On the calculation of a limit for infinite systems from data on finite systems

We propose a mathematical model for the calculation of physical or chemical properties of infinite polymers, based on data for structurally closely related finite molecules. The modelling is phenomenological but permits a physical interpretation of the parameters involved in the equations. Received: 11 June 1996 / Accepted: 5 June 1997     

侧链含自由基单元的1,4-吡咯并吡咯二酮共轭聚合物的合成和半导体性质研究

合成了两个侧链含有2,2,6,6-四甲基哌啶-1-氧自由基单元(TEMPO)的1,4-吡咯并吡咯二酮(DPP)共轭聚合物PDPP4T-1和PDPP4T-2,并开展了其半导体性质研究。薄膜场效应晶体管器件测试结果显示,相对于不含TEMPO的聚合物PDPP4T,PDPP4T-1和PDPP4T-2的场效应器件性能有所降低,不过,含TEMPO的聚合物器件性能最高仍达到了2.12cm~2·V~(-1)·s~(-1)。进一步通过原子力显微镜和X射线衍射对TEMPO引入后导致性能降低的可能原因进行了研究。     

Fluorinated organic chemicals: Prospects in New Electrochemical Energy Technologies

This contribution has been partly adapted from a special lecture intended to commemorate the Nobel prize, awarded one century ago, to Henri Moissan. It, is focused on fluorinated and perfluorinated molecules and macromolecules used in electrochemical energy sources, i.e. storage and conversion of energy. The latter, which figure indisputably among New Energy Technologies, include lithium batteries and fuel cells based on polymeric membranes both of which have tremendous development potential in terms of performances, safety and cost reductions. The advantages inherent in fluorine, in particular its electron-withdrawing effect and the oxidation stability that it provides to the carbon-fluorine bond, make it an asset in the search for new organic molecular and macromolecular anions with extensive delocalization of the negative charge, usable both in lithium batteries and fuel cells. As for fluorinated and perfluorinated macromolecule backbones, they are currently the reference material in fuel cell ionomeric membranes but some of them are also good candidates for use in lithium-ion batteries. This paper, far from being exhaustive, also emphasizes the economic aspects that influence material selection and also govern the future of basic research.     

Nitrogen Dioxide Sensing Properties and Mechanism of Copper Phthalocyanine Film

Copper phthalocyanine film, a p-type organic semiconductor, is synthesized by vacuum sublimation and its surface morphology is characterized by SEM. A silicon-based copper phthalocyanine film gas sensor for NO2 detection is fabricated by MEMS technology. The results show that the resistance and sensitivity of copper phthalocyanine film decrease obviously as the NO2 concentration increases from Oppm to lOOppm. However, the sensitivity nearly keeps a constant of O. 158 between 30 ppm and 70 ppm. The best working temperature of the gas sensor is 90℃ for NO2 gas concentrations of lOppm, 20ppm and 30ppm, which is much lower than that of general metal oxide gas sensor.     

Determination of P-Cresol (and Other Phenolics) Using a Conducting Polymer Based Electro-Immunological Sensing System

Abstract

Antibodies to a p-cresol bovine serum albumin conjugate have been produced and incorporated into a conducting polymer to form an electro-immunological sensing system. Using flow injection analysis and pulsed electrochemical detection sensitive, reproducible and rapid responses to p-cresol and other phenolics can be obtained. The sensor is reusable.     

Synthesis,Characterization and Fluorescent Properties of Three One‐Dimensional Coordination Polymers Derived from Polypyridyl Ligands

Three one‐dimensional coordination polymers, [MnCl₂(4‐pyterpy)]∙2CHCl₃ ( 1 ), [Mn(NO₃)₂(4‐pyterpy)]∙CHCl₃ ( 2 ) and [Ag(NO₃)(3‐pyterpy)]∙H₂O ( 3 ) (4‐pyterpy = 4′‐(4‐pyridyl)‐2,2′:6′,2″‐terpyridine and 3‐pyterpy = 4′‐(3‐pyridyl)‐2,2′:6′,2″‐terpyridine) were synthesized and characterized by X‐ray diffraction. All three compounds exhibit a rare “head‐to‐tail” coordination of the multidentate ligand, but differ significantly in their polymer chain conformations. Additionally, the fluorescent properties of all three compounds were investigated and show a weak, ligand‐centered fluorescence at 416–418 nm.     

Solvent and temperature-dependent conductive behavior of poly(3-hexylthiophene)

Impedance characterization at different temperatures has been used to investigate the conductive behavior of Poly(3-hexylthiophene) (P3HT), prepared in different solvents, as the semiconductor layer in organic multilayer capacitor. It has been found that the P3HT films using chloroform and toluene solvents exhibit an enhancement in conductivity by heating following an Arrhenius law with an activation energy transition from 0.004 to 0.026 eV and from 0.002 to 0.015 eV at ~313 K, respectively, which originates from band tail hopping that occurs around the Fermi edge. The boiling point of the used solvents can affect P3HT crystallization process, which causes the difference in conduction and activation energy.     

Self-assembly and characterization of Ca-Al-LDH nanohybrids containing casein proteins as guest anions

Casein, a natural biopolymer contained in milk, has been successfully intercalated into a Ca-Al-LDH host structure. Synthesis was performed by rehydration of tricalcium aluminate in the presence of casein. The resulting nanohybrids were characterized by powder X-ray diffraction (XRD), elemental analysis, infrared spectroscopy (IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Further experiments revealed that the single protein strains intercalate instead of the entire casein sub micelles, which are present in milk. Additionally, the pure phospho protein fractions α- and β-casein, which make up ∼80 wt% of total casein were isolated and intercalated into the Ca-Al-LDH host structure, yielding a biopolymer-inorganic hybrid material.