Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Catalytic Aerobic Oxidation of Biomass‐based Furfural into Maleic Acid in Aqueous Phase with Metalloporphyrin Catalysts

Catalytic oxidation of renewable furfural into valuable maleic acid in aqueous solutions using metalloporphyrin catalysts was investigated for the first time. The synthesized catalysts were characterized by FT‐IR , UV –vis, ¹H NMR , elemental analysis, and TGA . The catalysts varied in metal active sites and functional groups, which had different effects on their catalytic activity. Furthermore, the effects of temperatures, reaction time, catalyst loading, and oxygen pressure were studied in detail. Maleic acid could be achieved in 44% yield by using FeT (p‐Cl)PPCl as catalyst under optimal conditions. Finally, FeT (p‐Cl)PPCl could be reused in five consecutive runs without a significant loss of activity.     

A new polymer acceptor containing naphthalene diimide and 1,3,4‐thiadiazole for all‐polymer solar cells

A n‐type conjugated polymer containing naphthalene diimide (NDI) and 1,3,4‐thiadiazole (TZ) moieties, named PNTZ, has been synthesized and applied for all‐polymer solar cells (all‐PSCs). By the incorporation of TZ unit into the polymer main chains, the lowest unoccupied molecular orbital level of this polymer has been adjusted effectively. In addition, the electron‐acceptor PNTZ shows a broad absorption spectrum in the range of 300–700 nm, and possesses complementary absorption spectrum with the electron‐donor PTB7‐Th. On the basis of PNTZ as the acceptor and PTB7‐Th as the donor, the all‐PSCs are fabricated. After optimization, the well blend morphologies with a continuous D/A interpenetrating network are observed and the best all‐PSC device exhibits a power conversion efficiency of 4.35% with a high short‐circuit current density of 13.26 mA cm^?2. This research demonstrates that the TZ‐containing polymer PNTZ is a promising non‐fullerene acceptor for high efficiency all‐PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 990–996     

Fervent Hype behind Magnesium Batteries: An Open Call to Synthetic Chemists—Electrolytes and Cathodes Needed

Magnesium metal is a superior anode which has double the volumetric capacity of lithium metal and has a negative reduction potential of −2.37 V vs. the standard hydrogen electrode. A major benefit of magnesium is the apparent lack of dendrite formation during charging which is one of the crucial concerns of using a lithium metal anode. In this Review, we highlight the foremost research in the development of electrolytes and cathodes and discuss some of the significant challenges which must be overcome in realizing a practical magnesium battery.     

Highly efficient preparation of 5-hydroxymethylfurfural from sucrose using ionic liquids and heteropolyacid catalysts in dimethyl sulfoxide–water mixed solvent

Several types of ILs and solid acids were used as catalysts in one-pot conversion of sucrose to 5-hydroxymethylfurfural (abbreviated as 5-HMF) in a dimethyl sulfoxide (DMSO)/water mixed solvent under hydrothermal conditions. A remarkable 5-HMF yield of 91.8% was achieved catalyzed by the cesium salt of dodecatungstophosphoric acid (Cs_2.3H_0.7PW₁₂O₄₀) within 3 h at 180 ℃. The ionic liquid N-methylimidazolium hydrogen sulfate ([Hmim][HSO₄]) gave the 5-HMF in 82.0% yield from sucrose. To the best of our knowledge, it was almost the highest yield of HMF from sucrose by now. Various reaction parameters including reaction temperature and time and catalyst dosage were optimized. A possible mechanism for this catalytic process was proposed. Furthermore, fructose and glucose were also investigated, good yields of 5-HMF was obtained respectively. This increases the possibility of large-scale production of 5-HMF from carbohydrates.     

Integrated Devices to Realize Energy Conversion and Storage Simultaneously

Other forms of energy are generally converted to electric energy and then transported to electrochemical devices, where the energy is stored, by external electric wires. To further improve total energy conversion and storage efficiency, interest in simultaneously realize the energy conversion and storage in a single device has increased. This Concept describes recent progress in developing such novel integrated energy devices. Both planar and wire architectures are carefully illustrated with an emphasis on the “energy wire” which has been the focus of past developments due to its unique and promising applications, such as being woven into clothes or other complex structures by conventional textile technology. The current challenges and future directions of the integrated devices, particularly in the wire architecture, are summarized.