聚合物强化辐射交联研究进展

本文综述卫应用含有多个Ｃ＝Ｃ不饱和基团的多官能团单体来强化辐射交联聚合物的研究进展，对强化交联的反应机理、多官能团单体的强化交联行为、强化交联的影响因素及强化交联的研究表征方法进行了介绍。     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

聚合物光老化、光稳定机理与光稳定剂(上)

大多数聚合物材料,包括塑料、橡胶、纤维、涂料等,在户外使用时会发生光老化而使使用寿命缩短。为有效防止聚合物材料的光劣化,人们已对聚合物的光老化和光稳定机理进行了广泛的研究并先后研发出了几个类型的光稳定剂。但由于户外应用范围不断扩大和环境不断恶化正使聚合物的光老化变得越来越复杂而光防护难度也日益加大,因此国内外有关聚合物光老化、光稳定机理的研究和光稳定剂的研发一直十分活跃。本文上篇主要阐述聚合物的光老化机理。     

蒸馏沉淀聚合过程中交联度对单分散聚合物微球形成的影响书

以苯乙烯为单体、二乙烯基苯（DVB）为交联剂，过氧化二苯甲酰（BPO）为引发剂研究了蒸馏沉淀聚合法制备聚合物微球过程中交联单体二乙烯苯的用量对单分散聚合物微球成球的影响。结果表明，增加二乙烯基苯的比例，即提高交联度有利于形成单分散的聚合物微球。     

Study of the α-relaxation of PVC, EVA and 50/50 EVA70/PVC blend

The dipole dynamics and α-relaxation behaviour of polyvinyl chloride PVC, poly(ethylene-co-vinyl-acetate) EVA₇₀ and blend of them EVA₇₀/PVC have been investigated by differential scanning calorimetry (DSC) and dielectric relaxation spectroscopy (DRS). The differential scanning calorimetry (DSC) thermograms measured on samples show a single glass transition in the analysed temperature range. These three polymers are wholly amorphous and pure PVC and pure EVA₇₀ are miscible in the ratio 1:1. The glass transition temperature T_g decreases significantly with presence of EVA₇₀. Furthermore, the values of apparent activation energies for molecular motions at the α-relaxation and the values of fragility index have also been determined for each sample using Moynihan expression for DSC results and Vogel-Fulcher-Tammann-Hesse (VFTH) form for DRS results. It is shown a large dependence of all the values of these parameters with the content of EVA₇₀. Comparing these three polymers, we found that the more fragile glass forming liquid is the PVC. Fragility decreases drastically with EVA₇₀ content. EVA₇₀ and EVA₇₀/PVC blend exhibit practically the same behaviour. The effect of inter- and intra-molecular interactions on fragility is discussed to explain these variations.     

The hydrolysis mechanism of bis(2,4-di-tert-butyl)pentaerythritol diphosphite (Alkanox P24): An atmospheric pressure photoionisation mass spectrometric study

Alkanox P24 is a commercial phosphite antioxidant, well known in the literature for its excellent processing stability. As in the case of many processing phosphites, however, Alkanox P24 might undergo hydrolysis when exposed to small amounts of water. A number of products proposed recently in the hydrolytic pathway of the phosphite [Ortuoste N, Allen NS, Papanastasiou M, McMahon A, Edge M, Johnson B, et al. Polym Degrad Stab; 2006;91:195-211] are investigated in this study by atmospheric pressure ionisation-mass spectrometry (API-MS). The applicability of atmospheric pressure photoionisation (APPI) and atmospheric pressure chemical ionisation (APCI) ion sources is tested and the ion formation characteristics of Alkanox P24 are compared in both sources. In positive ion mode, ionisation of the parent phosphite occurred by protonation. In negative ion mode no pseudo-molecular ion peak was detected and the deprotonated species were more dominant in APPI. This source was employed further for the investigation of the hydrolysis products, since it exhibited lower limits of detection. High performance liquid chromatography (HPLC) with single ion monitoring (SIM) detection was used for the separation of the species formed. Hydrolysis of the phosphite proceeded via the scission of the two P-O_phenol bonds exclusively to give 2,4-di-tert-butyl phenol quantitatively as a final product.     

Selective transport of cesium ion in polymeric CTA membrane containing calixcrown ethers

A series of calixcrown ethers for which the cavity size of the crown ring is varied from crown-6 to crown-7 to crown-8 were examined for the transport abilities toward alkali metal ions. These ligands were incorporated into supported liquid membranes (SLMs) and into polymer inclusion membranes (PIMs) composed of cellulose triacetate (CTA) as a support and 2-nitrophenyl octyl ether (NPOE) and tris(2-butoxyethyl) phosphate (TBEP) as a plasticizer. In both membrane systems, calixcrown-6 showed the best selectivity toward a cesium ion over other alkali metal ions. The polymeric CTA membrane showed more rapid transport rate as well as higher durability than did the SLMs.     

Hydrogels in aqueous phases of polyvinylalcohol (PVA), surfactants and clay minerals

Aqueous solutions of synthetic clay minerals have been studied in the presence of surfactants and water-soluble polyvinylalcohol (PVA). The PVAs (PVA 1, PVA 2) had a molecular weight of about 10⁵ Dalton and a degree of hydrolysis of 82%. The PVA-samples were surface active and lowered the surface tension to 43 mN/m. As a consequence of their amphiphilic nature the PVA molecules bind strongly to clay mineral particles. On saturation the clay mineral particles adsorb the fivefold weight of PVA of their own weight. It is concluded that the thickness of the adsorbed layers on both sides of the clay mineral is in the range of the hydrodynamic diameter of the PVA-coils in the bulk phase.When the clay mineral particles are not saturated with PVA, they act as cross-linking agents for the PVA. The whole systems are physically cross-linked and assume gel-like properties. Rheological measurements show that samples behave like soft matter with a yield stress value. All of them have a frequency independent storage modulus which is an order of magnitude larger than the loss modulus. The hydrogels become stronger as PVA concentration increases.Small amounts of cationic surfactants bind on the clay mineral. The interface of the clay mineral becomes more hydrophobic and the binding of the PVA on the clay mineral is strengthened. With rising concentration of the surfactant the surfactant molecules bind on PVA and the PVA becomes hydrophilic. As a consequence the PVA can no longer bind on the clay mineral and the gels transform to viscous and turbid solutions. Small amounts of cationic surfactants therefore stiffen the hydrogels while larger amounts cause phase separation and a solution with low viscosity. Anionic surfactants like SDS do not bind on the clay mineral, but strongly on the PVA. With increasing SDS concentration, the hydrogels become stiffer at first but thereafter they break and transform to viscous fluids.In PVA-solutions without the clay minerals both cationic and anionic surfactants bind to the PVAs in the aqueous solution. With increasing concentration of surfactant, the viscosities of the solutions pass over a maximum. In this respect the PVAs behave like hydrophobically modified water soluble polymers. The surfactants bind to the hydrophobic microdomain and thereby crosslink the polymer molecules. On saturation the polyvinyl alcohol with anionic surfactant become hydrophilic and the network character disappears to a certain extent.     

CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

聚酰亚胺／聚N－乙烯吡咯烷酮分子复合物的合成和表征

由原位缩聚制备了刚性高分子聚酰亚胺（ＰＩ）和柔性基体聚Ｎ－乙烯吡咯烷附（ＰＶＰ）的分子复合物，并由实验证明了中间体聚酰胺酸（ＰＡ）和聚乙烯吡咯烷酮大分子之间存在的酸一碱相互作用．这种相互作用促进了混容性，使聚酰亚胺能以分子水平或接近分子水平分散在聚毗咯烷酮的基体之中．聚酰亚胺／聚Ｎ－乙烯吡咯烷团分子复合物的薄膜呈透明性，在整个组成范围内只有一个Ｔｇ，显示单相行为。当ＰＩ含量＜２０％时，ＳＥＭ相片呈现均相形貌，看不到ＰＩ微晶．广角Ｘ－ｒａｙ衍射图表明ＰＩ特征结晶峰消失，和无定形的ＰＶＰ完全混容．当ＰＩ含量＞４０％，ＳＥＭ显示有均匀分布的、棒状ＰＩ微晶存在．通过分子复合，即使ＰＩ含量为１０％，聚Ｎ－乙烯吡咯烷酮不再溶于乙醇，耐热性也有提高．