of-plane stress mode. To obtain a more in-depth understanding of the EWF theory, the specific essential and non-essential fracture work of polypropylene random copolymer (PP-R) was investigated in both in-plane stress mode and out-of-plane stress mode. The effects of ligament length, amount of pre-cracking and pre-cracking method on the specific essential and non-essential fracture work were explored. The specific essential fracture work obtained in both stress modes is compared and discussed.     

Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylene/mineral oil oleogels

The overall objective of this work was to study the effect of reprocessing cycles of isotactic polypropylene (PP) on the rheological behavior and microstructure of gel-like dispersions in mineral oil. PP was subjected to 10 reprocessing cycles and oleogel samples were further prepared by using the mixing rheometry technique and characterized from a rheological point of view and polarized light optical microscopy (PLOM). Recycled polymer samples were also characterized by means of rheological measurements, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate the property changes induced by reprocessing. The values of different linear viscoelastic functions (elastic modulus and complex viscosity) of recycled PP decrease with the number of reprocessing cycles, which influences oleogel rheological response. An empirical exponential correlation between the storage modulus (G′) of PP samples and the plateau modulus ($G_N^o$) of oleogels has been proposed to predict the rheological behavior of oleogels. Results were explained considering the scission of PP chains induced by the thermomechanical reprocessing treatment applied.     

Flame-retardant Wrapped Ramie Fibers towards Suppressing “Candlewick Effect” of Polypropylene/Ramie Fiber Composites

In this work, a flame-retardant polypropylene(PP)/ramie fiber(RF) composite was prepared. The ramie fibers were wrapped chemically by a phosphorus- and nitrogen-containing flame retardant(FR) produced via in situ condensation reaction so as to suppress their candlewick effect. Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy(SEM) demonstrated that the ramie fibers wrapped chemically by FR(FR-RF) were obtained successfully. Thermogravimatric test showed that the PP/FR-RF composite had more residue and better thermal stability at high temperatures than the PP/RF composite. Cone calorimeter(CC) results indicated that the peak of heat release rate(PHRR) and total heat release(THR) correspondingly decreased by 23.4% and 12.5% compared with the values of neat PP/RF. The PP/FR-RF composite created a continuous and compact char layer after the combustion. Combining FTIR analysis of char residue after CC test with heat conduction coefficient results, it could be concluded that the charring of FR on RF greatly weakened the candlewick effect of RF, and more char residue in the RF domain facilitated the formation of more continuous and compact char layer in the whole combustion zone, consequently protected PP composites during combustion, resulting in the better flame retardancy of PP/FR-RF composite than that of PP/RF composite.