Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.     

A tunable dual frequency Tm:YAG laser

A compact design for a single mode Tm:YAG laser is presented. With two thin infrasil etalons as the only intracavity tuning elements a tuning range from 1940 to 2030 nm with a gap between 2000 and 2020 nm can be realized. The laser emits in two longitudinal modes separated by 1 GHz. Pumped with 500 mW power from a Ti:sapphire laser at 786 nm the output is above 50 mW over the entire tuning range. Frequencies can be rapidly varied over a range of 4 GHz.     

能量色散偏振X射线荧光光谱法测定生铁中锰和钛

探讨了应用能量色散偏振X射线荧光光谱仪测定生铁中锰和钛进行炉前快速分析的方法.对测定锰及钛时仪器的工作条件,试样的制备以及工作曲线的制作等因素作了较系统的试验,该方法所得测定结果与化学法测定结果或标样标准值相吻合,相对标准偏差小于1.5%,与化学法相比,锰和钛的测定时间由50 min缩短到2 min.     

Neutron depolarisation imaging: Stress measurements by magnetostriction effects in Ni foils

In this article we present first proof-of-principle neutron depolarization imaging measurements on Ni foils under mechanical stress. The magnetostrictive effect in Ni leads to a reorientation of the magnetic domains in the material depending on the applied force. This in turn leads to a change of the depolarization a neutron beam suffers from transmission of the sample. We propose to use this method as a new technique for the spatially resolved measurement of mechanical stress.     

A magnetised foil as inclined π-flipper for time-of-flight neutron beams

A prototype instrument with an inclined ferromagnetic foil was built which was capable of π-flipping over a broad wavelength range of polarised thermal neutrons in a time-of-flight beam. It was found that, for a single foil, polarised neutrons could be flipped in a wavelength range of 0.2-0.5 nm with an efficiency of 93%. With improved mechanical setup this range probably can even be extended to 0.1-1.0 nm. Foil flippers can have some major advantages for polychromatic SESANS over resonance flippers, but the technical realisation with four foils in series will be challenging.     

Offspec, the ISIS spin-echo reflectometer

OffSpec has been purposely built as a low background, polarised neutron reflectometer with spin-echo for Larmor labeling. The instrument received first neutrons in December 2008 and five of the intended seven modes of operation have now been tested and operated with peer reviewed user experiments. The technical performance of the instrument will be reviewed in each of the modes and future scientific possibilities discussed. Particular attention will be paid to results from spin-echo SANS (SESANS) and spin-echo resolved grazing incidence scattering (SERGIS), where the largest number of measurements have been performed.     

Measurement of the neutron beam polarization of BL05/NOP beamline at J-PARC

We measured the neutron beam polarization of the BL05/NOP (Neutron Optics and Physics) beamline at J-PARC with an accuracy of less than 10⁻³ using polarized ³He gas as a neutron spin analyzer. Precise polarimetry of the neutron beam is necessary to understand the beamline optics as well as for the asymmetry measurements of the neutron beta decay, which are planned in this beamline.     

Development and test of SEOP neutron spin filter in Japan

We have begun the development of an in-situ spin-exchange optical pumping (SEOP) system aiming to use it as a neutron spin filter for incident beam polarization at the Japan Proton Accelerator Research Complex (J-PARC). To use it, it is recommended that the optics be adjusted easily, have high stability, and have a small size. In this paper we improved our previous SEOP system aiming to use it in J-PARC and performed a neutron beam test at the JRR-3 NOP beamline to see the performance of the neutron spin filter (NSF). The polarization of the ³He gas reached 73%. This paper gives the present status of the development of in-situ SEOP system in J-PARC.     

Magnetic layered structure for the production of polarized neutron microbeams

A neutron waveguide is a three-layer structure in which a guiding layer with low optical potential is placed between two cladding layers with high optical potential. Under proper operation conditions, the neutron density is resonantly enhanced inside the guiding layer. In our experimental scheme, the neutron beam enters through the surface of the top layer at glancing angle and goes out from the edge of the guiding layer, with an angular distribution corresponding to Fraunhofer diffraction from a narrow slit. The incident neutron beam is relatively wide (0.1 mm) and highly collimated (0.01°). The outgoing sub-micron beam is extremely narrow at the outlet (0.1 μm) and more divergent (0.1°). So far only the production of unpolarized sub-micron neutron beams has been reported. Here we present first experiments on polarized sub-micron neutron beams. For these studies a polarized incident beam was used and two types of magnetic waveguides were investigated: a polarizing magnetic waveguide Fe(20 nm)/Cu(140 nm)/Fe(50 nm)//glass and a non-polarizing magnetic waveguide Py(10 nm)/Al(140 nm)/Py(50 nm)//glass (Py is permalloy). The waveguide samples were characterized by polarized neutron reflectometry.     

Specular and off-specular scattering with polarization and polarization analysis on reflectometer V6 at BER II, HZB

We report on the enhanced capabilities of neutron reflectometer V6 at the research reactor BER II at Helmholtz-Zentrum Berlin für Materialien und Energie (HZB) in investigating magnetic thin films and multilayers. It is now fully equipped for simultaneous measurements of specular and off-specular scattering with polarization and polarization analysis. The magnetization configuration of a [CoO/Co/Au]_×16 polycrystalline multilayer at room temperature is reported in demonstrating the efficiency of the instrument. The data is simulated within the supermatrix formalism under the distorted wave Born approximation for a quantitative analysis.