聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶)与本征态聚苯胺的氢键自组装及其光电转换性能

合成了一种新的共聚体——聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶), 它含有吡啶环, 能作为氢受体与本征态聚苯胺进行氢键自组装. 在紫外光照下, 组装膜通过偶氮磺酸基的光解, 形成稳定的共价交联结构, 在电解质水溶液中也不被破坏, 可用作光电转换膜, 并能在盐水溶液中直接测定它的光电流. 结果表明含有本征态聚苯胺的自组装膜是一种良好的光电转换材料.     

The assessment of compliance with legal limits. Part 2. How to consider both type I and type II errors when working in the concentration domain

Considering the uncertainty of measurement when assessing compliance with reference values given in compositional specifications and statutory limits is still a controversial matter. In theory, assessing compliance requires considering both type I (false positive) and type II (false negative) errors. The more the concentration of the analyte in the sample under investigation is close to the allowed concentration limit, the more critical it is to consider both types of errors. This paper describes how this could be done. The matter is discussed in the light of the most recent literature information.     

Ion association in calcium phosphate solutions at 37°C

Ion association in the system Ca(OH)₂–H₃PO₄–KCl–H₂O at 37°C has been studied potentiometrically over a range of pH from 3 to 9. The experimental conditions were optimized for the accurate determination of the association constants for the formation of the ion pairs CaH₂PO ₄ ⁺ , CaHPO₄ and CaPO ₄ ^– which were found to be 27.9±0.1, 591±2, and (1.35±0.02)×10⁶ L-mol^–1, respectively.     

Solid-state,optical-rotation measurements on macromolecules using powder-suspensions

Summary We report techniques for measuring optical rotation of suspended solids, including dissymmetric molecular crystals (e.g. sodium chlorate and bromate), synthetic polymers, polypeptides and biopolymers. Examples include poly(triphenylmethyl methacrylate), poly-S-lactide, poly-L-hydroxyproline, hemocyanine, cellulose acetate andRNA. The results indicate that optical rotation measurements are sensitive to differences in secondary structure and can serve as a probe for structural differences between solid-state and solution.

---

Messung der optischen Rotation von Makromolekülen im Festzustand unter Verwendung von Pulversuspensionen

Zusammenfassung Es wird über eine Methode zur Messung der optischen Rotation von Festkörpern in Suspensionen berichtet, wobei dissymetrische Kristalle (z. B. Natriumchlorat und -bromat), synthetische Polymere, Polypeptide und Biopolymere behandelt werden. Die Beispiele umfassen Poly(triphenylmethylmethacrylat), Poly-S-lactid, Poly-L-hydroxyprolin, Hemocyanin, Celluloseacetat undRNA. Die Ergebnisse zeigen, daß die optischen Rotationen bezüglich Unterschiede in der Sekundärstruktur empfindlich sind und daß diese Messungen als ein Maß für Strukturunterschiede zwischen Festzustand und Lösung herangezogen werden können.

     

Novel rhenium(III) complexes with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine: X-ray structures and DFT calculations for [ReCl3(OPPh3)(dppt)] and [ReCl3(PPh3)(dppt)] complexes

The reaction of [ReOCl₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReCl₃(OPPh₃)(dppt)] has been obtained. The triphenylphosphine oxide can be easily replaced by PPh₃ in the reaction of [ReCl₃(OPPh₃)(dppt)] with an excess of triphenylphosphine. The [ReCl₃(OPPh₃)(dppt)] and [ReCl₃(PPh₃)(dppt)] complexes have been structurally and spectroscopically characterized. Their molecular orbital diagrams have been calculated with the density functional theory (DFT) method, and their electronic spectra have been discussed on the basis of time-dependent DFT calculations. The compound [ReCl₃(OPPh₃)(dppt)] has been studied additionally by magnetic measurement. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc

A coalesced high-intensity dc discharge is maintained between three cathodes and a single anode, stabilized by using resistors on each cathode leg. Jets of plasma gas are produced from either the cathode area or the anode area of the device. Cathode jets are generated by the self-induced pumping at the cathode tips and augmented by central gas injection. Arc voltage-current characteristics show classical convection-stabilized arc behavior. Anode heat transfer rates may be substantially increased by central gas injection toward the anode. Temperature fields in the coalesced, axially symmetric portion of the arc are determined spectrometrically and compared to those of a classical single-cathode free-burning arc.     

工作用玻璃液体温度计温度修正值的测量不确定度分析

依据JJF1059－1999，利用二等水银湿度计标准装置，分析了工作用玻璃液体温度计温度修正值的测量不确定度。当温度测量点为20℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.054℃，当温度测量点为95℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.055℃。     

Conformational studies of basic poly (α-amino acid)s in reversed micelles

The conformation of various basic poly (-amino acid)s was investigated by CD measurements in aqueous solutions containing bis (2-ethylhexyl)sodium sulfosuccinate (AOT) as well as in the AOT reversed micelles. The addition of AOT into an aqueous solution of poly(L-lysine) induces the conformational transition from coil to ordered structure, followed by aggregation. On the other hand, poly(L-lysine) assumes-structure in the reversed micelles at low w_ovalue (w_o=[H₂O]/[AOT]). Similarly to poly(L-lysine), poly(L-ornithine) takes an ordered structure in the aqueous solution containing AOT and-structure in the reversed micelles. In this case, however, these ordered structures are not so stable, compared with that of poly(L-lysine). Poly(L-arginine) undergoes the conformational transition from coil to helix by addition of AOT into the aqueous solution. Further addition of AOT allows transformation into-structure. Copoly(L-lysyl-L-leucine) with 63% leucine residue was shown to take a stable helical conformation even in pure water. In the reversed micelles, however, this ordered structure is significantly changed probably because the hydrophobic interaction among the leucyl residues is lowered in the reversed micelles.     

Determination of uncertainty for hardness measurement: proposal of the standard,available software

After the next revision of the ISO-standards for hardness testing (ISO 6506–6508) an estimation of the uncertainty (ISO/IEC 17025, ISO 5725) is mandatory. The two proposed approaches of part one (ISO 6506–6508) of the ISO Standards for hardness are exemplified. The calculation approach implemented in an Excel-based file, which is available via , is announced.Presented at the Metro Trade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, Germany