Use of zwitterionic buffer additives to improve the separation of proteins in capillary zone electrophoresis

In CZE, the adsorption of the proteins on the capillary wall is a common problem. This paper describes the simple method of utilizing zwitterionic buffer additives to improve the separation of proteins in untreated fused silica capillaries at neutral pH. Three kinds of zwitterion are evaluated in the separation of acidic, neutral, and basic proteins, including their effect on protein efficiency, mobility, separation, and resolution; the difference between the effects of the different additives are also highlighted. The method has proved to be a possible means of reducing protein adsorption, especially for basic proteins.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Enthalpies of sorption of linear hydrocarbons (C2–C8) and chloroderivatives of methane and ethylene on the surface of hydrotalcite

Differential molar adsorption enthalpies (DMAE) were determined by gas chromatographic measurements of specific retention volume of vapors on the surface of two forms of Mg–Al hydrotalcite. A linear dependence of the DMAE on the number of the carbon atoms in hydrocarbons was observed for both form of hydrotalcite. The dependence of the differential molar adsorption enthalpies on the number of chlorine atoms in organic molecules is discussed. A linear dependence of DMAE on the molecular weight of chloroderivatives of methane and ethylene on the basic form in an order monochloromethane < dichloromethane < trichloromethane or vinylidene chloride < 1,1-dichloroethylene < trichloroethylene was found.     

Bio-regeneration of p-complexation desulfurization adsorbents

More and more stringent regulations of gasoline and diesel oil were proposed with the awareness of environmental protection. Hydrodesulfurization (HDS) is a conventional method to remove sulfur compounds for industrial purpose. The main drawbacks of this …     

Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.     

A Monte Carlo simulation of the heterogeneous adsorption of hydrogen ions on metal oxides: Effect of inert electrolyte

Charging of the surface of an oxide caused by the adsorption of hydrogen ions and ions of inert 1:1 electrolyte was investigated by using grand canonical Monte Carlo simulation technique. In particular, adsorption isotherms of protons as well as of ions of the electrolyte together with the resulting charge density of the surface were obtained for different system parameters. Also, the effect of the surface energetic heterogeneity and the concentration of the background electrolyte on the isotherms and the charge density curves was examined. Furthermore, lateral interactions in the mixed adsorbed phase were taken into account in the modeling of the system behavior. The obtained results, in general, suggest that the three factors mentioned above may have substantial influence on the charging mechanism at the liquid/oxide interface.     

固定化单宁对酒类营养成分的吸附性能研究

采用固定化单宁对酒中可能存在的营养成分蛋白质、氨基酸、糖类、有机酸、乙醇和铁离子等进行吸咐试验。结果表明：固定化单宁对不同营养成分的吸附率差别明显，它通过氢键和疏水作用对蛋白质有较大的吸附率，通过多个酚羟基与中心铁离子形成螯合物而对其有较大的吸附率，对氨基酸、糖、有机酸和乙醇等营养成分或风味物质吸附率不大，固定化单宁可以作为一种较为理想的酒类处理剂。     

Insertion of benzothiazolium compounds into montmorillonite interlayers

Benzothiazolium compounds exhibit pronounced antimicrobial activities and stimulation effects on plant growth. When applied to fields they can pollute soil colloids. In contact with the soil they can potentially interact with a clay fraction giving rise to clay organocomplexes. Model intercalation complexes were prepared using monoionic montmorillonite and a variety of water-soluble benzothia zolium salts. It was found that the adsorption into the silicate interlayer space proceeds via a cation exchange process. Substantial differences were observed in the extent of the reaction between non-substituted andN-substituted species. The sulphur atoms present in the benzothiazolium molecules repel the surface oxygen atom: this is considered to be the factor responsible for prevention of insertion of the guest cations perpendicular to the layers.     

Viscometric study of gelatin in dilute aqueous solutions

The viscosities of aqueous solutions of gelatin at different temperatures were carefully measured in a common glass‐capillary Ubbelohde viscometer at dilute to extremely dilute concentrations. The adsorption effect that occurred in the viscosity measurements was theoretically analyzed and discussed. A theory based on Langmuir isotherms could adequately describe the existing data. Some structural information was obtained by the use of an iterative fitting procedure to treat the reduced viscosity data, which disclosed that individual gelatin chains underwent a coil‐to‐helix transition as the solution cooled from 40 to 15 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1804–1812, 2006     

The effect of oxidation on physical properties of porous silicon layers for optical applications

In order to understand the optical loss mechanisms in porous silicon based waveguides, structural and optical studies have been performed. Scanning and transmission electron microscopic observations of porous silicon layers are obtained before and after an oxidation process at high temperature in wet O₂. Pore size and shape of heavily p-type doped Si wafers are estimated and correlated to the optical properties of the material before and after oxidation. The refractive index was measured and compared to that determined by the Bruggeman model.