掺杂对碳纳米管拉曼光谱及场发射性能的影响

采用高温热解法在860℃分别制备出了镓、氮以及硼和氮掺杂的碳纳米管,提纯后利用丝网印刷工艺分别将它们制备成薄膜,并测试了它们的拉曼光谱与场发射性能。测试结果表明,掺杂纳米管的缺陷密集度比纯碳纳米管明显增大,而它们的场致电子发射性能则与掺杂元素的性质密切相关。镓和氮掺杂的纳米管均具有非常优异的场发射性能,而硼和氮共掺杂的纳米管的场发射性能很差。掺杂引起碳纳米管费米能级附近能态密度的变化及功函数的降低是其具有优异场致电子发射性能的主要原因。     

纳米晶ZrO2:Er3+-Yb3+的制备及其室温上转换发射

用化学共沉淀法制备了ZrO₂:Er³⁺-Yb³⁺纳米晶粉体，所制备的纳米晶粉体具有较强的室温上转换发射和红外发射.研究了样品的晶体结构和上转换发光性质随着Yb³⁺掺杂浓度和煅烧温度的变化关系.通过X射线衍射谱分析发现，经800℃煅烧2h后得到的ZrO₂:Er³⁺-Yb³⁺纳米晶是四方相和单斜相的混合结构，经950℃煅烧2h后得到的样品以单斜相为主，随着Y     

掺杂Er^3＋的TiO2的发射光谱研究

用无水乙醇、冰醋酸、钛酸丁酯凝胶法制备了掺杂Er^3＋的TiO2粉末，测量了其在488m激发下的Stokes发射光谱和980nm激发下的上转换发光光谱。在可见光范围内，观察到了绿光和红光，绿光从500-570nm，对应Er^3＋的^2H11/2,^4S3／2→^4I15/2，红光从650～690m，对应Er^3＋的^4F9／2→^4I15／2的跃迁。由ln Ivis-In Iin曲线可知，绿光和红光均为双光子过程，光强正比于泵浦功率的二次方，即Iout ∝Iin。初步研究了此材料的上转换过程。     

低速高电荷态离子40Ar16+与云母表面作用中的电子发射研究

报道了由兰州ECR源提供的低速高电荷离子40Ar16 入射到云母表面产生的电子发射的实验测量结果.结果发现,电子发射产额Y与离子入射角ψ有近似1/tanψ的关系.基于经典过垒模型,我们对这一关系进行了理论分析.实验结果和理论结果相当符合,这就间接说明势能电子发射是低速高电荷态离子作用于表面发射电子的一个主要途径.     

二维光子晶体中极化原子自发辐射的开关效应

利用二维光子晶体的各向异性，结合原子的偶极辐射能量分布特点，提出通过改变原子的极化方向，可以使其自发辐射寿命显著地缩短或者延长，实现开关控制．发现在某些空间位置上，极化原子寿命的改变可高达33倍．     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Spectroscopy of the regenerative soot

The mechanisms and processes of the formation of the regenerative soot in a graphite hollow cathode discharge that produces and emits carbon clusters are presented. Mass spectrometry with a specially designed E×B velocity filter analyzes the entire range of the charged clusters from C ₁ to ∼C ₄₃₀₀. The state of the carbon vapour within the source is evaluated by using the characteristic line emissions from the carbonaceous discharge whose formative mechanisms depend upon the kinetic and potential sputtering of the sooted cathode. The carbonaceous discharge generates atomic and ionic C and its clusters C _m (m≥ 2), noble gas metastable atoms and ions, energetic electrons and photons in the cavity of the graphite hollow cathode. The parameters of soot formation and its recycling depend critically on the discharge parameters, the geometry of the hollow cathode and 3D profile of the cusp magnetic field contours. Received 2nd July 2001 and Received in final form 10 September 2001     

Physical Analysis of a Possibility to Reach the 1.30-μm Emission from the GaAs-Based VCSELs with the InGaAs/GaAs Quantum-Well Active Regions and the Intentionally Detuned Optical Cavities

Physical aspects of an operation of the GaAs-based InGaAs/GaAs quantum-well (QW) VCSELs with the intentionally detuned optical cavities have been considered in the present paper using the comprehensive three-dimensional self-consistent optical–electrical–thermal-gain simulation. In GaAs-based structures, very good DBR resonator mirrors and a very efficient methods to confine radially both the current spreading and the electromagnetic field with the aid of oxide apertures may be applied. It has been found using the above simulation that even currently available immature technology enables manufacturing the above devices emitting radiation of wavelengths over 1.20 μm. In particular, while the room-temperature 1.30-μm lasing emission is still beyond possibilities of the InGaAs/GaAs QW VCSELs, these structures may offer analogous 1.25-μm emission, especially for the high-power and/or high-temperature operation.     

Effects of UV photon irradiation on SiOx (0 < x < 2) structural properties

Thin films of a-SiO_x (0 < x < 2) were prepared by reactive r.f. magnetron sputtering from a polycrystalline-silicon target in an Ar/O₂ gas mixture. The oxygen partial pressure in the deposition chamber was varied so as to obtain films with different values of x. The plasma was monitored, during depositions, by optical emission spectroscopy (OES) system. Energy dispersive X-ray (EDX) measurements and infra-red (IR) spectroscopy were used to study the compositional and structural properties of the deposited layers.Structural modifications of SiO_x thin films have been induced by UV photons’ bombardment (wavelength of 248 nm) using a pulsed laser. IR spectroscopy and X-ray photoemission spectroscopy (XPS) were used to investigate the structural changes as a function of x value and incident energy. SiO_x phase separation by spinodal decomposition was revealed. The IR peak position shifted towards high wavenumber values when the laser energy is increased. Values corresponding to the SiO₂ material (only Si⁴⁺) have been found for laser irradiated samples, independently on the original x value. The phase separation process has a threshold energy that is in agreement with theoretical values calculated for the dissociation energy of the investigated material.For high values of the laser energy, crystalline silicon embedded in oxygen-rich silicon oxide was revealed by Raman spectroscopy.     

Fermi能区核－核碰撞的平衡前中子发射

利用ＢＵＵ模型模拟核－核碰撞３６Ａｒ＋１０８Ａｇ（３５Ｍｅｖ／ｕ）、１４Ｎ＋１０８Ａｇ（３５ＭｅＶ／ｕ）中的平衡前中子发射．模拟结果与唯象的运动源拟合给出的中等速度源成份相吻合．这说明中等速度源成份产生于核－核碰撞的早期，对应平衡前发射．并从级联碰撞的角度定量地研究了平衡前发射的持续时间