Atomic force microscopic studies of novel arborescent block and linear triblock polystyrene-polyisobutylene copolymers

This paper reports the investigation of the nanostructured surface morphology of novel arborescent polyisobutylene-block-polystyrene (PIB-PS) copolymers, in comparison with linear PS-PIB-PS triblock copolymers, using atomic force microscopy (AFM) in tapping mode. Arborescent PIB-PS samples displayed interesting new phase morphologies, which changed dramatically upon annealing but remained irregular. Linear PS-PIB-PS samples showed morphologies similar to those previously found by transmission electron microscopy (TEM) in cryomicrotomed bulk samples, ranging from spherical/cylindrical to lamellar nanometer-sized discreet PS phases dispersed in a continuous PIB matrix. Annealing the samples resulted in more ordered structures.Three-dimensional AFM image and section analysis indicated a height difference between PIB and PS in the block copolymers, which became more prominent during annealing. This feature was verified on compression moulded and protein coated samples. The arborescent PIB-PS materials displayed thermoplastic elastomeric behaviour with a tensile strength between 7 and 10 MPa and elongation ranging from 1000% to 1830%. In comparison, linear triblock samples had a tensile strength between 7 and 20 MPa and elongation ranging from 380% to 640%. Block copolymers with irregular elastomeric midsegments may emerge as a new class of TPEs.     

A new class of aromatic polybenzoxazoles containing ortho-phenylenedioxy groups

A series of poly(o-hydroxy amide)s having both ether and ortho-catenated phenylene unit in the main chain were synthesized via the low-temperature solution polycondensation of 4,4^′-(1,2-phenylenedioxy)dibenzoyl chloride and 4,4^′-(4-tert-butyl-1,2-phenylenedioxy)dibenzoyl chloride with three bis(o-aminophenol)s including 4,4^′-diamino-3,3^′-dihydroxybiphenyl, 3,3^′-diamino-4,4^′-dihydroxybiphenyl, and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The poly(o-hydroxy amide)s exhibited inherent viscosities in the range of 0.23-0.96 dl/g. Most of the poly(o-hydroxy amide)s were soluble in polar organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) and could afford flexible and tough films by solution casting. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s afforded polybenzoxazoles. However, the polybenzoxazoles were organic-insoluble except for those with the hexafluoroisopropylidene group. The polybenzoxazoles exhibited glass-transition temperatures (T_g) in the range of 200-232 °C by DSC and softening temperatures (T_s) of 250-256 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 500 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 546-606 °C in air and 574-631 °C in nitrogen.     

Interconversion behavior of the C-H bond in the CH4+ radical cation: ab initio molecular dynamics study

Thermal motion of CH4+ is investigated by performing an ab initio molecular dynamics method with the second-order M?ller-Plesset (MP2)/6-311G** force field. In the trajectories obtained at 400 K, we have observed rapid interconversion behavior of the geometrical parameters of CH4+ with the frequency of 0.6/ps, where the C-H pair forming the small angle around 55 degrees is switched to another pair on subpicosecond time scale. The switching patterns are found to be classified into the following two types. Type 1: one C-H of the small angled C-H pair is switched to one C-H of the other C-H pair. Type 2: the small angled C-H pair is switched to the other C-H pair, which has been newly observed in the present ab initio MD calculation. The four C-H bonds of CH4+ are characterized by the long and short C-H bonds in a time region of the trajectories, and also for the time-evolution of C-H bonds such interconversion behavior is observed. The switching patterns of the geometrical parameters are compared with those in the interconversion scheme between six equivalent C2v symmetry structures of CH4+ [Paddon-Row, M. N. et al., J Am Chem Soc 1985, 107, 7696]. We have also investigated the electronic energy fluctuation due to thermal motion of CH4+. The standard deviation of total electronic energy at 400 K is evaluated to be 1.2 kcal/mol.     

New perylene polyimides containing p‐n diblocks for sensitization in TiO2 solar cells

Three novel perylene polyimides (PPIs) containing p‐n diblock units were designed and synthesized for use in dye‐sensitized mesoporous TiO₂ solar cells. They all dissolve in m‐cresol and N‐methyl‐2‐pyrrolidone (NMP). Their visible light absorption, electrochemical and photoelectrochemical properties were systematically studied. The polyimides have band gap energies of 2.16, 2.19 and 2.25 eV deduced from ultraviolet–visible absorption spectra, and electron affinity (E_a) and ionization potential (IP) of ?3.93 and 6.10 eV for PPI1, ?3.94 and 6.13 eV for PPI2, ?3.93 and 6.59 eV for PPI3, respectively, deduced from cyclic voltammogram. Experimental data show that introduction of 4,4′‐bisaminetriphenylamine cannot only greatly enhance optic‐electro conversion efficiency, but also enhance the dissolubility which in favorable for making the devices. The relationship of structure and properties of PPI is discussed and the mechanism of photocurrent generation is explained. Copyright © 2004 John Wiley & Sons, Ltd.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

脱乙酰基对天然魔芋葡甘聚糖分子形貌的影响

通过原子力显微镜直接观察魔芋葡甘聚糖（KGM）分子的三维结构形貌，KGM水溶液铺展在经Ca^2 处理的云母片上，干燥固定后，可获得稳定，重复的图像，实验结果表明，稀溶液中KGM分子具有伸展的螺旋链状结构，单股的长度达200－400nm，厚度为1．0nm，宽度为35．0－35．2nm，脱乙酰后分子链卷曲成直径约40－50nm,厚3．5－5．0nm的弹性圆台状。     

Synthesis and Antibacterial Activities of 4-Amino-3-(1-aryl-5-methyl-1,2,3-triazol-4-yl)-5-mercapto-1,2,4-triazoles/2-Amino-5-(1-aryl-5-methyl-1,2,3-triazol-4-yl)-1,3,4-thiadiazoles and Their Derivatives

ＩｎｔｒｏｄｕｃｔｉｏｎＳｃｈｉｆｆｂａｓｅｓ ,ａｍｉｄｅｓ ,ｉｍｉｄａｚｏｌｏ[2 ,1 ｂ] 1,3,4 ｔｈｉａｄｉａｚｏｌｅｓ,ａｎｄ 7Ｈ ｓ ｔｒｉａｚｏｌｏ[3,4 ｂ] 1,3,4 ｔｈｉａｄｉ ａｚｉｎｅｓｃｏｎｔａｉｎｉｎｇｈｅｔｅｒｏｃｙｃｌｅｓｈａｖｅｂｅｅｎａｔｔｒａｃｔｉｎｇｍｕｃｈａｔｔｅｎｔｉｏｎａｓｐｏｔｅｎｔｉａｌａｎｔｉｆｕｎｇａｌａｇｅｎｔｓ .1 51,2 ,3 ｔｒｉａ ｚｏｌｅ ,6 7ｍｅｒｃａｐｔｏ 1,2 ,4 ｔｒｉａｚｏｌｅ ,81,3,4 ｔｈｉａｄｉａｚｏｌｅ9 10ａｎｄｔｈｅｉｒｒｅｌａｔｅｄｃｏ…     

One—Pot Synthese of 3,4—Dihydropyrimidine—2（1H）—thiones Catalyzed by La（OTf）3

A general and practical procedure for the syntheses of 3,4-di-hydropyrimidine-2(1H)-thiones by a one-pot condensation of aldehyde,β-ketoester or β-diketone and thiourea using La(OTf)3 as the catalyst is described.Mild reaction conditions,excellent yields as well as the environmentally friendly character of La(OTf)3 make it an important alternative to the classic acid-catalyzed Biginelli‘s reaction.     

A Note on Mathematical Relationships Among Bond-Torsion Force Fields

A set of mathematical relationship between torsion potential functions such as trigonometric and Fourier series is presented herein. A harmonic approximation form is also introduced, and its stiffness constant is related to the parameters of trigonometric and Fourier series. Mathematical relationships between various force field parameters are presented in the form of conversion matrices.     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.