Characterization of the channel walls roughness in photonic crystal fibers

We present electron microscope (FEI NanoSEM) and atomic force microscopy measurements of surface roughness in nanochannels in photonic crystal fibers (PCF). A method was invented to cleave the PCF along the axis without damaging the surface structure in the nanochannels allowing us to characterize the morphology of the nanochannels in the PCF. A multi-wall carbon nanotube mounted onto commercial AFM probes and super sharp silicon non-contact mode AFM probes were used to characterize the wall roughness in the nanochannels. The roughness is shown to have a Gaussian distribution, and has an amplitude smaller than 0.5 nm. The height–height correlation function is an exponential correlation function with an autocorrelation length of 13 nm, and 27 nm corresponding with scan sizes of 200×100 nm², and 1600×200 nm², respectively.     

缺陷态透射率可调的三缺陷层的一维光子晶体

利用传输矩阵方法,从理论上研究了三缺陷层一维光子晶体的光学性质.在缺陷层间距足够大以致于出现缺陷态简并的情况下,调节第一或第三个缺陷层的光学厚度,光子晶体缺陷态的透射率会发生最大程度的变化.这种结构可同时具有窄带滤波器和光开关的功能,据此提出了一种低阈值光开关的设计.把折射率可调的向列型液晶作为晶体的第三个缺陷层,并用4×4传输矩阵方法计算了其缺陷态透射率与电场电压的关系.     

二维光子晶体异质结构的带隙分析

提出异质结构的二维光子晶体模型,用时域有限差分法计算其带隙,数值计算结果表明,其带隙宽度变大.     

Enhanced-performance relative humidity sensor based on MOF-801 photonic crystals

We proposed an enhanced-performance relative humidity (%RH) nano-sensor based on MOF-801/TiO₂ one-dimensional photonic crystals (1DPC). The maximum reflectance-peak wavelength of it shifted obviously in the range of 20%-90% under varying %RH levels, due to the highly moisture-sensitive MOF-801 film in the 1DPC structure. It was demonstrated that the linear spectrum sensitivity of the MOF-801/TiO₂ %RH 1DPC sensor is exceeding 119 pm/%RH from 20%RH to 90% RH, and the sensitivity of reflection power variations exhibits 1.34 dB/%RH with the resolvable relative humidity variation less than 0.1%RH at 15°C. Meanwhile, the sensor shows a fast optical response time less than 100 ms with exceptional repeatability and reliability, which promises successful measurements of human respiration. Moreover, the sensor performance on the structure of 1DPC is investigated, representing a tradeoff between the sensing sensitivity and response time.     

Mixed Fano-SP resonant absorption of THz electromagnetic waves in a photonic resonator contacting with a metal film

In terahertz frequency region, we have investigated theoretically the correlation between spectra of a free photonic structure and that deposited on a metal for several models of metal. It was found that for quasi-normal incidence of p-polarized electromagnetic field the presence of metal generates narrow spectral wells in the middle of reflection windows existing in a free photonic crystal. Quite another manifestation of metal-resonator inter-influence takes place at incident angles exceeding the Brewster angle when reflection spikes coincide with modes of photonic crystal resonator and they are absent throughout the stopband areas. The effects are strongly depended on polarization, number of periods and angle of incidence.     

Asymptotic approximations for Bloch waves and topological mode steering in a planar array of Neumann scatterers

We study the canonical problem of wave scattering by periodic arrays, either of infinite or finite extent, of Neumann scatterers in the plane; the characteristic lengthscale of the scatterers is considered small relative to the lattice period. We utilise the method of matched asymptotic expansions, together with Fourier series representations, to create an efficient and accurate numerical approach for finding the dispersion curves associated with Floquet–Bloch waves through an infinite array of scatterers. The approach lends itself to direct scattering problems for finite arrays and we illustrate the flexibility of these asymptotic representations on topical examples from topological wave physics.     

光子晶体光纤温度压力传感器

提出了一种在高温环境下同时测量温度和气压的光子晶体光纤温度压力传感器.在普通单模光纤和光子晶体光纤之间熔接一段空心光纤构成干涉结构.空心光纤段构成非本征法布里-珀罗干涉仪,利用光子晶体光纤的微孔与外界相通,通过气体折射率变化来测量环境中的气压变化;光子晶体光纤段构成本征法布里-珀罗干涉仪,利用热膨胀效应和热光效应来测量环境中的温度.传感器的解调通过自制的白光干涉解调仪实现,实验通过测量腔长得到被测环境的温度和气压.在不同温度和气压环境下,对腔长分别为306μm和1535μm的温度压力光纤传感器进行连续测量.实验结果表明,传感器能够在28~800℃的温度下和0~10 MPa的气压下稳定工作,测量范围内温度灵敏度可达17.4 nm/℃,压力灵敏度随温度增加而降低,在28℃时可达1460.5 nm/MPa.     

光子晶体光纤非线性系数与其结构参量及光波长的关系

推导计算了全内反射型光子晶体光纤的非线性系数与其两个几何结构参量:包层空气孔半径和空气孔间距之间的关系,给出了输入光波长为1550 nm处,非线性系数与这两个结构参量之间的关系曲线并对其进行了分析.给出了全内反射型光子晶体光纤的非线性系数随输入光波长变化的曲线,分析了短波处高非线性系数产生的原因并指出这一特性的应用潜力.     

混合纤芯光子晶体光纤超平坦色散的研究

利用平面波展开法,系统地研究了一种具有混合纤芯结构的光子晶体光纤的色散特性. 数值计算结果表明,通过优化结构参量,这种新型结构的光子晶体光纤在通信窗口1.55 μm 附近可以获得带宽超过800 nm的超平坦色散区域（色散曲线的变化范围不超过 ±0.6 ps·km－1·nm－1）.     

INVERSE OPALINE STRUCTURE TITANIA PHOTONIC CRYSTALS BY FUNCTIONALLY MODIFIED COLLOIDAL CRYSTALS TEMPLATING

Ordered macroporous titania photonic crystals （PCs） and photonic balls were fabricated by functional modified polymer colloidal crystals. The TiO2 PCs and balls formed through this method exhibit no cracks and lacunae in large areas on their surface and their inner structures.