Improved method for loss measurements in planar waveguides

A method employing an isosceles prism and a right-angle one is developed for loss measurement in planar waveguides. During the measuring process, the isosceles prism is fixed and the right-angle prism fixed on the waveguide slides by following the waveguide. Only by adjusting the gap thickness we can realize the loss measurement in planar waveguides. The method is demonstrated with an Ag/Na ion-exchanged waveguide fabricated on BK7 glass from AgNO₃ melt diluted with NaNO₃ (mass ratio 1:9), with the condition of 4 h and . The experimental results show that the method has the advantages on convenient operation, accurate results and no required end polishing.     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.     

石英晶体多路微天平等效电路和相关实验研究

从AT切的石英晶体等效电路出发，利用电路理论推导单片石英晶体上耦合电极的相互影响，相互耦合作用用复电阻描述，然后通过实验观察复电阻的频率特性，分析其具体的形式，同时通过实验初步观察了MQCM(multi-channel quartz crystal microbalance)对石英片谐振频率的影响，以及不同电极尺寸对耦合的影响。     

Creeping flow of viscoplastic materials through a planar expansion followed by a contraction

In this work, the creeping flow of a viscoplastic fluid through a planar channel with an expansion followed by a contraction is analyzed numerically. The solution of the conservation equations of mass and momentum is obtained via the finite volume method. In order to model the non-Newtonian behavior of the fluid, it was used the generalized Newtonian fluid constitutive equation. The viscosity function was the one proposed by Souza Mendes and Dutra [Souza Mendes, P.R., Dutra, E.S.S., 2004. Viscosity function for yield-stress liquids. Appl. Rheol. 14, 296–302]. The yielded and unyielded regions are obtained for several combinations of rheological parameters. The influence of these parameters on pressure drop through the cavity is also obtained and analyzed.     

Development of the large increment method for elastic perfectly plastic analysis of plane frame structures under monotonic loading

The displacement-based finite element method dominates current practice for material nonlinear analysis of structures. However, there are several characteristics that may limit the effectiveness of this approach. In particular, for elastoplastic analysis, the displacement method relies upon a step-by-step incremental approach stemming from flow theory and also requires significant mesh refinement to resolve behavior in plastic zones. This leads to computational inefficiencies that, in turn, encourage the reconsideration of force-based approaches for elastoplastic problems.One of these force algorithms that has been recently developed is the large increment method. The main advantage of the flexibility-based large increment method (LIM) over the displacement method is that it separates the global equilibrium and compatibility equations from the local constitutive relations. Consequently, LIM can reach the solution in one large increment or in a few large steps, thus, avoiding the development of cumulative errors. This paper discusses the extension of the large increment methodology for the nonlinear analysis of plane frame structures controlled by an elastic, perfectly plastic material model. The discussion focuses on the power of LIM to handle these nonlinear problems, especially when plastic hinges form in the frame and ultimately as the structure approaches the collapse stage. Illustrative planar frame examples are presented and the results are compared with those obtained from a standard displacement method.     

波长校准用低压石英汞灯驱动电源的研制

研制波长校准用低压石英汞灯电源,用于驱动汞灯起辉并维持稳态发光。电路由EMI滤波电路、桥式整流电路、LCC半桥谐振逆变电路、控制电路和保护电路5部分组成。采用系统建模与仿真验证电路的可行性并计算电路参数理论值,利用示波器和功率表验证电源输出参数,功率输出稳定性不大于0.03 W。根据紫外可见近红外分光光度计国防最高计量标准对研制的电源驱动汞灯的工作效果进行评价。结果表明,汞灯能够输出系列特征谱线,谱线相对强度稳定性不大于5.16%;汞灯工作3 h后,灯管外壳表面温度为43℃。该驱动电源的性能参数满足JJG112–2015《低压石英汞灯波长标准器检定规程》的要求。     

An Open‐Circuit Voltage and Power Conversion Efficiency Study of Fullerene Ternary Organic Solar Cells Based on Oligomer/Oligomer and Oligomer/Polymer

Variations in the open‐circuit voltage (V _oc) of ternary organic solar cells are systematically investigated. The initial study of these devices consists of two electron‐donating oligomers, S2 (two units) and S7 (seven units), and the electron‐accepting [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) and reveals that the V _oc is continuously tunable due to the changing energy of the charge transfer state (E _ct) of the active layers. Further investigation suggests that V _oc is also continuously tunable upon change in E _ct in a ternary blend system that consists of S2 and its corresponding polymer (P11):PC₇₁BM. It is interesting to note that higher power conversion efficiencies can be obtained for both S2:S7:PC₇₁BM and S2:P11:PC₇₁BM ternary systems compared with their binary systems, which can be ascribed to an improved V _oc due to the higher E _ct and an improved fill factor due to the improved film morphology upon the incorporation of S2. These findings provide a new guideline for the future design of conjugated polymers for achieving higher performance of ternary organic solar cells.

     

Bounds on the Elastic Moduli of Completely Random Two-Dimensional Polycrystals

Explicit bounds on the elastic moduli of completely random planar polycrystals, the shape and crystalline orientations of the constituent grains of which are uncorrelated, are derived and calculated for a number of crystals of general two-dimensional anisotropy. The bounds on the elastic two-dimensional bulk modulus happen to coincide with the simple third order (in anisotropy contrast) bounds for the subclass of idealistic circular cell polycrystals. The bounds on the shear modulus are close to the much simpler bounds for circular cell polycrystals, which approximate aggregates of equiaxed grains.     

静电力平衡式微型硅加速度计方案分析

静电力平衡式微型硅加速度计是一种新型加速度计。本文对这种加速度计的３种典型方案进行了分析，导出静电力（力矩）、静电力平衡回路刚度（角刚度）及加速度测量范围的表达式。有关结果可为这种加速度计参数设计提供理论依据。     

Variation of fiber orientation in turbulent flow inside a planar contraction with different shapes

In this study, we have investigated the influence of shape of planar contractions on the orientation distribution of stiff fibers suspended in turbulent flow. To do this, we have employed a model for the orientational diffusion coefficient based on the data obtained by high-speed imaging of suspension flow at the centerline of a contraction with flat walls. This orientational diffusion coefficient depends only on the contraction ratio and turbulence intensity. Our measurements show that the turbulence intensity decays exponentially independent of the contraction angle. This implies that the turbulence variation in the contraction is independent of the shape, consistent with the results by the rapid distortion theory and the experimental results of axisymmetric contractions. In order to determine the orientation anisotropy, we have solved a Fokker–Planck type equation governing the orientation distribution of fibers in turbulent flow. Although the turbulence variation and the orientational diffusion are independent of the contraction shape, the results show that the variation of the orientation anisotropy is dependent on shape. This can be explained by the variation of the rotational Péclet number, Pe_r, inside the contractions. This quantity is a measure of the importance of the mean rate of the strain relative to the orientational diffusion. We have shown that when Pe_r < 10 turbulence can significantly influence the evolution of the orientation anisotropy. Since in contractions with identical inlet conditions the streamwise position where Pe_r = 10 depends on the shape, the orientation anisotropy is dependent on the variation of rate of strain in a given contraction. We demonstrate the shape effect by considering contraction with flat walls as well as three contractions with different mean rate of strain variation.