Microfabricated bioreactor chips for immobilised enzyme assays

A microfabricated device is reported that has been designed to permit the in situ packing of a section of channel with enzyme immobilised onto controlled pore glass (CPG). It is fabricated from glass and polydimethylsiloxane and to prevent dead volumes, has dedicated channels for packing the reactor. The device has the advantage of being simple in design, the flow through enzyme reactor channel being simply a widened section of the analyte channel. The system is suitable for both hydrodynamic and electro-osmotic pumping, and is designed such that when the packing is exhausted it can be repacked. Controlled pore glass provides a reproducible none swelling, high porosity medium onto which the enzyme could be immobilised. The large particle size meant that it was vital to optimise the immobilisation procedure in order to achieve acceptable enzyme activity. The microfabricated device was developed with two enzymes of different molecular masses; alkaline phosphatase and xanthine oxidase. The pore size of the CPG was found to be very important for xanthine oxidase, where the 697 Å pore size (120-200 mesh) CPG was found to give the highest activity (18-20% activity retained after immobilisation). The microfabricated device was used for the assay of p-nitrophenyl phosphate and hypoxanthine with spectrophotometric detection at 405 and 470 nm, respectively. The limits of detection were 5 and 8 μM, respectively.     

本征导电聚合物的智能性

在化学掺杂或电化学掺杂过程中，性质发生可逆性变化的本征导电聚合物是一种潜在的智能材料，可望实现或部分实现传感、处理和执竽功能，适于制成电机执行器、智能窗、化学分离与释放体系、传感器和非线性光学器件等。     

Organosoluble and transparent polyimides derived from alicyclic dianhydride and aromatic diamines

Organosoluble polyimides were synthesized with the alicyclic dianhydride 1,8‐dimethylbicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride and aromatic diamines. The polyimides possessed good solubility both in strong dipolar solvents and in common solvents; the thermal decomposition temperature of the polyimides exceeded 420 °C. Strong and flexible films of the polyimides, with the cutoff of ultraviolet–visible absorption lower than 310–320 nm, exhibited good features as the alignment layers for nematic liquid crystals with pretilt angles of 1.5–2.9°. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 110–119, 2002     

可移动式微量氧分析仪检定装置研制

研制一种新型可移动式微量氧分析仪检定装置。该装置由标准气体、零点气、脱氧纯化器、减压阀、调节阀、4通阀、5通阀、不锈钢管路、流量控制系统、移动平台等组成。该装置气密性好,15 min内可将装置内氧气浓度由20.9%降至不大于0.1μmol/mol,对于0~10μmol/mol的微量氧分析仪检定结果的扩展不确定度为Urel=1.7%FS(k=2)。该装置满足气体标准物质的连续切换和在线检定的需要,检定时间短,结果准确可靠,可为在线式和非在线式微量氧分析仪的量值溯源提供有效保障。     

Creation of highly functional thin films using electrochemical nanotechnology

This overview describes the results of our recent study of the application of electrochemical nanotechnology to the fabrication of magnetic recording materials, interconnects in ultra-large-scale integrated (ULSI) devices, energy storage materials, and on-chip biosensors. It is important to note that electrochemical processes play significant roles in developing and fabrication such sophisticated materials and devices. In the field of magnetic recording, electrodeposition methods for preparing CoNiFe and CoFe soft magnetic thin films with a high saturation magnetic flux density were newly developed, and the significant issues for obtaining those films are highlighted. In the area of ULSI interconnects, we developed a technique using a self-assembled monolayer (SAM) for direct bonding of the interconnect layer to SiO2, and proposed a novel electroless deposition method for fabricating a diffusion barrier layer. In the field of batteries, electrodeposited SnNi alloy was proposed as a future anode material for Li batteries, and electrochemical MEMS processes were shown to be useful for fabricating micro-sized direct methanol fuel cells (DMFCs) as portable batteries for electronics applications. In the area of chemical sensors, we developed a new process for fabricating field effect transistors (FETs) modified with SAMs for on-chip biosensing applications.     

Development of a miniature simultaneous MPT spectrometer

An unique miniature simultaneous microwave plasma torch (MPT) atomic emission spectrometer employing linear UV intensified charge-coupled device (ICCD) array detector has been developed and studied preliminarily. The detection limits and precisions of the spectrometer for Ag, Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Sr and V by using different CCD exposure times have been determined. An analysis of a practical sample has been carried out. The preliminary results demonstrate that such simultaneous spectrometer has advantages of saving sample and time, especially suitable for use as detector for chromatography and in combination with flow injection systems. Taking analytical figures of merit and portability into accounts, the miniature simultaneous MPT system will have extended application areas and greater competition potential as compared with commercialized scanning MPT spectrometers.     

聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶)与本征态聚苯胺的氢键自组装及其光电转换性能

合成了一种新的共聚体——聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶), 它含有吡啶环, 能作为氢受体与本征态聚苯胺进行氢键自组装. 在紫外光照下, 组装膜通过偶氮磺酸基的光解, 形成稳定的共价交联结构, 在电解质水溶液中也不被破坏, 可用作光电转换膜, 并能在盐水溶液中直接测定它的光电流. 结果表明含有本征态聚苯胺的自组装膜是一种良好的光电转换材料.     

Microdevices for manipulation and accumulation of micro- and nanoparticles by dielectrophoresis

Microfluidic devices with three-dimensional (3-D) arrays of microelectrodes embedded in microchannels have been developed to study dielectrophoretic forces acting on synthetic micro- and nanoparticles. In particular, so-called deflector structures were used to separate particles according to their size and to enable accumulation of a fraction of interest into a small sample volume for further analysis. Particle velocity within the microchannels was measured by video microscopy and the hydrodynamic friction forces exerted on deflected particles were determined according to Stokes law. These results lead to an absolute measure of the dielectrophoretic forces and allowed for a quantitative test of the underlying theory. In summary, the influence of channel height, particle size, buffer composition, electric field, strength and frequency on the dielectrophoretic force and the effectiveness of dielectrophoretic deflection structures were determined. For this purpose, microfluidic devices have been developed comprising pairs of electrodes extending into fluid channels on both top and bottom side of the microfluidic channels. Electrodes were aligned under angles varying from 0 to 75 degrees with respect to the direction of flow. Devices with channel height varying between 5 and 50 microm were manufactured. Fabrication involved a dedicated bonding technology using a mask aligner and UV-curing adhesive. Particles with radius ranging from 250 nm to 12 microm were injected into the channels using aqueous buffer solutions.     

一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。     

Determination of benzene, toluene, ethylbenzene and xylenes in air by solid phase micro-extraction/gas chromatography/mass spectrometry

The aim of the study was to analyse BTEX compounds (benzene, toluene, ethylbenzene, xylenes) in air by solid phase micro-extraction/gas chromatography/mass spectrometry (SPME/GC/MS), and this article presents the features of the calibration method proposed. Examples of real-world air analysis are given. Standard gaseous mixtures of BTEX in air were generated by dynamic dilution. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fibre exposed for 30 min to standard gas mixtures or to ambient air. The behaviour of the analytical response was studied from 0 to 65 g/m³ by adding increasing amounts of BTEX to the air matrix. Detection limits range from 0.05 to 0.1 g/m³ for benzene, depending on the fibre. Inter-fibre relative standard deviations (reproducibility) are larger than 18%, although the repeatability for an individual fibre is better than 10%. Therefore, each fibre should be considered to be a particular sampling device, and characterised individually depending on the required accuracy. Sampling indoor and outdoor air by SPME appears to be a suitable short-delay diagnostic method for volatile organic compounds, taking advantage of short sampling time and simplicity.