预辐射聚丙烯反应挤出接枝丙烯酸的研究

利用电子束(EB)预辐照方法和反应挤出技术制备了聚丙烯接枝丙烯酸共聚物PP-g-AA. 采用化学滴定、红外光谱、偏光显微镜(PLM)、DSC和广角X射线衍射(WAXD)对接枝产物进行了表征. 研究结果表明, 接枝率随辐照剂量增加而增大并逐渐达到平台值, 但随单体浓度增大而表现为线性增加, 接枝链能起到异相成核作用, 从而提高了结晶速率并细化了球晶. 同时, 熔体流动速率(MFR)和力学性能测试结果表明, 预辐射和挤出过程造成了PP严重降解, 据此可认为接枝反应主要发生在聚丙烯断裂分子链的末端.     

聚丙烯/纳米级金红石型二氧化钛/聚烯烃弹性体复合材料的抗老化性能研究

采用TEM和UV-Vis等测试手段表征了金红石型纳米级TiO2和体相TiO2的性能特征;通过熔融共混法分别制备了PP/纳米级TiO2/POE和PP/体相TiO2/POE复合材料,采用GB/T16422·2-1999所述的塑料实验室光源暴露实验方法,用氙灯气候试验机对纯PP和复合材料进行28天人工加速老化.结果表明,二氧化钛粒子在PP/POE基体中分散性良好,而纳米粒子对PP/POE基体具有增韧作用;改性后的两类复合材料均具有优异的抗老化性能,而PP/(1·0wt%)纳米级TiO2/POE复合材料的抗老化性能更加优异,其加速老化28天后的无缺口冲击强度达到80·45kJ·m-2,比纯PP提高4倍多,而同期加速老化28天后的PP/(1·0wt%)体相TiO2/POE复合材料的无缺口冲击强度只有47·88kJ·m-2;对纯PP老化过程中的羰基指数和冲击性能的变化情况进行了分析,发现二者近似成线性关系,其相关系数r在0·9以上.     

聚丙烯胺肟螯合纤维的合成及其对铜（Ⅱ）离子的吸附

利用预辐照接枝法合成了聚丙烯胺肟螯合纤维，研究了影响接枝率，胺肟基团含量及离子吸附的因素，该纤维对铜的离子的吸附容量达０．６７ｍｍｏｌ／ｇ干纤维。     

成核剂含量对β晶相聚丙烯结晶与熔融行为的影响

用DSC研究了β成核剂含量对β聚丙烯在等温与非等温结晶条件下的结晶与熔融行为的影响,发现当成核剂含量为0.005％时,结晶焓△H_c、β晶的熔融焓△H_(mβ)及熔点T_(mβ)均为最大,而α晶的相对含量最小.广角X-衍射数据表明,成核剂含量高的试样的(301)衍射峰的相对强度下降,反映分子链排列的纵向有序性降低.根据聚丙烯分子在β成核剂上附生结晶的成核机理解释了上述结果.     

聚丙烯/无机纳米粒子复合材料的发泡行为

利用型腔体积可控注塑发泡装备制备聚丙烯/无机纳米粒子微发泡复合材料,通过复合材料的流变行为和结晶行为,分析了无机纳米粒子对聚丙烯发泡行为的影响。结果表明:无机纳米粒子有促进气泡异相成核作用,同时无机纳米粒子引入可以提高聚丙烯黏弹响应和降温结晶起始温度,起到了抑制泡孔结构恶化的作用,显著改善了聚丙烯的泡孔结构;在聚丙烯材料中添加纳米CaCO3、纳米OMMT、纳米SiO2进行发泡,以PP/OMMT发泡材料的发泡质量最理想,其泡孔密度和尺寸分别为2×106个/cm3和24.2μm。     

聚丙烯/聚乙烯共混物的辐射凝胶生成动力学研究

本文研究辐照PP/HDPE共混物的溶胶生成分数s与辐照剂量R的关系,结果表明适用于某些纯聚合物辐射交联规律的Charlesby-Pinner关系式和陈-刘-唐关系式皆不适用于PP/HDPE共混体系。张万喜等人曾研究过许多纯聚合物的辐射交联,提出裂解度正比于R~β的假定,β是与高分子结构相关的参数,这个假定可与大多数聚合物的辐射交联实验数据符合。同样的假定被应用于本文的共混体系,不同的是根据共混物结构特点对R~β项进行了必要的修正,即共混物的R~β=∑f_iR~(βI),其中f_i,β_i分别为共混物第i组分的重量分数及β值。用修正后的R~β处理辐照PP/HDPE共混物的实验数据,R(s+√s)～R~β,有很好的线性关系。     

STRUCTURING ＆ RHEOLOGY OF MOLTEN POLYMER／CLAY NANOCOMPOSITES

The evolution and the origin of “solid-like state” in molten polymer/clay nanocomposites are studied. Using polypropylene/clay hybrid (PPCH) with sufficient maleic anhydride modified PP (PP-MA) as compatibilizer, well exfoliation yet solid-like state was achieved after annealing in molten state. Comprehensive linear viscoelasticity and non-linear rheological behaviors together with WAXD and TEM are studied on PPCH at various dispersion stages focusing on time,temperature and deformation dependencies of the “solid-like” state in molten nanocomposites. Based on these, it is revealed that the solid-structure is developed gradually along with annealing through the stages of inter-layer expansion by PP-MA,the diffusion and association of exfoliated silicate platelets, the formation of band/chain structure and, finally, a percolated clay associated network, which is responsible for the melt rigidity or solid-like state. The network will be broken down by melt frozen/crystallization and weakened at large shear or strong flow and, even more surprisingly, may be disrupted by using trace amount of silane coupling agent which may block the edge interaction of platelets. The solid-like structure causes characteristic non-linear rheological behaviors, e.g. residual stress after step shear, abnormal huge stress overshoots in step flows and, most remarkably, the negative first normal stress functions in steady shear or step flows. The rheological and structural arguments challenge the existing models of strengthened entangled polymer network by tethered polymer chains connecting clay particles or by chains in confined melts or frictional interaction among tactoids. A scheme of percolated networking of associated clay platelets, which may in band form of edge connecting exfoliated platelets, is suggested to explain previous experimental results.     

共溶剂对超临界CO_2注入技术制备聚丙烯/SiO_2纳米复合材料的影响(英文)

采用超临界CO2注入技术制备聚合物-无机纳米粒子复合材料,以乙醇作为共溶剂,在超临界CO2中将正硅酸乙酯(TEOS)注入到聚丙烯(PP)中,重点研究共溶剂乙醇对TEOS在PP中注入率的影响.实验结果表明注入率随着共溶剂加入先增加后减小.同时研究了在共溶剂的存在下其他实验条件对注入率的影响.并采用卢瑟福背散射能谱法(RBS)分析了聚丙烯/SiO2纳米复合材料的注入元素深度分布,发现Si元素在PP中的浓度分布不均匀,随着深度的增加而减小.     

剪切对玻璃珠填充聚丙烯结晶行为的影响

应用Linkam CSS450剪切仪、广角X射线衍射仪(WAXD)和小角X射线散射仪(SAXS)等研究了剪切对玻璃珠填充聚丙烯结晶行为的影响, 结果表明, 与纯聚丙烯相比, 填加玻璃珠的聚丙烯体系中, 玻璃珠起到成核剂的作用, 不利于β晶的生成. 玻璃珠直径较小(4 μm)时, 剪切对聚丙烯β晶的生成影响较小; 当玻璃珠直径增加到35 μm时, 剪切速率为20 s-1左右最有利于β晶生成; 剪切速率和玻璃珠直径的增加, 有利于聚丙烯片晶的取向, 而且玻璃珠含量越高, 片晶的取向程度越大.     

Magnetic fluids stabilized by polypropylene glycol

A series of samples of magnetic fluids stabilized with low-molecular weight polypropylene glycol (PPG) of different molecular masses were synthesized. The use of PPG allowed the maximum extension of the carrier fluid range to include ethyl- and butyl-acetate, ethanol, butanol, acetone, carbon tetrachloride, toluene, kerosene and PPG itself. Magnetic and rheological properties of the samples were investigated. Based on the results of investigation it has been concluded that magnetic nanoparticles are covered by a monolayer of surfactant molecules. At low temperatures the propanol-based sample preserves fluidity up to −115 °C. Measurement of critical temperatures of other base fluids showed that alcohols are the best carrier medium. Coagulation stability of the ethanol-based ferrocolloid with respect to water and kerosene was explored. It has been found that kerosene, whose fraction by weight exceeds 22.5%, does not mix with the colloid. This effect can be used to produce magneto-controllable extractors of ethyl alcohol. Under the action of water the colloid coagulates, which allows one to substitute the carrier fluid and to separate the colloid into fractions.