Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.     

合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。     

Coordination Sorption of Urea by Novel Urea Sorbent——Polymer-bound Metal Complexes

Urea can be sorbed by coordination (or complexation)with transitional metalpolyacrylic acid complex and transitional metal-polyacrylamide containing polyethylenepolyamine ligand complexes. The experimental results indicate that the sorbents can sorb about 60mg urea per gram of sorbent at 37℃ and the concentration of urea was 1300.0rag/1 in NaH_2PO_4 and Na_2HPO_4 buffer solution (pH=7.0) and the urea sorption capacity was affected by many factors such as other competive ligands, sorption time, pH and the concentration of urea.     

石英晶体微天平技术研究纳米TiO_2表面Cu(Ⅱ)吸附与光化学还原过程

环境中排放的重金属离子Cu!对水生和陆生生物有强的毒害性。饮用水中Cu!的浓度高于1.0mg·L-1时,将会导致人畜得血色沉着病和胃肠粘膜病[1]。Cu!无法进行生物降解,除去废水中Cu!的常见方法有离子交换、置换、化学沉淀等[2],然而这些方法需要消耗大量的化学试剂,成本高。近来,研     

苯丙氨酸改性树枝状聚赖氨酸的合成及表征

以双芴甲氧羰基赖氨酸(Di- Fmoc -Lysine)为支化单元采用固相多肽合成技术制备了一种树枝状聚赖氨酸.该聚合物表面活性氨基通过与芴甲氧羰基苯丙氨酸(Fmoc- Phe)反应获得表面完全替代的苯丙氨酸改性树枝状聚赖氨酸.产物的分子量和结构经MS和NMR进行了表征.研究结果表明,利用该方法得到的产物分子量单一,是一种潜在的理想非病毒治疗载体.     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

四（对羟基苯基）卟啉—硅胶固定相的合成及在核苷酸分析中的应用

以大孔微硅胶作基体，经γ－氨丙基三乙氧基硅烷活化与间隔臂氯代环内烷反应后，再与预先合成的四（对羟基苯基）卟啉配体键合，构成电荷转移型亲和色谱固定相。以ＰＨ＝７．０的磷酸盐缓冲溶液作流动相，成功实现对一些核苷酸的高效液相亲和色谱分离。     

顺式-二(乙二胺)二硝基合钴(Ⅲ)苹果酸盐的晶体结构及手性识别

合成了标题化合物，并用X-射线衍射法确定了该分子的晶体结构。化合物Δ（λλ），Λ（δδ）－cis－[Co（en）2（NO2）2]2d，l-C4H4O5，Co2C12N12O13H22，Mr=657．94．晶体属单斜晶系，空间群为P21/c，晶胞参数：a=13．969（4），b=6.440（1），c＝14．408（4）A，β=94.37（1）°，V=1292．3A3，Z=2，Dc=1．69g／cm3，μ=105.833cm－1，F（000）=668.最终偏离因子R=0.066，Rw=0．085。结构分析表明晶体存在无序现象，其阴离子C4H4O52-有两种排列方式。R-构型和S-构型的几率各为50％，手性识别是通过Δ构型的阳离子与阴离子R-构型C原子上羟基氧形成氢键相互作用；Λ构型的阳离子与阴离子S-构型C原子上羟基氧形成氢键相互作用而实现的。     

Recyclable,non-leaching antimicrobial magnetic nanoparticles

Recyclable antimicrobial magnetic nanoparticles, Fe₃O₄@P(St-co-AcQAC), were prepared through surfactantfree seeded emulsion polymerization involving a polymerizable, hydrophobic quaternary ammonium compound (QAC). These antimicrobial magnetic nanoparticles demonstrated excellent antimicrobial activities against both Grampositive and Gram-negative bacteria, and can be reused for multiple times.     

Accuracy and long-term reproducibility of lead isotopic measurements by multiple-collector inductively coupled plasma mass spectrometry using an external method for correction of mass discrimination

The precision of isotopic measurements of Pb by thermal ionization mass spectrometry (TIMS) is limited by the fact that this element does not possess an invariant isotope ratio that can be used for the correction of mass fractionation by internal normalization. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) can overcome this limitation, because with plasma ionization, elements with overlapping mass ranges are thought to display identical mass discrimination. With respect to Pb, this can be exploited by the addition of Tl to the sample solutions; the mass discrimination factor obtained for Tl can then be used for the correction of the measured Pb isotope ratios. In this article we present the results of a detailed study that investigates the accuracy and precision of such an external correction technique for mass discrimination based upon the results of multiple analyses of a mixed standard solution of NIST SRM-981 Pb and SRM-997 Tl. Our data indicate that normalization of the Pb isotope ratios to the certified isotopic composition of SRM-997 Tl produces Pb isotopic results that are significantly lower than recently published reference values by TIMS. This systematic offset can be eliminated by renormalization of the Pb data to a different Tl isotopic composition to obtain an empirically determined mass discrimination factor for Pb that generates accurate results. It is furthermore shown that a linear law is least suited for the correction of mass discrimination, whereas a power or exponential law function provide significantly more accurate and precise results. In detail, it appears that a power law may provide the most appropriate correction procedure, because the corrected Pb isotope ratios display less residual correlations with mass discrimination compared to the exponentially corrected data. Using an exponential or power law correction our results, obtained over a period of over seven months, display a precision (2σ) of better than 60 parts per million (ppm) for ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb and of better than 350 ppm for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb. This represents a significant improvement compared to conventional TIMS techniques and demonstrates the potential of MC-ICPMS for routine, high-precision measurements of Pb isotopic compositions.