Assessment of nanocomposites based on unsaturated polyester resin/nanoclay under impact loading

The aim of this study is to investigate the performance of nanoclay reinforced unsaturated polyester (UP) resin under impact loads. Nanocomposite specimens containing nanoclay in 0, 1.5, and 3 (wt%) were prepared by melt mixing method. X‐ray diffraction, transmission electron microscopy analysis, scanning electron microscope photographs, and viscosity changes in liquid state resin confirmed exfoliation and intercalation of the nanoclay in the UP resin system used. Tensile modulus showed an increase with increase in nanoclay content. However, the tensile strength and elongation at break exhibited reducing performance with increase in nanoclay content. Izod impact test results indicated better performance for the specimens containing nanoclay reinforcements, with 1.5 (wt%) of nanoclay specimens showing the highest value. High velocity impact tests were carried out using gas gun in velocity range of 20–100 m/sec and harden steel hemispherical tip projectile with diameter of 8.7 mm and weight of 11.54 g. Results for high velocity impact test indicated better performance by the specimens containing nanoclay, with 1.5 (wt%) nanoclay showing the highest attained value. Damage assessments of impact area for all specimens showed spalling type brittle failure with punch out and sever fragmentation pattern. Copyright © 2011 John Wiley & Sons, Ltd.     

On modifying properties of polymeric melts by nanoscopic particles

We study geometric and energetic factors that partake in modifying properties of polymeric melts via inserting well‐dispersed nanoscopic particles (NP). Model systems are cis‐1,4‐polybutadiene melts including a single atomic clusters of size varied in the range 10–150 atoms (3–7 Å in radius; 0.1–1.5% v/v). We modify the interactions between the chains and the particle by tuning attractive van der Waals interactions. Using molecular dynamics, we study equilibrium fluctuations and dynamical properties at the interface. The NPs move in the polymer matrix in two different regimes corresponding to trapped and free diffusion, depending on the NP size. Furthermore, degree of crowding around the NP by the polymer chains is quantified. Effect of NP size and interaction strength both on volume and volumetric fluctuations is manifested in mechanical properties, quantified here by bulk modulus, K. Tuning NP size and nonbonded interactions results in ～15% enhancement in K by addition of a maximum of 1.5% v/v NP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

High‐TC Ferromagnetic Semiconductor‐Like Behavior and Unusual Electrical Properties in Compounds with a 2×2×2 Superstructure of the Half‐Heusler Phase

Heusler phases, including the full‐ and half‐Heusler families, represent an outstanding class of multifunctional materials on account of their great tunability in compositions, valence electron counts (VEC), and properties. Here we demonstrate a systematic design of a series of new compounds with a 2×2×2 superstructure of the half‐Heusler unit cell in X–Y–Z (X=Fe, Ru, Co, Rh, Ir; Y=Zn, Mn; Z=Sn, Sb) systems. Their structures were solved by using both powder and single‐crystal X‐ray diffraction, and also directly observed by using high‐angle annular dark‐field imaging in a scanning transmission electron microscope (HAADF‐STEM). The VEC values of these new compounds span a wide and continuous range comparable to those for the full‐ and half‐Heusler families, thereby implying tunability in compositions and physical properties in the superstructure. In fact, we observed abnormal electrical properties and a ferromagnetic semiconductor‐like behavior with a high and tunable Curie temperature in these superstructures.     

Tailoring the properties of electrospun PHBV mats: Co-solution blending and selective removal of PEO

Microstructure, surface topography, thermal and mechanical features of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) electrospun non-woven mats were modified, modulated and tailored through blending with different polyethylene oxide (PEO) amounts (20, 30 and 50% wt/wt). The optimal parameters of the soaking protocol for the selective removal of the sacrificial polymer were accurately identified by means of scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy, simultaneous thermogravimetric and differential analyses (TG-DTA) and differential scanning calorimetry (DSC). The complete PEO removal after soaking in H₂O for 7 days with daily refreshment was confirmed. The resulting samples were only comprised of PHBV fibers characterized by a remarkable decrease of the average size with respect to the respective blends. Their surface topography was corrugated and rough and presented nodules, pits, nanopores, shallow and elongated nanostructured indents/grooves along the fiber axis. A remarkable reduction (>75%) of the tensile modulus (E) of electrospun PHBV mats (15–20 MPa) was obtained, maintaining comparable elongation at break (ε_max) values (20–30%).     

Effect of Bi-doping and Mg-excess on the thermoelectric properties of Mg2Si materials

In this work, Bi-doped magnesium silicide compounds were prepared by applying a combination of both, short-time ball milling and heating treatment. The effect of Mg excess was also studied, aiming towards further improvement in thermoelectric properties. The structural modifications of all materials were followed by Powder X-ray diffraction and Scanning Electron Microscopy. Highly dense pellets of Mg₂Si_1−xBi_x (0≤x≤0.035) and Mg_2+δSi_0.975Bi_0.025 (δ=0.04, 0.06 and 0.12) were fabricated via hot pressing and studied in terms of Seebeck coefficient, electrical and thermal conductivities and free carrier concentration. Their thermoelectric performance, at high temperature range, is presented and the maximum value of the dimensionless-figure-of-merit (ZT) is found to be 0.68 at 810 K, for Mg₂Si_0.97Bi_0.03.     

Dependence of electronic and optical properties of multilayer SiC and GeC on stacking sequence and external electric field

The electronic and optical properties of different stacked multilayer SiC and GeC are investigated with and without external electric field (EEF). The band gaps of multilayer SiC and GeC are found smaller than that of monolayer SiC and GeC due to the interlayer coupling effect. When EEF is applied, the direct band gaps (ΔK–M) of multilayer SiC and direct band gaps (ΔK–K) of multilayer GeC all turn to indirect band gaps (ΔK–G) as the band at the G point drops dramatically toward zero. The imaginary part ε₂(ω)s of multilayer SiC and GeC show that new absorption peaks between 2–5 eV appear when the polarized direction is perpendicular to the layer plane, and new absorption peaks in infrared region appear as the EEF is higher than a certain point when the polarized direction is parallel to the layer plane. Our calculations reveal that different stacking sequences and EEF can provide a wide tunable band structures and optical properties for multilayer SiC and GeC.     

Improving waterproof/breathable performance of electrospun poly(vinylidene fluoride) fibrous membranes by thermo‐pressing

Facing the ever‐increasing demand for waterproof/breathable materials, a rapid and efficient fabrication method of these functional materials with excellent performance as well as robust mechanical properties remains challenging. Herein, a simple and scalable strategy referred to as thermo‐pressing is introduced to improve the waterproof/breathable performance and mechanical properties of electrospun PVDF fibrous membranes. The synergistic effect of temperature and pressure acted on the electrospun PVDF membranes on the fiber morphology and crystal structure was investigated, which can be able to effectively enhance waterproof performance and mechanical properties, endowing the as‐prepared membranes with a modest breathability. The membranes thermo‐pressed at 150 °C with a pressure of 8.27 MPa exhibit robust tensile strength of 40.65 MPa, which is superior to those of the previous reports (below 32.8 MPa). Notably, the optimized membranes enable to show a high hydrostatic pressure of 102 kPa, good WVTR of 10.87 kg m⁻² d⁻¹ and excellent abrasion resistance, which implies that the thermo‐pressing is an efficient and facile way to steer the fiber morphology and crystal structure of electrospun membranes to improve their application performance. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 36–45     

Hybrid inorganic–organic poly(carborane‐siloxane‐arylacetylene) structural isomers with in‐chain aromatics: Synthesis and properties

Structural isomers of thermo‐oxidatively stable poly(carborane‐siloxane‐arylacetylene) (PCSAA), namely, m‐PCSAA and p‐PCSAA, were synthesized by the reaction of the dimagnesium salts of m‐diethynylbenzene or p‐diethynylbenzene with 1,7‐bis(chlorotetramethyldisiloxyl)‐m‐carborane. The developed polymers have exceptional thermo‐oxidative properties similar to their diacetylene counterpart poly(carborane‐siloxane‐acetylene), PCSA. Thermal treatment of either of the PCSAAs results in a fully crosslinked thermoset by 500 °C resulting from the cycloaddition reactions involving the acetylene and aryl functionalities and subsequent formation of bridging disilylmethylene entities as discerned from Fourier transform infrared, ¹³C and ²⁹Si solid‐state NMR, and XPS studies. X‐ray diffraction analysis revealed that the thermosets obtained from p‐PCSAA possess enhanced crystallinity when compared to that obtained from m‐PCSAA possibly due to more efficient packing interactions of the p‐diethynylbenzene groups during thermoset formation. The presence of the aryl groups in the backbone of the PCSAAs' chains appeared to have enhanced the storage and bulk moduli of their thermosets when compared to the thermoset of PCSA. Dielectric studies of m‐PCSAA and p‐PCSAA revealed segmental relaxation peaks, α, above their glass transition temperatures with p‐PCSAA exhibiting a broader peak with a slower relaxation rate than m‐PCSAA. © 2013 Wiley Periodicals, Inc.^? J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2638–2650     

Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013