Hydroxylation-induced modifications of the Al2O3/NiAl(0 0 1) surface at low water vapour pressure

STM, STS, LEED and XPS data for crystalline θ-Al₂O₃ and non-crystalline Al₂O₃ ultra-thin films grown on NiAl(0 0 1) at 1025 K and exposed to water vapour at low pressure (1 × 10⁻⁷-1 × 10⁻⁵ mbar) and room temperature are reported. Water dissociation is observed at low pressure. This reactivity is assigned to the presence of a high density of coordinatively unsaturated cationic sites at the surface of the oxide film. The hydroxyl/hydroxide groups cannot be directly identify by their XPS binding energy, which is interpreted as resulting from the high BE positions of the oxide anions (O_1s signal at 532.5-532.8 eV). However the XPS intensities give evidence of an uptake of oxygen accompanied by an increase of the surface coverage by Al³⁺ cations, and a decrease of the concentration in metallic Al at the alloy interface. A value of ∼2 for the oxygen to aluminium ions surface concentration ratio indicates the formation of an oxy-hydroxide (AlO_xOH_y with x + y ∼ 2) hydroxylation product. STM and LEED show the amorphisation and roughening of the oxide film. At P(H₂O) = 1 × 10⁻⁷ mbar, only the surface of the oxide film is modified, with formation of nodules of ∼2 nm lateral size covering homogeneously the surface. STS shows that essentially the valence band is modified with an increase of the density of states at the band edge. With increasing pressure, hydroxylation is amplified, leading to an increased coverage of the alloy by oxy-hydroxide products and to the formation of larger nodules (∼7 nm) of amorphous oxy-hydroxide. Roughening and loss of the nanostructure indicate a propagation of the reaction that modifies the bulk structure of the oxide film. Amorphisation can be reverted to crystallization by annealing under UHV at 1025 K when the surface of the oxide film has been modified, but not when the bulk structure has been modified.     

A matricial corona theorem II

We extend the ``matricial corona theorem' of M. Andersson to general algebras of functions which satisfy a corona theorem.

     

微波消解ICP-AES法同时测定花岗石中铜、镉、铬和砷

本文采用微波消解和ICP－AES法，同时测定花岗石样品的铅、镉、铬、砷4有害元素，检出限分别为0．0008、0．0007、0．0018、0．0012μg.mL^-1,回收率为93．4％－102．5％，RSD为1．3％－3．6％，该法准确、快速、简便，结果令人满意。     

燃煤烟气中As、Se、Pb的形态分布及S、Cl元素对其形态分布的影响

基于化学热力学平衡分析方法，计算分析了燃煤烟气中重金属As、Se、Pb的形态分布规律，研究了S、Cl等元素对As、Se、Pb的形态分布规律的影响。结果表明，氧化性气氛下，As以As₂O₅、As₄O₆、AsO等氧化物的形式存在；Se主要以SeO₂形式存在；Pb在1000 K以下主要是固态PbSO₄，1200 K以上为气态PbO。还原性气氛下，As在较低温度时为固态As₂S₂，900-1400 K以As₂、AsS、AsN气体共存，2000 K以上全部转化为气态AsO。Se在1100 K以下主要以气态H₂Se存在，1100 K开始生成SeS和Se₂气体，1800 K时主要是气态Se和少量气态SeO；Pb在中低温时主要是PbS，1800 K以上气态Pb为主要存在形态。S在还原性气氛下增大了AsS（g）、PbS（g）、SeS（g）的比例，氧化性气氛下对As、Se、Pb形态分布基本无影响；Cl无论在氧化还是还原气氛下对As、Se影响均较小，但对Pb的形态分布影响较大。     

完全Rees矩阵半群的分解及性质

用等价关系Q^~出了完全Rees矩阵半群的一种分解．而且得到了它的每个Q^~一类的表示．     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

火焰原子吸收光谱法测定磁化杯中铅、镉和铁

本文研究了火焰原子吸收光谱法测定磁化杯陶瓷内胆中Ｐｈ、Ｃｄ和Ｆｅ含量的方法。样品经粉碎，用硝酸－高氯酸混合液进行消解后测定。本法灵敏度高，干扰少，简单，快速，具有良好的精密度和准确度，其相对标准偏差分别为Ｐｂ３．９９％，Ｃｄ１０．７％，Ｆｅ０．９％。回收率Ｐｂ１００．６１％，Ｃｄ１０１．１８％，Ｆｅ１０２．４％。     

教学质量的时齐马尔可夫链评估法

本文研究了教学质量评估中的一种定量分析方法──时齐马尔可夫链评估法．阐明了这种方法的理论依据及其实施程序、并指出它较之其他教学质量评估法更显合理．     

平台石墨炉原子吸收测磷的方法研究

研究了平台石墨炉原子吸收测定磷的方法,表明以氯化钯和硝酸钙的混合液作为基体改进剂测定生物样品中的磷效果最好,方法特征量为8×10~(-9)g,工作曲线线性范围为0～0.400吸光度,精密度好,抗干扰能力强,方法简单,利用标准曲线即可测定生物样品中磷。     

Semidefinite optimization models for limit and shakedown analysis problems involving matrix spreads

Limit and shakedown analysis problems of Computational Mechanics lead to convex optimization problems, characterized by linear objective functions, linear equality constraints and constraints expressing the restrictions imposed by the material strength. It is shown that two important strength criteria, the Mohr–Coulomb and the Tresca criterion, can be represented as systems of semidefinite constraints, leading this way to semidefinite programming problems.