Vibrational Spectrum of a Platinum Complex of Piroxicam

The infrared and Raman spectra of a platinum complex of the antiinflammatory drug piroxicam (Pir) and dimethylsulfoxide (DMSO) of composition [PtCl₂Pir(DMSO)] were recorded and briefly discussed on the basis of its structural characteristics. The metal-to-ligand vibrations are analyzed in detail.     

Pd-Pt loaded graphene aerogel on nickel foam composite as binder-free anode for a direct glucose fuel cell unit

Fabrication of electrocatalyst for direct glucose fuel cell (DGFC) operation involves destructive preparation methods with the use of stabilizer like binder, which may cause activity depreciation. Binder-free electrocatalytic electrode becomes a possible solution to the above problem. Binder-free bimetallic Pd-Pt loaded graphene aerogel on nickel foam plates with different Pd/Pt ratios (1:2.32, 1:1.62, and 1:0.98) are successfully fabricated through a green one-step mild reduction process producing a Pd-Pt/GO/nickel form plate (NFP) composite. Anode with the binder-free electrocatalysts exhibit a strong activity in a batch type DGFC unit under room temperature. The effects of glucose and KOH concentrations, and the Pd/Pt ratios of the electrocatalyst on the DGFC performance are also studied. Maximum power density output of 1.25 mW cm⁻² is recorded with 0.5 M glucose/3 M KOH as the anodic fuel, and Pd₁Pt_0.98/GA/NFP as catalyst, which is the highest obtained so far among other types of electrocatalyst.     

Immobilization of [Pt2(μ-S)2(PPh3)4] on Polymeric Supports by Sulfide Alkylation and Phosphine Exchange Reactions

Abstract

The immobilization of the dinuclear platinum(II) sulfido complex [Pt₂(μ-S)₂ (PPh₃)₄] on solid supports has been investigated. Reaction with haloalkyl functionalized polymers [Merrifield's resin (chloromethylated polystyrene), chloropropyl silica, chloropropyl controlled pore glass, and bromopropyl polysiloxane] gives complexes immobilized through alkylation of one of the sulfide ligands, forming a μ-thiolate ligand acting as an anchor to the polymer support, akin to well-established reactions of [Pt₂(μ-S)₂(PPh₃)₄] with molecular alkylating agents. The model complex [Pt₂(μ-S)(μ-SCH₂SiMe₃)(PPh₃)₄]PF₆ was prepared as the first molecular silicon-containing derivative of [Pt₂(μ-S)₂(PPh₃)₄] and was fully characterized by NMR spectroscopy, electrospray ionization-mass spectrometry, and single-crystal X-ray diffraction. Immobilization of [Pt₂(μ-S)₂(PPh₃)₄] by phosphine exchange reactions was also achieved using commercial polystyrene-grafted triphenylphosphine or a new immobilized phosphine [derived by sequential functionalization of Merrifield's resin with a polyether amine and then Ph₂PCH₂OH].     

Binding of Ionic Pyrene Derivatives to Polyelectrolytes. A Uv Absorption and Fluorescence Study

Abstract

The binding of pyrenesulfonic acid and pyrenebutyric acid to poly(vinyl benzyl trimethylammonium) chloride was investigated by UV and fluorescence spectroscopy. It was found that the binding constant was 7.5 × 10⁴ and 3.5 × 10⁴M^?1, respectively. The addition of the polyelectrolyte quenches the fluorescence of the pyrene group, and at the same time the typical excimer emission appears. This emission originates in pre-formed ground state aggregates of the pyrene derivatives incorporated into the polyion domain. Similar effects were observed when anionic polyelectrolytes, poly(styrene sulfonic), and poly(vinyl sulfonic) acids were added to cationic pyrene derivatives. The binding constants depend on the length of the aliphatic sidechain of the derivatives.     

淀粉功能化Fe_3O_4纳米簇球的制备与表征

以淀粉为表面活性剂,利用乙二醇溶剂热法一步制备了Fe3O4纳米簇球.采用X射线衍射仪、傅立叶变换红外光谱仪、扫描电镜等分析了产物的结构;采用热重分析仪测定了其热稳定性.结果表明:所得产物为直径约为230nm的簇球结构,构成簇球的纳米粒子直径约为10nm;引入淀粉成功地改善了产物的纳米结构和表面性能.合成的Fe3O4纳米簇球具有独特的结构和表面性能,在生物领域具有潜在的应用前景.     

Preparation and Characterization of Cyclohexyl Moiety Toughened POSS-Reinforced Epoxy Nanocomposites

Polyhedral oligomeric silsesquioxane (POSS)-reinforced epoxy nanocomposites were prepared by reacting commercially available diglycidyl ether of bisphenol-A (DGEBA) and tetraglycidyl diamino diphenyl methane (TGDDM) epoxy resins with 1,1-bis(3-methyl-4-glycidyloxyphenyl)cyclohexane (Cy-Ep) separately and reinforced with POSS nanocluster. POSS (OAPS)-reinforced hybrid Cy-Ep-epoxy resin castings were characterized for their mechanical and morphological properties. The data obtained from mechanical studies indicated that the incorporation of nano OAPS into Cy-Ep modified hybrid systems results in improved stability. Among the epoxy systems studied, the TGDDM-based hybrid epoxy system exhibited higher values of tensile and flexural properties than that of the DGEBA hybrid epoxy system, whereas the impact strength of the DGEBA system was higher than that of the TGDDM system. The dispersion of POSS was confirmed by scanning electron microscopy and visual observation studies.     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Application of hot platinum microelectrodes for determination of flavonoids in flow injection analysis and capillary electrophoresis

The determination of quercetin and rutin by flow injection analysis (FIA) and capillary electrophoresis (CE) using electrochemical detection was described. These flavonoids were determined at normal (unheated) and hot platinum microelectrodes using cyclic voltammetry. When quercetin or rutin is reaching the platinum electrode, a change of the current in the region of the platinum oxide formation is observed. Integration of the current changes in this in this region creates analytical signals in the form of peaks. An increase of temperature to about 76 ?C in a small zone adjacent to the microelectrode causes an increase of the analytical signal by more than 6 times under FIA conditions. This method enables the use of hot microelectrodes as detectors in HPLC or CE. In CE the improvement of the analytical signal at hot microelectrodes is smaller than in FIA and increase only 1.3–3.4 times. Heated microelectrodes were used for analysis of the flavonoids in natural samples of the plant (extract of sea buckthorn) and a pharmaceutical preparation (Cerutin).     

Glucose oxidase-functionalized fluorescent gold nanoclusters as probes for glucose

Creation and application of noble metal nanoclusters have received continuous attention. By integrating enzyme activity and fluorescence for potential applications, enzyme-capped metal clusters are more desirable. This work demonstrated a glucose oxidase (an enzyme for glucose)-functionalized gold cluster as probe for glucose. Under physiological conditions, such bioconjugate was successfully prepared by an etching reaction, where tetrakis (hydroxylmethyl) phosphonium-protected gold nanoparticle and thioctic acid-modified glucose oxidase were used as precursor and etchant, respectively. These bioconjugates showed unique fluorescence spectra (λ_{em max} = 650 nm, λ_{ex max} = 507 nm) with an acceptable quantum yield (ca. 7%). Moreover, the conjugated glucose oxidase remained active and catalyzed reaction of glucose and dissolved O₂ to produce H₂O₂, which quenched quantitatively the fluorescence of gold clusters and laid a foundation of glucose detection. A linear range of 2.0 × 10⁻⁶–140 × 10⁻⁶ M and a detection limit of 0.7 × 10⁻⁶ M (S/N = 3) were obtained. Also, another horseradish peroxidase/gold cluster bioconjugate was produced by such general synthesis method. Such enzyme/metal cluster bioconjugates represented a promising class of biosensors for biologically important targets in organelles or cells.     

制备方法对Al2O3掺杂Pt/WO3-ZrO2催化剂上正庚烷异构化反应的影响

采用恒pH法和非恒pH法制备了Al₂O₃掺杂的Pt/WO₃/ZrO₂催化剂,并用N₂吸附-脱附、X射线衍射、紫外-可见漫反射、CO化学吸附、X射线光电子能谱、²⁷Al魔角旋转核磁共振和吡啶吸附红外等技术对催化剂进行了表征.结果表明,相比于非恒pH法制备的催化剂,恒pH法制备的催化剂具有较高的比表面积和Pt分散度,在H₂气氛中产生更多的B酸位,从而表现出更高的催化正庚烷临氢异构化反应活性; 在200℃和质量空速0.9h^-1的反应条件下,正庚烷转化率达70.0%,明显高于非恒pH法制备的催化剂(43.5%).