On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

电感耦合等离子体发射光谱测定稀土铝合金中稀土和非稀土元素

本工作用 ICP-AES 法测定稀土-6063变形铝合金中 La、Ce、Pr、Nd、Sm、Gd、Fe、Mg、Ti、Zn,Cu 和 Mn,本方法不用化学分离,可一次同时测定这些元素,并做了 ICP光源参数、基体量变化、酸度(HCl)变化、稀土总量变化、共存元素 Fe 和 Mg 量的变化对被测元素的影响。本方法速度快、准确度高(除 Cu 稍差)。回收率91.0～110.0%,相对标准偏差±1.4～8.0%。     

盐酸浸提-电感耦合等离子体发射光谱法测定烟草中的多元素

研究了用5mol/L盐酸煮沸提取烟叶中的部分金属元素，用ICP－AES测定浸提液，K、Ca、Mg、Cu、B、Ba、Zn获得了较满意的结果，P、Fe、Mn的测定结果稍微偏低。此方法操作简便、快速安全，特别适合大批量烟草样的快速检测。与硝酸－高氯酸湿消化法进行对照，结果吻合得较好。并测定了国家烟草标准样品GBW08514和GBW08515，其结果与标准值相符。     

Determination of chloride ion in aqueous samples by isotope-dilution Fourier-transform flame infrared emission (ID-FIRE) spectrometry

An isotope dilution method for the determination of chloride ion in aqueous samples is described. The method makes use of the isotopic shift in the rotational lines of the 1–0 band of HCl emitted in the near infrared region of the spectrum by vibrationally excited HCl molecules present in a hydrogen/entrained air flame. Chloride ion in the sample is converted to chlorine gas by electrolysis and swept into a hydrogen/entrained air flame where it is converted into HCl. Because isotope dilution is an absolute method of analysis, matrix effects are minimized, and the chlorine generation step need not be quantitative. With the system described in this paper, samples must contain at least 9 mg of chloride ion per ml, and a 2-ml sample is required. Over the range from 10 to 30 mg Cl⁻ ml⁻¹, the average error was −0.96%, and the average relative standard deviation was 3.3% for seven samples using seven of the more intense lines in the P branch. Compared with standard silver nitrate titrations, the isotope dilution procedure was not affected by such common interferences as bromide ion and iodide ion. The technique was applied to several seawater samples from different regions.     

光谱实验室的建设和管理

阐述冶金、铸造等行业用于金属成分分析的直读发射光谱仪实验室的建设和管理。从仪器的调研、选型，实验室选址，基础设施设备的准备，仪器的安装、调试、验收、日常分析，实验室管理等几个方面，分别作了介绍。     

原子发射光谱分析

本文是《分析试验室》期刊单年度定期评述中关于原子发射光谱分析的第三篇综述文章。文中对１９９３－１９９４年期间我国在ＡＥＳ领域所取得的主要进展作了简要的评述。评述内容包括基础理论、应用研究、仪器研制、新方法建立以及一般样品分析。研究领域主要涉及到电感耦合等离子体原子发射光谱法，微波等离子体原子发射光谱法，电弧和火花原子发射光谱法，辉发放电原子发射光谱法和亚稳态能量转移光谱法等。引用文献２１１篇。     

透明导电玻璃(ITO)基材自加热传感静态芯片聚合酶链反应(PCR)

利用商品化ITO玻璃导电层的温阻效应, 无需任何微加工手段, 实现了自加热和传感的芯片温度自动程序控制, 最大程度地减小了传感滞后对温度控制稳定性的影响, 温度控制的稳定性达到了0.2 ℃, 升温速度最快可达20 ℃/s以上, 在冷却风扇辅助下降温速度最快达到了8 ℃/s. 芯片温控单元的引线从传统的两对(一对用于传感, 一对用于加热)减少为一对. 通过在该芯片上直接构建多个开放微池反应器的方法成功地实现了λDNA 157 bp片段的并行扩增. 将该芯片置于倒置荧光显微镜样品台上, 以蓝色(575 nm)发光二极管为光源, 以光电倍增管为检测手段检测了dsDNA和SYBR Green Ⅰ嵌合物的荧光强度随温度的实时变化曲线.     

Dialing in color with rare earth metals: facile photoluminescent production of true white light

Combining polymeric architectures with metal ions produces hybrid materials with extremely rich properties. We are studying polymers containing terpyridine in the side chain. In this report, the chelation of lanthanide ions, Eu³⁺, Tb³⁺, and Dy³⁺ resulted in metal functionalized copolymers that exhibited excellent emission of red, green, and blue light respectively. The polymer architecture easily allows incorporation of all three colors into the material, which leads to the facile production of true white light in solution or the solid state. Quantum efficiencies for the polymer systems were determined. The white light system had an efficiency of 5%. Various combinations of colors were achieved from the basic RBG colors by simply varying the metal ion ratios in the polymer backbone. This easy tuning of the color makes these systems attractive. Copyright © 2007 John Wiley & Sons, Ltd.     

助熔剂对Y3Al5O12：Ce荧光粉性能的影响

在还原气氛下采用高温固相反应法合成了白光LED用黄色荧光粉Y3Al5O12:Ce(YAG:Ce)研究了助熔剂对YAG：Ce荧光粉发光特性的影响，。XRD的测量结果表明加入合适的助熔剂有利于YAG:Ce荧光粉的晶化，并且不引入杂相，选择BaF2和H3BO3同时使用效果要好于单独使用一种助熔剂，助熔剂的加入可增大YAG：Ce荧光粉的激发和发射光谱强度，并能有效降低荧光粉的中心粒径（D50）控制粉体的粒径分布，适用于白光LED的制造。     

原子发射光谱法间接测定黄连素片剂中盐酸小檗碱的研究

本文提出了离子对-原子发射光谱间接测定黄连素片剂中盐酸小檗碱的新方法。发现用1,2-二氯乙烷作萃取剂效果最佳。用此怯测定实际样品的结果与药典法一致,相对误差为0.61％,单一测定的相对标准偏差为0.67％。本法还可在盐酸普鲁卡因共存下单独测定盐酸小檗碱。方法可靠、适用,选择性较好。