辉光放电聚合物结构及力学性质研究

采用低压等离子体聚合技术,通过调整工作气压和反式二丁烯(T₂B)与H₂流量比制备了辉光放电聚合物(GDP)涂层. 利用傅里叶变换红外吸收光谱和元素分析法讨论了工作气压和T₂B与H₂流量比对GDP涂层内部H原子含量及结构的影响,并且通过纳米压痕技术对GDP涂层的硬度及杨氏模量进行了表征.研究结果表明:降低工作气压和T₂B与H₂流量比,GDP涂层内sp³ C 关键词： 傅里叶变换红外光谱 纳米压痕 杨氏模量 硬度     

可用于激光核聚变的闪烁中子探测器

在当前激光核聚变实验中,中子集中在短时间内出现、且产额低。为适应这种特点,要求探测器的效率高,分辨时间短。利用闪烁中子探测器探测激光核聚变所产生的中子,能测定中子产额,记录中子能量,而且探测效率高,分辨时间短。缺点是易受γ射线、X射线的干扰。     

Pressure‐induced incompressibility and point singularity of mechanical properties of TaC in NiAs‐type structure

The structural and elastic properties of TaC in NiAs‐type structure under high pressure have been investigated using first principles calculations based on density functional theory. Results indicate that the incompressibility along the c‐axis of TaC exceeds that of diamond under higher pressure. Particularly, an interesting point singularity exists in its mechanical properties as the pressure increases from 20 GPa to 40 GPa. The minimal shear modulus, Young's modulus, Debye temperature, and maximum Poisson ratio of TaC are simultaneously obtained at 28 GPa. The calculations of hardness indicate that the NiAs‐type TaC crystal possesses excellent mechanical properties. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

X-ray irradiation-induced structural modifications in PM-355 polymeric nuclear track detector film

Samples from sheets of the polymeric material PM-355 have been exposed to X-rays from a 50 kV X-ray tube in the dose range of 10–300 kGy. The resultant effect of X-ray irradiation on the structural properties of PM-355 has been investigated using different techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Vickers hardness and refractive index measurements. The results indicate that the X-ray irradiation of PM-355 in the dose range of 10–20 kGy causes initially chain scission. Above 20 and up to 100 kGy, the active free radicals produced from scission contribute to chemical reactions that lead to the crosslinking. Thus, the X-ray irradiation in the dose range of 20–100 kGy leads to a more compact structure of the PM-355 polymer, resulting in an enhancement of its Vickers hardness and refractive index. Moreover, the irradiation in the dose range of 100–300 kGy leads to the predominance of the degradation. This degradation is reported by FTIR spectroscopy and enhances the degree of ordering in the degraded samples as revealed by XRD technique. Additionally, it decreases both the Vickers hardness and refractive index of the PM-355 samples.     

Enhancement in age hardenability of sintered Ti–5Fe alloy by Zr addition processed by pulsed electric current sintering

The age-hardenable Ti–5Fe–5Zr (wt. %, 5Zr) alloy has been consolidated by pulsed electric current sintering, following a β solution treatment, and the results are compared with a Ti–5Fe (0Zr) alloy. The precipitation sequence measured at 640°C ageing is β?+?athermal ω?→?β?+?isothermal ω?→?β?+?α. At the peak hardness isothermal ω phase forms at 20?s of ageing. The Zr addition retards the precipitation kinetics of the α phase; as a result, the α phase nucleates at latest at 300?s ageing in the overaged state. Fe is partitioned into β, while it is depleted from the α phases. There is Zr enrichment near the α/β interface when the α phase precipitates due to a solute drag effect; the growth rate of the α phase in the 5Zr alloy is significantly reduced compared with that in the 0Zr alloy.     

太赫兹聚合物光子晶体光纤关键制备工艺研究

针对太赫兹聚合物光子晶体光纤的应用需求,对聚合物光纤的制备材料、预制棒制备、拉伸工艺等关键制备工艺进行了研究.分析了聚合物材料的特性,并进行实验验证,结果表明ZEONEX材料的吸收系数低于3cm~(-1),吸水性低于0.01%,玻璃化转变温度和分解温度分别高达136℃和420℃,在太赫兹光纤制备中具有优良性能.预制棒制备和光纤拉伸的工艺方面,在注塑法的基础上改进了模具系统,使用可控的微压拉丝技术,在10200Pa范围内可实现±1.5Pa的微压差精确控制,较大程度上提高了光纤预制棒的成品率和光纤的形变控制,有望制备出高空气填充率的聚合物光子晶体光纤.     

Deposition of carbon nitride films for space application

Carbon nitride thin films were prepared by electron-beam evaporation assisted with nitrogen ion bombardment and TiN/CN_x composite films were by unbalanced dc magnetron sputtering, respectively. It was found that the sputtered films were better than the evaporated films in hardness and adhesion. The experiments of atomic oxygen action, cold welding, friction and wearing were emphasized, and the results proved that the sputtered TiN/CN_x composite films were suitable for space application.     

环境光对PE塑料薄膜近红外激光拉曼光谱的影响

探讨了环境光自然光和室内荧光灯光的存在,对PE透明塑料薄膜的近红外激光拉曼光谱的影响.研究表明不同的环境光,会对近红外拉曼光谱产生不同的明显特征峰.自然光干扰产生的是以倒峰群形式为主,而室内荧光灯光造成的干扰主要以尖锐的脉冲峰形式.虽干扰表现形式不同,但都有严重地影响,在测定时一定要引起重视,不能忽略.建议在进行透明塑料近红外拉曼光谱检测时,须在暗室或暗罩遮光保护中进行,以完全隔离环境光的影响.     

塑料光学元件的清洗、镀膜和胶合

各种塑料光学元件在光学系统中的应用越来越广泛。作为光学元件,必然涉及清洗、镀膜和胶合等工艺技术问题。本文就塑料光学元件的这三个技术作一介绍。