大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

多自由度测试技术的发展

介绍目前较常用的多种多自由度测试技术，给出每种测试技术的测试原理和应用场合，比较各种技术的优缺点和适用范围，讨论该技术发展的方向。     

Numerical reconstruction of an infrared wavefront utilizing an optical phase modulation device

We utilize nitroanisole, that absorbs infrared (IR) radiation as heat, as an optical modulation device based on a thermal process. The nitroanisole exhibits a thermal lens effect, i.e. a temperature dependent refractive index. Hence, the nitroanisole can induce phase modulation to visible light, in direct response to intensity of the incident IR radiation. The proposed method can be used to obtain the phase modulation distribution that corresponds to the IR intensity distribution, i.e. the IR hologram itself, on the nitroanisole by examining the phase map of visible light that is modulated upon passing through the nitroanisole. The IR wavefront can be reconstructed by calculating extracted IR holograms through the Fresnel transform. It is verified that both the amplitude and the phase of the IR wavefront can be reconstructed accurately by proposed method.     

高精度CCD尺寸自动检测系统的光学系统设计

介绍测量精度为±０．００３ｍｍ的ＣＣＤ尺寸检测系统的光学系统设计特点及远心物镜设计原理，并给出了测试结果。     

抽样调查中最佳测量次数的确定

现场抽样调查中，由于测量误差的存在，使得所测变量实测值的方差增大，通过增加每个体的测量次数可以控制测量误差，但这样每个体调查费用增大。本文对测量信度Ｒ，每个体测量次数ｍ与相应所需的样本含量ｎｍ、调查费用Ｔｎ的关系进行了探讨，并介绍了如何根据Ｒ，及每个体测量费用占其总费用构成比Ｃ，确定最佳测量次数ｍ值，以达到最佳控制调查费用的目的，这对我们在大型现场调查中进行经济效益分析具有重大的理论指导意义。     

三羟甲基甲胺、季戊四醇及其二元体系固-固相变的变温红外光谱研究

利用傅里叶变温红外光谱仪分别测定了三羟甲基甲胺（TAM）、季戊四醇（PE）及其二元体系变温红外谱。实验表明，多元醇分子中羟基吸收峰随温度升高耐发生位移向高波数移动，此结果既能反映多元醇及其二体系固－固相变的温度区间，又与转变热相对应，从而揭示了多元醇及其二元体系固－固相变贮热的机理。     

Making equation of state models predictive: Part 2: An improved PCP-SAFT equation of state

We use the PCP-SAFT equation of state, which is of the Van der Waals type and has a sound physical basis, to predict mixture properties, such as vapor–liquid and liquid–liquid equilibria, as well as excess enthalpies. We use molecular properties, such as dipole moment, quadrupole moment, polarizability and dispersion interaction coefficients, that have been determined quantum mechanically in Part I of this publication and adjust the remaining three pure compound parameters to pure compound data. We finally present a new combination rule for the dispersion energy parameter ? that is based on the quantum mechanically determined data. The predictions based on quantum mechanically determined pure compound properties along with the new combination rule show an improved performance compared to the original PCP-SAFT combination rule.     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Extension of the range of resonator scanning spectrometer into submillimeter band and some perspectives of its further developments

Extension of the working frequency of modern resonator spectrometers into submillimeter wave range is described. Experimental record of atmospheric absorption spectrum covering 45-370 GHz range is demonstrated for the first time, and measured water vapor J′_{ka′, kc′}-J_{ka, kc} = 5_1,5-4_2,2 at 325 GHz line parameters are presented. For the first time pressure lineshift for the 325-GHz water vapor line is measured. Further extension of working range is discussed. New estimations of physical limits of time needed for measurements of absorption in the whole Backward Wave Oscillator (BWO) range are given for phase continuous synthesizer regime. Basic schemes of fast broadband continuous phase synthesized sources are discussed. Verification of the previous measurements of water vapor 3_1,3-2_2,0 at 183 GHz line parameters is presented. Comparisons with ringdown resonator spectrometers are given.     

On bulk-service MAP/PH L,N /1/N G-Queues with repeated attempts

We consider a retrial queue with a finite buffer of size N, with arrivals of ordinary units and of negative units (which cancel one ordinary unit), both assumed to be Markovian arrival processes. The service requirements are of phase type. In addition, a PH^L,N bulk service discipline is assumed. This means that the units are served in groups of size at least L, where 1≤ L≤ N. If at the completion of a service fewer than L units are present at the buffer, the server switches off and waits until the buffer length reaches the threshold L. Then it switches on and initiates service for such a group of units. On the contrary, if at the completion of a service L or more units are present at the buffer, all units enter service as a group. Units arriving when the buffer is full are not lost, but they join a group of unsatisfied units called “orbit”. Our interest is in the continuous-time Markov chain describing the state of the queue at arbitrary times, which constitutes a level dependent quasi-birth-and-death process. We start by analyzing a simplified version of our queueing model, which is amenable to numerical calculation and is based on spatially homogeneous quasi-birth-and-death processes. This leads to modified matrix-geometric formulas that reveal the basic qualitative properties of our algorithmic approach for computing performance measures. AMS Subject Classification: Primary 60K25 Secondary 68M20 90B22.