聚苯基单醚喹噁啉薄膜的性能与物理老化

研究了物理老化对聚苯基单醚喹啉薄膜的结构与力学性能的影响 .用差示扫描量热计 (DSC)及正电子湮没寿命谱 (PALS)方法表征了两种不同物理老化条件试样的凝聚结构以及自由体积的差别 .结果表明 ,物理老化使聚苯基单醚喹啉薄膜玻璃化转变温度移向高温 ,在其末端出现热焓吸收峰 ,分子链堆砌紧密使自由体积减小 ,分子可动性降低 .用动态力学分析 (DMTA)以及静态拉伸性能测试等方法研究了两类试样的力学性能 ,结果表明 ,物理老化后 ,试样的动态储能模量稍有增加 ,力学损耗降低 .而静态拉伸实验的断裂应变降低 ,屈服应力增加 ,断裂能降低 ,试样在宏观上由韧性断裂变为明显的脆性断裂 .     

Carbon nanotube assisted synthesis of CeO2 nanotubes

CeO₂ nanotubes have been synthesized facilely using carbon nanotubes (CNTs) as templates by a liquid phase deposition method. The properties of the CeO₂ nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectrum (XPS) as well as thermogravimetry and differential thermal analysis (TG-DTA). The obtained CeO₂ nanotubes with a polycrystalline face-centered cubic phase have a uniform diameter ranging from 40 to 50 nm. The CeO₂ nanotubes are composed of many tiny interconnected nanocrystallites of about 10 nm in size. The pretreatment of CNTs and calcination temperature were confirmed to be the crucial factors determining the formation of CeO₂ nanotubes. A possible formation mechanism has been suggested to explain the formation of CeO₂ nanotubes.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

物理老化对聚苯基单醚喹啉薄膜银纹化的影响

物理老化实质上是聚合物材料在 Tg 以下存放过程中 ,其凝聚态结构通过链段或更小运动单元的运动 ,从热力学非平衡态向平衡态过渡的一个结构弛豫过程[1] .在这一过程中 ,聚合物的密度、自由体积、焓、熵和力学性质随温度和时间产生变化 .因为银纹化是聚合物的特性 ,所以银纹化也将随结构回复过程而产生变化 .有关物理老化对聚合物银纹化的影响尚未得出一致的结论 [2～ 4 ] .聚苯基单醚喹啉 (结构见 Scheme1 )是一种高性能的芳杂环聚合物 [5] ,它可以在比较苛刻的条件下作为绝缘材料和膜材料使用 .有关这类高性能的芳杂环聚合物的物理老化…     

Chemischer Transport von Cr2O3 mit CrI3/I2 – Experimente und Modellrechnungen zur Beteiligung von CrOI2,g

On the Chemical Transport of Cr₂O₃ with CrI₃/I₂ – Experiments and Model-Calculations for Participation of CrOI_2,g Gaseous chromium oxyiodides that were unknown up to now cause the migration of Cr₂O₃ in the temperature gradient 1 000°C→900°C when iodine (e. g. 0.1 mmol/ml) and CrI₃ is added (eq. (1)). Transport agent for Cr₂O₃ is gaseous CrI₄. With a smaller concentration of iodine (D(I₂) ? 0.016 mmol/ml) and lower temperatures (e.g. T? = 850°C) the influence of H₂O (from the wall of the silica ampoule) becomes more important. Under these conditions the transport of Cr₂O₃ is a result from the endothermic reactions (2), (3) and (4). H_2,g has on the basis of the decomposition of HI_g a positive difference of the solubility and H_2,g should not to be considered as a transport agent. Because of the range of equilibrium-values the reaction 4 has to be taken into consideration. Estimated value of the enthalpie for CrOI_2,g is fixed more precisely by thermodynamic model calculation to Δ_fH°₂₉₈(CrOI_2,g) = ?51.4 kcal/mol. The estimated limit of error for the enthalpie of formation is smaller than ± 5 kcal/mol. Without an addition of CrI₃ is in the system Cr₂O₃/I₂ a migration of Cr₂O₃ not observable.     

Conformational energies of cyclenes

An universal function for non-bonded interactions, which takes into account the relative orientation of the bonds is considered in calculating the conformational energies of cycloalkenes and cycloalkadienes. A comparison is made with previous results obtained by using usual 6-exp functions for non-bonded interactions.     

Sorption of water vapor on cation-substituted vermiculite

Deformations of Na, Ca, and Ba vermiculites upon sorption of water vapor have been determined by a dilatometric method. Sequential stages in the hydration of interlayer exchange cations have been identified. The experimental results have been compared with data obtained in studies using adsorptive, calorimetric, and x-ray methods.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Institute of Colloid Chemistry and the Chemistry of Water, Academy of Sciences of the Ukraine, Kiev. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 34–39, January, 1992.     

马来酸酐与1，2－环己烷二羧酸二异丁酯的气液平衡

采用小沸点仪测定了马来酸酐和1,2－环己烷二羧酸二异丁酯二元系统在不同配料组成条件下的温度与压力数据，并通过内插法得到不同压力下的温度与配料组成的数据.进一步采用单纯形法优化NRTL方程参数，推算了平衡气液相组成，发现该二元系统具有最高压力恒沸点，且该恒沸点随压力的变化显著.当压力降低至20 kPa时, 由温度随气相组成的变化趋势知该恒沸点将趋于消失.     

Orthogonal PbS nanowire arrays and networks and their Raman scattering behavior

Three-dimensional, orthogonal lead sulfide (PbS) nanowire arrays and networks have been prepared by using a simple, atmospheric pressure chemical vapor deposition (APCVD) method. These uniform nanowires (average diameter 30 nm) grow epitaxially from the surface of the initial PbS crystal seeds and form orthogonal arrays and networks in space. The growth mechanism has been explored, and the process was classified as homogeneous, epitaxial growth in the 200 directions. Furthermore, Raman spectra of PbS nanowires are reported here, and their characteristic Raman peak (190 cm(-1), no shoulder) could be used as a unique probe for the study of PbS nanomaterials.     

Optical emission spectroscopy as a real time diagnostic tool for plasma-assisted deposition of TiN

Real-time optical emission spectroscopy (OES) was used to monitor the deposition of TiN both from mixtures of tetrakis(dimethylamino)titanium (TDMATi)-N₂ and TiCl₄-H₂-N₂ in an electron cyclotron resonance chemical vapor deposition system. The accurate control of the ratio of the emission intensities of ionized nitrogen at 391.4 nm and molecular nitrogen at 357.7 nm (N ₂ ⁺ /N₂) led to low temperature deposition of stoichiometric TiN (Ti/N ≈ 1) and very low resistivity in both cases. It was found that high ion density plasmas are crucial for a considerable reduction of the deposition temperature while maintaining good film quality. OES shows that the abundance of certain excited plasma species is not only dependent on the gas mixture and the deposition parameters, such as total pressure and microwave power, but also is strongly affected by the magnetic field configuration. The deposition rate and the film resistivity can be related to the emission intensity ratio, I(N ₂ ⁺ )/I(N₂). Finally, the two processes are compared in terms of the quality of as-deposited and heat-treated films. The comparison shows that the films obtained with TDMATi exhibit lower resistivity and are thermally more stable than with TiCl₄.