Novel Properties of Photochromic Spirooxazine Nanoparticles

The nanoparticles of a spirooxazine （SPO） and its photomerocyanine （PMC） were prepared through the reprecipitation method. Two distinct features were observed. One is that the decaying lifetime for PMC nanoparticles was 600 times of that for the dispersed molecules, and the other is that the fluorescence intensity of SPO nanoparticles was enhanced by 240 times of that of the dispersed monomer.     

担载型铂催化剂上甲烷活化的TPSR研究

用程序升温表面反应手段，系统地考察了甲烷在Ｐｔ催化剂上的吸附活化特征及甲烷分解后产生的表面碳物种。结果表明，ＣＨ４确能在ＳｉＯ２担载型Ｐｔ催化剂表面发生解离吸附，生成复杂的碳物种。这些碳物种间可发生相互转化。     

Catalytic Para‐Xylene Maximization. V. Toluene Methylation with Methanol and Disproportionation of Toluene Using Pt/ZSM‐5 and Pt/Mordenite Catalysts

Toluene was methylated with methanol and disproportionated using catalysts containing different Pt contents (0.2, 0.4 and 0.6%) supported on H‐ZSM‐5 or H‐mordenite (H‐M) zeolites in a fixed‐bed flow‐reactor operated atmospherically at temperatures of 300–500 °C in a flow of hydrogen. Platinum dispersion in the zeolite supports and acid sites strength distribution were evaluated using hydrogen chemisorption (1:1 stoichiometry) and ammonia temperature programmed desorption (TPD) in a differential scanning calorimeter (DSC). Toluene methylation was much faster on all catalysts than toluene disproportionation (DISP). Both reactions were more accelerated using H‐ZSM‐5 containing catalysts than H‐M containing catalysts. The yield of xylenes, and in particular para‐xylene, was significantly influenced by the yield of trimethylbenzenes (TMBs) in product. The selectivities for para‐, ortho‐ and meta‐xylenes production were found largely dependent on the Pt content in the catalysts, particularly when supported on H‐ZSM5‐zeolite. However, using Pt/H‐M catalysts, these selectivities were not strictly controlled by Pt content in the catalysts.     

纳米Sb2O3的制备与性能研究

由于Sb2O3是一种性能优良的无机阻燃剂,并与卤素阻燃剂有很好的协效作用[1],1998年,全球用于阻燃的Sb2O3达80kt以上,占阻燃剂总耗量的7%[2]。但由于其本身的极性特点,加入到纤维、塑料等高分子材料中,材料的力学性能受到很大损失[3],因此对传统的微米级的Sb2O3进行超细、表面处     

流动注入吸附溶出—催化极谱氢波分析痕量铂

本文叙述一种流动注入吸附溶出一催化极谱测定痕量铂的新技术,它集中了溶出法、催化波和流动注入的优点,达到非常高的灵敏度和分析速度。实验给出了最佳载液组成、流速、注入体积、吸附富集电位和吸附时间等因素。本方法成功地进行了多种铂络合物、矿样和生物样品分析。     

反相微乳液法制备纳米Al2O3颗粒及其形成反应机理的研究

通过聚乙二醇辛基苯基醚(曲拉通X-100)/正丁醇/环己烷/水溶液形成的体系, 采用反相微乳液法合成了Al₂O₃纳米粒子. 对前驱体进行热分析(TG-DTG-DTA), 确定了合适的煅烧温度为1150 ℃. 采用X射线衍射(XRD)、透射电镜(TEM)、紫外可见分光光度法(UV-vis)分别对产物的结构、粒度和形貌进行了表征, 考察了微乳液中水与表面活性剂的物质的量之比(ω_o)、煅烧温度和煅烧时升温速率等关键因素对产物形貌和晶相的影响, 并通过分析进一步揭示了Al₂O₃纳米粒子的形成机理. 结果表明, 控制ω_o为10、煅烧温度为1150 ℃可得到分散性好、粒径分布均匀的Al₂O₃纳米粒子, 且2 ℃/min的升温速率更有利于产物向稳定的α晶相转变.     

熔融萃取法富集痕量铂和铑─石墨炉原子吸收光谱测定

本文报道以２－硫基苯并噻唑（ＭＢＴ）为络合剂，用熔融萘萃取痕量的铂和铑，继用石墨炉原子吸收光谱法直接测定之。文中曾对一些有关参数作了试验，并找出各参数的最优值，对共存离子的允许量也作了试验。最后用国家标样和部级管理样核对本法，结果令人满意。     

碳铂类似物的合成,表征及对大鼠W—256肉瘤的抑制作用

合成了十八种〔PtA_2X〕·yH_2O,其中A分别为NH_3、CH_3NH_2、1/2乙二胺和1/2(2,3-二甲基-2,3-丁二胺),X分别为1,1-环丙烷二羧酸根(CPrDCA)、2-甲-1,1-环丙烷二羧酸根(2-M-CPrDCA)、2-甲-1,1-环丁烷二羧酸根(2-M-CBDCA)、1,2-环戊烷二羧酸根(CPDCA)和1,1-环已烷二羧酸根(CHDCA),并进行了表征。测定了配合物抑制大鼠W-256肉瘤的活性,发现配合物〔Pt(NH_3)_2X〕系列按X不同有以下的活性次序:CPrDCA>2-M-CPrDCA>CPDCA>CBDCA(碳铂)≥2-M-CBDCA。     

Platinum carbonyl derived catalysts on inorganic and organic supports: a comparative study

Fumed silica, silica gel, silica-alumina and cross-linked (5.5%) polystyrene have been functionalized with quaternary ammonium groups and the Chini cluster [Pt₁₂(CO)₂₄]²⁻ has been anchored onto these functionalized materials by ion pairing. A catalyst has also been prepared by the adsorption of Na₂[Pt₁₂(CO)₂₄] on unfunctionalized fumed silica. The catalytic activities of the resultant materials, and that of commercially purchased 5% platinum on alumina have been studied for the hydrogenation of a variety of unsaturated compounds. The substrates studied are: α-acetamidocinnamic acid, cyclohexanone, acetophenone, methyl pyruvate, ethyl acetoacetate, nitrobenzene and benzonitrile. Compared to the polystyrene supported catalyst, the inorganic oxide supported catalysts have higher surface areas and for most of the substrates have notably higher activities. The functionalized fumed silica-based catalyst gives higher conversions than functionalized silica gel and silica-alumina-based catalysts. In the hydrogenation of acetophenone and ethyl acetoacetate, the functionalized fumed silica-based catalyst show superior activity compared to the commercial platinum catalyst, and the catalyst made by conventional adsorption method. In benzonitrile hydrogenation with all the cluster-derived catalysts a hydrazine derivative is selectively formed, but when the commercial platinum catalyst is used benzyl amine is the main product.