一种新型微结构光纤的设计与数值研究

提出了一种新型双包层结构的微结构光纤(MOF),利用有限元法对其模场面积、损耗及色散系数随波长的变化规律进行了数值模拟与分析,并在相同条件下与传统的双包层MOF作了比较。结果表明,该种光纤不但结构新颖,而且较传统光纤有更优异的色散性能。通过合理优化,设计了几种在500nm波长范围内保持低平色散和较大模场面积的新型双包层MOF。这种光纤结构的提出对以后的理论研究和工艺制备具有一定的参考意义。     

环中环结构谐振腔中的耦合谐振透明特性研究

在考虑耦合器插入损耗的情况下,理论分析了环中环结构谐振腔的耦合谐振透明效应.利用迭代法推导了整个结构的透过系数和有效相移,从而得到考虑了插入损耗的该结构的色散.研究表明,整个结构的有效相移,群速度和带宽,可通过耦合器的插入损耗、环中环结构中环与环周长之间的倍数以及环的个数来控制,这在旋转传感、光学时延线、光缓存、滤波等方面的应用有重要意义. 关键词： 环中环结构 耦合谐振透明 色散 慢光     

Microwave dielectric and magnetic properties of superparamagnetic 8-nm Fe3O4 nanoparticles

The superparamagnetic 8-nm Fe₃O₄ nanoparticles were successfully prepared by chemical oxidation process. For the complex permittivity, the dual dielectric relaxation processes have been proved by two overlapped Cole–Cole semicircles, and the natural resonance frequency is 3.03 GHz for the complex permeability. The maximum reflection loss value reaches −55.5 dB at 6.11 GHz with 3.85 mm in the thickness of the absorbers for the superparamagnetic 8-nm Fe₃O₄ nanoparticles which is better than that of 150 nm and 30 nm Fe₃O₄ nanoparticles. It is believed that the superparamagnetic 8-nm Fe₃O₄ nanoparticles can be used as a kind of candidate for microwave absorber.     

光孤子对的振幅比与相位差对传输的影响

利用分步傅里叶变换法分别求解含三阶色散效应和不考虑三阶色散情况下的光孤子非线性薛定谔（NLS）方程,通过数值求解发现三阶色散效应会使孤子对脉冲发生单边振荡,并在振荡侧逐级产生次脉冲。讨论孤子对的两束孤子脉冲之间的振幅比与相位差对传输的影响,发现在不考虑三阶色散的情况下,振幅比与相位差均对孤子对的传输有显著影响,在考虑三阶色散效应时,只有相位差对孤子对的传输产生影响,并可以导致脉冲能量转移。     

电流模式SEPIC变换器倍周期分岔现象研究

以SEPIC变换器中前置电感电流为控制对象,建立了SEPIC变换器断续电流模式下的离散时间模型, 并分析了不动点的稳定性.通过相轨图、功率谱图以及分岔图, 发现电路中存在一种特殊的倍周期分岔现象——电路的运行状态经历了1倍周期、 2倍周期、4倍周期再到2倍周期、4倍周期,最终进入混沌状态.实验结果与仿真结果相一致, 证实了SEPIC变换器在断续电流模式下存在这种倍周期分岔现象.     

由单负材料组成的一维对称型光子晶体中的隧穿模

由电单负材料A和磁单负材料B构成了一维对称型光子晶体,数值计算表明其带隙中出现了一隧穿模. 材料层数增加,隧穿模宽度急剧变窄,而其位置不变.隧穿模的位置和宽度对入射角的变化都不太敏感. 材料的几何厚度减小,隧穿模的位置蓝移,而其宽度不变. μ_A, ε_B增加,隧穿模的位置红移,宽度减小. 利用隧穿模的以上特性可以实现对电磁波传播的动态调控.     

基质折射率对反常色散散射体散射特性的影响

基于Mie散射理论,给出了散射强度、散射截面及吸收截面的计算公式,并对不同基质中碳化硅材料在反常色散区中的散射特性进行了数值计算与理论分析。结果表明,在反常色散区中,随着基质折射率的增大,散射强度的峰位发生红移,峰值增大;散射截面和吸收截面的峰位发生红移,峰值减小,这为该材料在反常色散区中的光学理论、实验及应用方面提供了理论参考。     

Mode-I crack in a two-dimensional fibre-reinforced generalized thermoelastic problem

A general model of the equations of the Lord-Şulman theory including one relaxation time and the Green-Lindsay theory with two relaxation times, as well as the classical dynamical coupled theory, are applied to the study of the influence of reinforcement on the total deformation for an infinite space weakened by a finite linear opening mode-I crack. We study the influence of reinforcement on the total deformation of rotating thermoelastic half-space and their interaction with each other. The material is homogeneous isotropic elastic half space. The crack is subjected to prescribed temperature and stress distributions. The normal mode analysis is used to obtain the exact expressions for displacement components, force stresses, and temperature. The variations of the considered variables with the horizontal distance are illustrated graphically. Comparisons are made with the results obtained in the three theories with and without rotation. A comparison is also made between the two theories for different depths.     

SOP and PMD monitoring on deployed aerial optical fibres

State of polarization (SOP) and polarization mode dispersion (PMD) are stochastic in nature due to changes in the properties of the optical fibres and its positions because of both intrinsic and extrinsic perturbations. With 184 PMD values obtained by use of the FTB-5700 single-ended dispersion analyzer, the predicted theoretical Gaussian fit was obtained with a mean of 0.47 ps and standard deviation of 0.08 ps. This small standard deviation was justification for its accuracy in measuring PMD of aerial optical fibres. A comparison is also made on the accuracy of the GINTY and the FTB-5700 on measurement of PMD of aerial optical fibres with results showing that the latter is more accurate compared to the former. The time scale over which to compensate PMD in aerial optical fibres was determined and it is slightly higher than 400 s; the decorrelation time obtained for SOPs on a particular windy and hot day. This is because the changes of the PMD vector are known to be slower than SOP changes.     

0.4 THz回旋行波管的设计与模拟

利用三维粒子模拟仿真软件,对共焦波导结构的0.4 THz回旋行波管进行了注波互作用的模拟研究。以共焦波导的冷腔色散以及衍射损耗入手,最终选定HE06模作为互作用工作模式。为了对寄生振荡进行抑制,在互作用结构中引入了截断。在模拟过程中,通过调节束压、束流、工作磁场、电子束横纵速度比,得到了最优的工作参数。最终,在束压34 kV、磁场14.25、束流2 A、横纵速度比0.75的工作参数下,当输入信号为1 W时,得到了最高2.76 kW的功率输出,增益超过34 dB,3 dB带宽为8 GHz,效率达到4%。