微波等离子体炬发射光谱法去溶系统性能的研究

用微波等离子体矩（MPT）作激发光源，等离子体的工作气体为氩气，研究了气动雾化进样去溶系统的工作参数对分析性能的影响，探讨了水冷凝与浓硫酸吸收二者协同去溶的相关性，结果表明，OH （Q1带，带头谱线为308.520nm）的发射强度即可判别样品去溶效果。     

π-CONJUGATED OLIGOMERS IN SUPRAMOLECULAR CRYSTALS AND THEIR OPTOELECTRONIC FUNCTIONS

Functional organic molecular materials and conjugated oligomers or polymers now allow the low-cost fabrication of thin films for insertion into new generations of electronic and optoelectronic devices. The performance of these devices relies on the understanding and optimization of several complementary processes. Our goal is to discuss the relationship between the molecular stacking structures and their optoelectronic properties that are of importance in all these areas. The concept of intermolecular interaction should be taken here in the special sense that is inter-dipole coupling. Specifically, we will address the impact of inter-dipole interaction between adjacent molecules in aggregate state on the solid-state emission properties.     

碳纳米管在接枝二元胺过程中微结构的变化

通过对酸化的多壁碳纳米管(MWNTs)进行酰氯化, 在碳纳米管表面接枝己二胺. 用红外光谱、热重分析、拉曼光谱和场发射扫描电镜对处理前后的碳纳米管进行分析表征. 结果表明, 经过酰氯活化, 己二胺比较容易被接枝到碳纳米管上. 而且还发现碳纳米管在酸化后形成紧密块状结构, 在接枝胺后重新变得蓬松, 其表观比容甚至大于原始碳纳米管. 从理论上分析了碳纳米管的反应过程, 对碳纳米管在接枝胺过程中微结构的变化机理进行推测, 认为通过接枝, 己二胺插入碳纳米管之间, 改变了碳纳米管之间的相互作用, 使得酸化后因形成氢键而导致的紧密堆砌结构被破坏.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

Sr／Ca比变化对红色荧光粉Ca1-xSrxS：Eu^2＋的影响

在CO气氛下采用固相反应法合成了发红光的Ca1-xSrxS:Eu^2 荧光粉，研究了基质阳离子Sr／Ca比变化对其晶体性质及发光性能的影响。结果表明，随着Sr／Ca比的减少，荧光粉的晶胞参数逐渐降低；同时，由于受电子云膨胀效应和晶体场影响，发射主峰向长波方向移动，红色比逐渐增大，色纯度提高。     

Influence of substrate morphology on organic layer growth: PTCDA on Ag(1 1 1)

By UV-excited photoelectron emission microscopy (UV-PEEM) we investigated the microscopic growth behavior of organic thin films using 3,4,9,10-perylene-tetracarboxylicacid dianhydride (PTCDA) on a Ag(1 1 1) single crystal substrate as example. Direct, real time observation allows to correlate the initial growth modes and the related kinetic parameters with substrate properties like terrace width, step density, and step bunches from the submonolayer range up to 5 layers or more. Above room temperature PTCDA grows in a Stranski–Krastanov fashion: after completion of the first two stable layers three-dimensional islands are formed. The nucleation density strongly depends on the temperature and the substrate morphology thus affecting the properties of the organic film.     

Intramolecular energy transfer in actinide complexes of 6-methyl-2-(2-pyridyl)-benzimidazole (biz): comparison between Cm and Tb systems

Coordination of the 6-methyl-2-(2-pyridyl)-benzimidazole ligand with actinide and lanthanide species can produce enhanced emission due to increased efficiency of intramolecular energy transfer to metal centers. A comparison between the curium and terbium systems indicates that the position of the ligand's triplet state is critical for the enhanced emission. The energy gap between the ligand's triplet state and the acceptor level in curium is about 1000 cm⁻¹, as compared to a ~600 cm⁻¹ gap in the terbium system. Due to the larger gap, the back transfer with curium is reduced and the radiative yield is significantly higher. The quantum yield for this “sensitized” emission increases to 6.2%, compared to the 0.26% value attained for the metal centered excitation prior to ligand addition. In the terbium case, the smaller donor/acceptor gap enhances back transfer and the energy transfer is less efficient than with the curium system.     

电感耦合等离子体原子发射光谱专家系统中谱线激发模型

阐述了ＩＣＰ－ＡＥＳ专家系统中ＡＥＳ电离和激发模型的基本原理，研究了模拟中应用ｎｏｎ－ＬＴＥ理论的正确性以及所需的支持数据库。利用Ｂｏｌｔｚｍａｎｎ曲线，讨论了Ｂｏｌｔｚｍａｎｎ温度的测量值随能级激发能变化的现象，并与类似条件下的经验Ｂｏｌｔｚｍａｎｎ曲线进行对比，证明了专家系统中ＡＥＳ电脑和激发模型可靠性。     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Synthesis and Opto-Electronic Properties of Cholesteric Cellulose Esters

Cholesteric materials display unique optical properties which can be exploited in opto-electronic applications such as light emitting diodes. The key feature is the position of the wavelength of the emitted light relative to the one of the selective reflection band. We have synthesized a set of cellulose derivatives displaying the cholesteric phase with the aim to investigate the correlation between chemical structure and properties. Phase transition temperatures, the chain packing, the wavelength of selective reflection but also absorption and fluorescence spectra were investigated as a function of the degree of substitution (DS), the nature of lateral substituents, the composition of doped systems and blends of different cellulose derivatives. Investigated were furthermore the degree of circular polarization of the emitted light for guest–host systems and for cellulose systems with chromophores linked by covalent bonds to the cellulose backbone as well as their performance in light emitting diodes. The conclusion is that the optical properties can be accounted for on the basis of the model of a one-dimensional photonic crystal. The limiting factor with respect to opto-electronic applications is the poor control of the uniformity of the helix formation and orientation.