D. CCD视频技术、等离子体诊断和脉冲辐射摄影

本文对CCD摄象技术、等离子体诊断和脉冲辐射摄影的国内外最新发展作了评述,并涉及到在高技术领域的应用。     

托卡马克工程试验混合堆等离子体性能的等值线图分析

本文简要叙述托卡马克工程试验混合堆等离子体概念设计的物理基础,对等离子体性能进行了等值线图(Plasma Operation Contour)分析。根据工程试验混合堆的要求,得出一组等离子体参数。     

Surface morphology changes of poly(ethyleneterephthalate) fabrics induced by cold plasma treatments

Some selective cold plasma processing modify specific surface properties of textile polymeric materials such as their dyeability, wettability and hydrorepellence. To correlate the sample surface changes with the acquired surface properties allows one to obtain information on the chemical and physical processing involved in plasma treatment. In this work, atomic force microscopy (AFM) has been applied to investigate the morphological and topographical surface modifications induced by RF cold plasma processing of poly(ethyleneterephthalate) (PET) fabrics. Rms surface roughness and surface area of the samples are measured before and after the treatments. The morphology changes have been analysed as a function of the treatment time and air gas pressure. Measurements have been performed also using plasmas produced by different gases such as He, Ar, SF₆ and CF₄. The PET shows different behaviour with different gas plasmas. In the case of air, He and Ar gases the sample surface modifications seem to be mainly due to etching effects, while the fluorine atoms grafting probably is responsible for surface rearrangement process using SF₆ and CF₄ gases. As a consequence different surface properties are produced in the plasma treated samples. Article presented at the International Conference on the Frontiers of Plasma Physics and Technology, 9–14 December 2002, Bangalore, India.     

Detailed investigation of ignition by hot gas jets

Experimental and numerical investigations of the ignition of hydrogen/air mixtures by jets of hot exhaust gases are reported. An experimental realisation of such an ignition process, where a jet of hot exhaust gas impinges through a narrow nozzle into a quiescent hydrogen/air mixture, possibly initiating ignition and combustion, is studied. High-speed laser-induced fluorescence (LIF) image sequences of the hydroxyl radical (OH) and laser Schlieren methods are used to gain information about the spatial and temporal evolution of the ignition process. Recording temporally resolved pressure traces yields information about ambient conditions for the process. Numerical experiments are performed that allow linking these observables to certain characteristic states of the gas mixture. The outcome of numerical modelling and experiments indicates the important influence of the hot jet temperature and speed of mixing between the hot and cold gases on the ignition process. The results show the quenching of the flame inside the nozzle and the subsequent ignition of the mixture by the hot exhaust jet. These detailed examinations of the ignition process improve the knowledge concerning flame transmission out of electrical equipment of the type of protection flameproof enclosure.     

自适应控制在HL-2A等离子体电流控制中的应用

研究了一种新型的坚实可靠的自适应控制算法在HL-2A装置等离子体电流控制中的应用,并使用MATLAB进行了计算机仿真。结果表明,该控制方法与典型的PID控制相比,能显著地提高系统的动态响应性能。且具有较好的抗干扰性。     

HL-2A装置等离子体可见光成像系统

在HL-2A装置上研制了等离子体可见光成像系统,用于孔栏、偏滤器位形放电的诊断。该成像系统由彩色摄像机、观察窗和转向镜、广角收集和准直透镜组、采集卡和计算机组成。本文描述了系统的布局和各部件参数的匹配,报道了观测到的实验结果。等离子体成像系统能监视放电的整个过程,实时显示可见光辐射图形,特别在识别孔栏与偏滤器位形放电的诊断中发挥了重要作用,成为HL-2A装置放电的重要诊断手段。     

HT-7U等离子体位移快控电源设计

针对HT-7U装置等离子体位移快控电源大电流快速响应要求,提出了一种基于电流型变流器的快控电源(FCPS)设计新方案。该方案采用交-直-交拓扑结构,即网侧采用电流型PWP整流器设计。以获得稳定的直流电流及网侧单位功率因数正弦波电流控制;负载侧则采用电流型H桥逆变器设计以实现负载电流的快速跟踪控制。移相PWM控制策略在实现多组变流器并联运行的同时,提高了变流器的等效开关频率控制,从而改善了电流波形品质。模拟系统实验论证了方案的正确性。     

感应耦合等离子体刻蚀在聚合物光波导制作中的应用

提出了利用感应耦合等离子体(ICP)刻蚀技术提高聚合物光波导器件性能的方法,介绍了ICP刻蚀技术的原理和优点。选取聚甲基丙烯酸甲酯-甲基丙烯酸环氧丙酯(P(MMA-GMA))作为波导材料,采用氧气作为刻蚀气体,研究了ICP参数变化对刻蚀效果的影响。介绍了倒脊形光波导的制备过程,采用改变单一工艺参数的方法,分析了刻蚀效果随时间、功率、压强、气体流量等参数的变化,对参数优化后刻蚀得到的凹槽和平板结构进行了表征。实验结果表明:在天线射频功率为300 W,偏置射频功率为30 W,气体压强为0.5 Pa,氧气流速为50 cm³/min的条件下,可获得侧壁陡直、底面平整的P(MMA-GMA)凹槽结构。     

叠氮化铅的等离子体电子作用机理初探

本文分析了装有不同药剂的半导体桥（Semiconductor Bridge,SCB）火工品的电流信号,结合叠氮化铅（Lead Azide,LA）的铅核反应机理,探索性地分析了等离子体中电子对药剂分解反应的影响.表明SCB等离子体中的电子可能直接参与铅核的生成反应,使Pb²⁺/Pb⁰转化变得容易,实现6.89μs的发火.     

惯性约束聚变点火靶候选靶丸特点及制备研究进展

获得能量增益实现点火是目前激光惯性约束聚变领域研究的主要方向和标志性成果. 在点火靶的设计中有多种可能的候选靶丸,包括碳氢掺杂锗、铍掺杂铜、聚酰亚胺、 碳化硼和金刚石靶丸,其中碳氢和铍靶丸是最主要的候选靶丸.文中主要总结了几种候选靶丸的优缺点及目前研制现状.在国外,碳氢靶丸是目前点火靶的首选靶丸. 与铍靶丸相比,不存在明显的微结构缺陷,制备较容易;靶丸光学透明, 适宜于燃料分层和表征;靶丸在制备上更容易达到点火靶要求. 美国的碳氢点火靶靶丸基本达到了设计要求,这些要求包括几何尺寸、壳层密度、 壳层缺陷、表面光洁度、掺杂水平和杂质含量等.我国的点火靶靶丸研究还处在起步阶段.