Excess thermodynamic properties of the 2-propanol + dichloromethane system at 25°C

Densities, viscosities, enthalpies, vapor-liquid equilibria, and surface tensions were determined at 25°C for the 2-propanol+dichloromethane system. From the experimental results excess volumes, viscosities, enthalpies, Gibbs energies, and excess surface tensions were calculated. An attempt has been made to explain the observed deviations from ideal behavior on the basis of intermolecular interactions.     

利用无水乙醇分解制备碳纳米管

利用CVD法高温分解无水乙醇,以分子筛（合成皂石）基体上的Fe颗粒为催化剂,制备出了管壁更薄、端部为开口结构的碳纳米管.本实验制备出的碳纳米管,相对于传统CVD方法制备出的碳纳米管,在实验条件控制稳定的情况下,管壁较直、缺陷较少、管内径较大.具有这样结构的碳纳米管在储氢等方面应具备更为优良的效果,从而有着潜在的应用前景.     

An electrothermal vaporization unit with axially focusing convection upstream. Part II: Modeling of the condensation process

A model is presented that describes quantitatively the condensation of analytes in pico- and nanogram masses sampled with electrothermal vaporization (ETV). It presumes that the analyte vapor condensation of such low amounts occurs mainly heterogeneously, predominantly on growing carbon particulates originating from the graphite furnace before the analyte vapor achieves saturation via cooling. The model regards the coagulation of carbon particles and the diffusion of analyte atoms. The criterion whether or not an analyte atom sticks to a colliding particle is chosen as a function depending on its temperature and on the common GFAAS pretreatment temperatures. Heterogeneous condensation of six analytes with different volatilities, Ag, Cu, Fe, Ni, Mn, and Pb, is calculated for the ETV unit with an axially focusing convection upstream described in Part I. Modifier effects are taken into account. The results are compared to measured data.     

Formation of Supramolecular Polymers Constructed by Cyclodextrins with Cinnamamide

-Cyclodextrin having cinnamamide at 6- or 3-positions (6-CiNH--CD, 3-CiNH--CD) and -cyclodextrin with cinnamamide on 6-position (6-CiNH--CD) have been prepared. Supramolecular structures were formed in the solid state or aqueous solutions and characterized by measurements of NMR and vapor pressure osmometry (VPO). The results indicate that 6-CiNH--CD formed insoluble supramolecular polymers in the solid state, while 6-CiNH--CD and 3-CiNH--CD formed supramolecular complexes in aqueous solutions. 6-CiNH--CD was found to form a dimer in an aqueous solution. 3-CiNH--CD formed intermolecular complexes to give supramolecular polymers. The differences of the position of guest part on cyclodextrins caused to give a variety of supramolecular structures in aqueous solutions.     

Free energies of transfer of complexes of the type MCl2py4 between pyridine and other solvent media

Solubility isotherms are reported for the NiCl₂·4py, MnCl₂·4py, and MnCl₂·2py solid pyridinates in a number of pyridine+diluent mixtures at 25°C. Activity coefficients of the solvent components have been derived from the total vapor pressures measured by a static method. The standard free energies of transfer for the NiCl₂py₄ and MnCl₂py₄ complexes are the same, within the experimental error, in the pyridine+aprotic diluent mixtures, while marked differences are observed in the pyridine+chloroform mixtures. Marked deviations are observed for chloroform and 1,2-dichloroethane from a correlation between the standard free energy of transfer of the complexes, on one hand, and the Hildebrand's solubility parameter of the solvent, on the other, the latter correlation being roughly valid for aprotic solvents. The deviations are tentatively ascribed to hydrogen bond formation of the type H... between the protic solvents and the coordinated pyridine molecules, enhanced by the d electron delocalization.     

Modification of silica gel with diethylamino group by novel reaction and its characterization

1,3,5,7-Tetramethylcyclotetrasiloxane (H₄) was deposited on silica gel at 80°C by utilizing a chemical vapor deposition (CVD) method, where it was catalytically polymerized to form a surface coating of polymethylsiloxane (PMS). Treated silica gel (PMS-Si) increased in weight up to a plateau level, and there was no further increase with increasing reaction time. The film of PMS was partially cross linked; typical values of crosslinking ratio and film thickness were 2% and 0.6 nm, respectively. An anionic ion exchanger containing diethylamino groups was synthesized from PMS-Si by hydrosilylation of allyl glycidyl ether followed by treatment with diethylamine. Its structure was confirmed by¹³C and²⁹Si CP/MAS NMR spectroscopy and FT-IR spectrophotometry. Characterization of silica gel (DEA-Si) modified with diethylamino group was evaluated by a packing of the column for liquid chromatography. As a mixture of five nucleotides was completely separated, it was recognized that DEA-Si was operated by ion exchange action. Because the surface of the silica gel was covered with hydrophobic PMS, the peak heights and retention times did not change after washing of the column with alkaline solution.     

Mechanical properties decay and morphological behaviour of biodegradable films for agricultural mulching in real scale experiment

The use of plastic materials in agriculture causes the serious drawback of huge quantities of waste. The introduction of biodegradable materials, which can be disposed directly into the soil, can be one possible solution to this problem. Biodegradable materials are actually innovative materials; therefore, their physical properties must be evaluated in relation to their functionality during the use in field. In the present research results of experimental tests carried out on biodegradable films used in strawberries protected cultivation are presented. The decay of some relevant physical parameters of biodegradable films during the cultivation period was monitored by laboratory tests (SEM analysis, mechanical tensile tests and infrared reflectance spectroscopy). Infrared spectroscopy clearly indicated that the mechanical degradation starts from the starch component of the material. Tensile tests showed that the value of elongation at break of biodegradable materials decreased in some cases by 300% after 10 days of field application.     

功能性超薄有序分子沉积膜的制备及其结构研究

1991年G.Decher等首次探讨了阴阳离子与聚电解质交替沉积制备有机超薄膜的方法。我们在完善成膜技术和发展成膜基质的基础上,详细研究了其成膜过程与膜的结构,并定义这种新的自组装超薄有序膜为分子沉积膜——MD膜。MD膜是利用阴阳离子的静电吸附反应特性,通过相反离子体系的交替分子沉积制备的层状有序自组装多层超薄膜。需要指出的是,分子沉积既是有机超薄膜的制备技术,本身又是一种自组装超薄有序膜。MD膜制备工艺简单,热稳定性和长期稳定性好,不受基体形状与面积限制。     

Pure Organic Phase Phenol Biosensor Based on Tyrosinase Entrapped in a Vapor Deposited Titania Sol‐Gel Membrane

A novel amperometric biosensor was constructed for the determination of phenols in pure organic phase. This biosensor was fabricated by immobilizing tyrosinase in a titania sol‐gel membrane which was obtained with a vapor deposition method. This method was facile and avoided the calcination step needed in conventional titania sol‐gel process. The titania sol‐gel membrane could effectively retain the essential water layer around the enzyme molecule needed for maintaining its activity in organic phase. The experimental parameters such as solvent and operating potential were optimized. At ?100 mV this biosensor showed a good amperometric response to phenols in pure chloroform without any mediator and rehydration of the enzyme. For catechol determination the sensor exhibited a fast response of less than 5 seconds. The sensitivity of different phenols was as follows: catechol > phenol > p‐cresol. Additionally, the apparent Michaelis‐Menten constants of the encapsulated tyrosinase to catechol, phenol and p‐cresol were found to be 0.15±0.003, 0.17±0.008 and 0.21±0.004 mM, respectively. The biosensor had also good reproducibility and stability. This work provided a promising platform for the construction of pure organic phase biosensors and the determination of substrates with poor water solubility.     

与时俱进，不断开创物理化学课程建设新局面

As a necessary basic theory course for undergraduates majoring in chemistry, materials, pharmacy, chemical engineering, and biology, physical chemistry plays an important role in cultivating talents to meet the needs of social and economic development. Over the years, the teaching team of physical chemistry of East China University of Science and Technology has carried out the curriculum reform and innovation persistently based on "Team building as the foundation, resource building as the root, mode innovation as the soul, ability training as the origin". This paper will summarize our thinking and experience in striving for the first-class course from the aspects of first-class team construction, first-class resource construction, teaching connotation innovation, teaching mode exploration, and extract the experience that can be used as reference by teaching peers.