Calculation of the reactor neutron time of flight spectrum by convolution technique

It is a very complex and time-consuming process to simulate the nuclear reactor neutron spectrum from the reactor core to the export channel by applying a Monte Carlo program. This paper presents a new method to calculate the neutron spectrum by using the convolution technique which considers the channel transportation as a linear system and the transportation scattering as the response function. It also applies Monte Carlo Neutron and Photon Transport Code （MCNP） to simulate the response function numerically. With the application of convolution technique to calculate the spectrum distribution from the core to the channel, the process is then much more convenient only with the simple numerical integral numeration. This saves computer time and reduces some trouble in re-writing of the MCNP program.     

气源MBE外延自组装GeSi量子点光致荧光研究

利用气源分子束外延设备（MBE）制作了GeSi自组装量子点样品。利用原子力显微镜（AFM）和光致荧光（PL）光谱研究了量子点的形貌和光学性质。气源MBE在较低温度下生长的量子点材料具有较高的量子点覆盖度。200K以下载流子以局域激子形式束缚在量子点中,激子束缚能约为17meV。升温至200K,载流子的输运过程发生变化。对量子点PL积分强度与温度关系曲线进行拟合得到量子点中空穴跃迁至浸润层的热激活能为129meV。     

电力市场环境下计及V2G和多类型需求响应的综合能源系统多目标优化模型

园区综合能源系统(Park integrated energy system,PIES)是满足用户多种用能需求的一种重要途径,但由于内部分布式能源机组出力具有不确定性,且与负荷在时间维度上存在一定的不匹配性,限制了能源利用效率和经济效益的提升.因此,本文首先在构建耦合热电的PIES的基础上,构建了多类型需求响应模型;其...     

Superfast Responsive Ionic Hydrogels: Effect of the Monomer Concentration

A series of strong polyelectrolyte gels were prepared in aqueous solution, using the sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) as the monomer and N,N'‐methylene(bis)acrylamide (BAAm) as a crosslinker. The gels were both prepared below (?22°C) and above (25°C) the bulk freezing temperature of the water, producing cryogels and hydrogels, respectively. The crosslinker (BAAm) content was set at 17 mol%, while the initial monomer concentration C_o was varied over a wide range. It was found that, at ?22°C, a macroscopic network starts to form at an initial monomer concentration of as low as 0.1 w/v%. In contrast to the conventional hydrogels formed at 25°C, the cryogels have a discontinuous morphology consisting of polyhedral pores of sizes 10⁰–10² μm. The cryogels exhibit superfast swelling properties, as well as reversible swelling–deswelling cycles in water and acetone. An increase in the initial monomer concentration from 2.5 to 10% further increases the response rate of the cryogels due to the simultaneous increase of the porosity of the networks.     

pH-Responsive Phase Transition of Supramolecular Hydrogel Consisting of Glycosylated Amino Acetate and Carboxylic Acid Derivative

By addition of a carboxylated amino acetate (2) to a low-molecular-weight hydrogel (1) which has a unique thermally induced volume-phase transition character, a macroscopic pH-responsive feature is newly conferred on the supramolecular hydrogel. The direct observation of temperature-dependent behavior of the mixed hydrogel clearly showed that the thermally induced swelling-shrinkage type of the volume phase transition at pH 4 is shifted to the gel–sol transition at pH 7 by 10?mol% addition of 2 to the hydrogel 1. On the basis of the measurements by TEM, SEM, XRD and FT-IR, it is conceivable that incorporation of the anionic carboxylate of 2 slightly disturbs the packing of the hydrogen bond belt of the mixed hydrogel. Such a slight disturbance greatly leads to the sol–gel transition by elevating temperature, instead of the volume-phase transition. Introduction of dynamic characteristics to supramolecular systems in a macroscopic level may extend the potential of these materials in various fields.     

Efficient eco-friendly approach towards bimetallic nanoparticles synthesis and characterization using Exiguobacterium aestuarii by statistical optimization

ABSTRACT

Biogenic synthesis of bimetallic nanoparticles (gold – AuNp and selenium – SeNp) using inexpensive Tryptophan Enriched Banana Peel Media for the growth of marine isolate (Exiguobacterium aestuarii SBG4 MH185868). The response surface methodology is employed for optimizing production conditions. The surface plasmon resonance band showed λ_max at 540?nm (AuNp) and 284?nm (SeNp). FTIR and zeta potential analysis confirmed the stability, whereas XRD spectra revealed the nature of nanoparticles obtained at optimum conditions. SEM micrographs showed nanospheres of the following size: AuN, 30?±?5 nm and SeNp, 50?±?5 nm. Biocompatibility of Np evaluated by the hemolytic activity showed <20% hemolysis even at highest concentrations (100?µg/ml). AuNp showed the least cytotoxicity, whereas SeNp showed considerable cytotoxicity against the breast cancer cell lines MCF – 7 and MDA-MB-231. Hence, we utilized the environment-friendly growth media for the controlled synthesis of dual Np using single bacterial strain involving feasible steps in downstream processing.     

An analytical depth resolution function for the MRI model

The mixing roughness information depth model is frequently used for the quantification of sputter depth profiles. In general, the solution of the convolution integral for any kind of in‐depth distributions is achieved by numerical methods. For a thin delta layer, an analytical depth resolution function is presented, which enables a simple and user‐friendly quantification of measured delta layer profiles in AES, XPS and SIMS. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of Combined Effects of Xanthan Gum,Sodium Dodecyl Sulphate,and Salt on Some Physicochemical Properties of Their Mixtures Using a Response Surface Method

Aqueous solutions containing sodium dodecyl sulphate, xanthan gum, and salt were characterized by ionic conductivity, viscosity, and surface tension methods. A preliminary experimental study was performed to evaluate the effect of the mixture compositions on the surface behavior of the mixed polymer/surfactant systems under different solution conditions. An experimental design using response surface method (RSM) was then applied to assess factors interactions and empirical models regarding the physicochemical responses variables (i.e., conductivity, surface tension and viscosity). The main effects of the three independent factors: SDS concentration (x₁), NaCl concentration (x₂) and xanthan concentration (x₃) were determined using in particular a D-optimal design. The results show an important effect of the factors on responses; they also indicate that the synergetic action of surfactant, electrolyte and biopolymer greatly influences these properties. Analysis of variance (ANOVA) showed high variance coefficient (R ² Avarnas , A. and Panagiotis , I. ( 2003 ) J. Colloid Int. Sci. , 258 : 102 – 109 .[Crossref], [Web of Science ®] , [Google Scholar]) values, thus, ensuring a satisfactory adjustment of the second-order regression model with the experimental data.     

Analysis of Crude Oils by Frequency Domain Spectroscopy—Effect of Composition and Physical Properties on Conductivity and Dielectric Response

The dielectric properties and the composition of fourteen light to heavy crude oils have been analyzed. Frequency domain spectroscopy (FDS) has been used in order to determine their dielectric response in the frequency range 0.01 to 1000 Hz. For all the crude oils, over the whole frequency range under study, dielectric loss, ?″, shows a linear dependence of frequency indicating a pure direct current (DC) conductivity. As temperature is gradually increased, the dielectric loss, ?″, increases as well, showing a strong temperature dependence. The storage modulus, ?′, shows an explicit behaviour at low frequency that could be due to adsorption of oil components onto the electrodes. We tried to correlate some physical and chemical properties (density, viscosity, SARA, TAN, water content) of the studied crude oils with their conductivity measured at various temperatures. No correlation was found and different hypothesis are suggested by the authors to explain this phenomenon.     

Fast polarisation-insensitive optical shutter supported by backflow in dichroic dye-doped dual-frequency liquid crystal

This paper describes a novel implementation of a dual-frequency liquid crystal optical shutter of the guest–host type. The transmissive state of the filter is obtained by applying a low-frequency electric field that brings the dichroic dye in a homeotropic orientation. The light-absorbing state is realised by a twisted planar configuration for which the absorption is quasi-independent of the polarisation. Switching between the two states occurs in about 1 ms and the devices show no scattering for wavelengths inside or outside the absorption band of the dichroic dye. Simulations and experiments reveal how a twisted state is obtained through the backflow phenomenon.