Effect of silver doping on the structure and phase separation of sulfur-rich As–S glasses: Raman and SEM studies

We report on the structural details and microphase separation of the bulk glasses Ag_x·(As₃₃S₆₇)_100-x for 0x25. Glass–glass phase separation occurs over a wide range of Ag content, i.e. 4x20. An off-resonant polarized Raman spectroscopic study has been carried out to elucidate structural aspects at the short- and medium-range structural order of the glasses. Analysis of Raman spectra revealed quantitative changes of the sulfur-rich microenvironments that reduce upon adding Ag. Scanning electron microscopy combined with X-rays microanalysis have been utilized to examine the type and extent of phase separation, and to provide quantitative details on the atomic concentrations in the Ag-poor and Ag-rich phases. It has been shown that at 7 at.% Ag the Ag-rich phase percolates through the structure; this effect can be associated with an ionic-to-superionic behavior of these glasses in accordance with similar studies on the stoichiometric arsenic sulfide glass; although the phase separation observed in the present glasses is qualitatively different.     

Zn-Mg合金的结构分析和Zn-Mg扩散体系的物相分布

分子动力学(MD)模拟常采用径向分布函数(RDF)、Honeycutt-Anderson (HA)键型指数法、原子团类型指数法(CTIM)表征物相的微观结构. 本文依据CTIM 理论, 对CTIM 进一步发展, 使CTIM 不仅能够表征bcc\fcc\hcp\非晶体, 也能表征其它晶系的晶体结构. 本文采用CTIM 完成Zn-Mg 合金标准晶体的结构表征和Zn-Mg扩散体系物相分布的分析. 结果表明: 合金组元的CTIM指数不仅反映了Mg₂₁Zn₂₅、MgZn₂、Mg₂Zn₁₁晶体结构的差异, 也说明了Mg₄Zn₇、MgZn₂晶体结构十分相近. Zn-Mg扩散体系两步法模拟后, 体系两端交替分布着hcp 与fcc 结构; 体系中部形成大量的非晶体; Zn原子端交替分布着hcp 与fcc 结构的界面区域主要是Zn12-C类原子.     

Charge Transfer and Chemical Hardness along a Substitution Path in Metastable Au‐Sb Alloys

In the present study the synthesis of metastable alloys of the noble metal Au and the semimetal Sb is realized by using high pressure techniques. The influence of Au on bulk Sb is shown experimentally by stepwise substitution. In addition to the effect of the most electronegative noble metal on Pauling's scale in the binary Au‐Sb phases, some ternary compounds with In, Sn, As, and Te in addition to Au and Sb are discussed. The experiments are planned to obtain a better knowledge on the reasons for building up a simple cubic Sb partial lattice, and their crystallographic results are used to construct model structures for new electronic structure calculations from first principles on the metastable π‐phases. Using the LCAO‐CO ansatz and density‐functional methods, we study total energies, band structures, densities of states and charge transfer properties according to Bader's method by integrating zero flux surfaces. Finally, from electronic band structure analysis, the quantities “chemical potential” μ, and “chemical hardness”, η, are derived according to the original ideas of Pearson and Parr and are applied to solid state problems using special points of the Brillouin zones within a band structure approximation for the first time. The results are shown to support the experimental findings about the substitution path within the system Au‐Sb.     

The Zintl Phase Eu2Si

The Zintl phase Eu₂Si was synthesized from elemental europium and silicon in a sealed tantalum tube in a high‐frequency furnace at 1270 K and subsequent annealing at 970 K. Investigation of the sample by X‐ray powder and single crystal techniques revealed: Co₂Si (anti‐PbCl₂) type, space group Pnma, a = 783.0(1), b = 504.71(9), c = 937.8(1) pm, wR2 = 0.1193, 459 F² values and 20 variables. The structure contains two europium and one silicon site. ¹⁵¹Eu Mössbauer spectroscopic data show a single signal at an isomer shift of −9.63(3) mm/s, compatible with divalent europium. Within the Zintl concept electron counting can be written as (2Eu²⁺)⁴⁺Si⁴⁻, in agreement with the absence of Si‐Si bonding. Each silicon atom has nine europium neighbors in the form of a tri‐capped trigonal prism. The silicon coordinations of the Zintl phases Eu₂Si, Eu₅Si₃, EuSi, and EuSi₂ are compared.     

Preparation and porous control of amorphous carbons by co-defluorination of perfluorooctane and octafluorotoluene in vapor phases at 423 K

Two types of perfluorocarbon compounds, aliphatic perfluorooctane and aromatic octafluorotoluene, were co-defluorinated using sodium metal, and amorphous carbons were deposited from the vapor phase at very low temperature, 423 K. The products showed morphologies composed of fibrous, platelet, and spherical forms, which were dependent on the mixing ratio of the two. The BET surface areas also correlated well with the ratio of the starting mixtures, indicating that the surface area could be adjusted by changing the mixing ratio of these two compounds. However, when the carbonaceous product was further annealed in situ at 573 or 673 K, the porosities also modified. First the porosity decreased at 573 K, then increased greatly at 673 K, where radical interaction to shrink the pores and crystal growth of template fluoride occurred at 573 K and 673 K, respectively.     

Simulating the fourth-order interference phenomenon of anyons with photon pairs

The generalized Hong-Ou-Mandel interferometer with anyons is studied. Novel interference results different from bosons or fermions are found. An experimental scheme based on linear optics is proposed and realized to simulate the fourth-order interference phenomenon of anyons.     

毛细管电色谱中固定相的选择以及固定相粒度对柱效的影响

研究了以3μm、3μmC8、3μmPH、3μmCN、3μmSi等填充料为填充柱的毛细管电色谱法的对硫脲、苯甲醇、苯甲醛和萘的分离度。结果表明，填充料的粒度越小，柱效越高。     

Investigating the Role of Vacancies on the Thermoelectric Properties of EuCuSb-Eu2ZnSb2 Alloys

AMX compounds with the ZrBeSi structure tolerate a vacancy concentration of up to 50 % on the M-site in the planar MX-layers. Here, we investigate the impact of vacancies on the thermal and electronic properties across the full EuCu_1−xZn_0.5xSb solid solution. The transition from a fully-occupied honeycomb layer (EuCuSb) to one with a quarter of the atoms missing (EuZn_0.5Sb) leads to non-linear bond expansion in the honeycomb layer, increasing atomic displacement parameters on the M and Sb-sites, and significant lattice softening. This, combined with a rapid increase in point defect scattering, causes the lattice thermal conductivity to decrease from 3 to 0.5 W mK⁻¹ at 300 K. The effect of vacancies on the electronic properties is more nuanced; we see a small increase in effective mass, large increase in band gap, and decrease in carrier concentration. Ultimately, the maximum zT increases from 0.09 to 0.7 as we go from EuCuSb to EuZn_0.5Sb.     

H+−H− Pairs in Partially Oxidized MAX Phases for Bifunctional Catalytic Conversion of Furfurals into Linear Ketones

Currently, less favorable C=O hydrogenation and weak concerted acid catalysis cause unsatisfactory catalytic performance in the upgrading of biomass-derived furfurals (i.e., furfural, 5-methyl furfural, and 5-hydroxymethyl furfural) to ketones (i.e., cyclopentanone, 2,5-hexanedione, and 1-hydroxyl-2,5-hexanedione). A series of partially oxidized MAX phase (i.e., Ti₃AlC₂, Ti₂AlC, Ti₃SiC₂) supporting Pd catalysts were fabricated, which showed high catalytic activity; Pd/Ti₃AlC₂ in particular displayed high performance for conversion of furfurals into targeted ketones. Detailed studies of the catalytic mechanism confirm that in situ hydrogen spillover generates Frustrated Lewis H⁺−H⁻ pairs, which not only act as the hydrogenation sites for selective C=O hydrogenation but also provide acid sites for ring opening. The close intimate hydrogenation and acid sites promote bifunctional catalytic reactions, substantially reducing the reported minimum reaction temperature of various furfurals by at least 30–60 °C.