The tribological performance of fullerene‐like hydrogenated carbon films under ionic liquid lubrication

Fullerene‐like hydrogenated carbon films were deposited on Si substrate by plasma‐enhanced chemical vapor deposition. The microstructures of films were characterized by high‐resolution transmission electron microscopy and Raman spectrum. The tribological performance of films was tested by reciprocating ball‐on‐disc tester under 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ionic liquid. The surface morphology and chemical composition of wear tracks and wear rates were investigated by optical microscope, X‐ray photoelectron spectroscopy, and 3D surface profiler. The results indicated that the film with a typical fullerene‐like structure embedded into the amorphous sp² and sp³ carbon networks could be prepared successfully, and the film shows a higher hardness (26.7 GPa) and elastic recovery (89.9%) compared with the amorphous carbon film. Furthermore, the film shows a lower friction coefficient at low contact load and friction frequency, and excellent wear‐resistance performance at high load and frequency under ionic liquid lubrication. Meanwhile, the wear life of fullerene‐like hydrogenated carbon films could be improved significantly using ionic liquid as a lubrication material. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of thermal annealing on the structural and optical properties of maghemite (γ‐Fe2O3) nanoparticle thin films

In this study, maghemite (γ‐Fe₂O₃) nanoparticles were initially synthesized via chemical co‐precipitation and then deposited by spray pyrolysis as thin films on white glass substrates. The thin films were annealed for 8 h at 400, 450, 500, 550, and 600 °C in an oven. The structural studies of maghemite nanoparticles were carried out using X‐ray diffractometer. Structural properties that we investigated by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, SEM, and Energy dispersive X‐ray analysis (EDS). Optical properties of the samples were also investigated by ultraviolet‐visible (UV–vis) spectroscopy. The results showed that maghemite nanoparticles have crystalline structure with domain that increases in size with increasing annealing temperature. The optical band gap values were found to reduce from 2.9 to 2.4 eV with increase in annealing temperature. Copyright © 2015 John Wiley & Sons, Ltd.     

Strong Fluorescent Smart Organogel as a Dual Sensing Material for Volatile Acid and Organic Amine Vapors

An L ‐phenylalanine derivative ( C12PhBPCP ) consisting of a strong emission fluorophore with benzoxazole and cyano groups is designed and synthesized to realize dual responses to volatile acid and organic amine vapors. The photophysical properties and self‐assembly of the said derivative in the gel phase are also studied. C12PhBPCP can gelate organic solvents and self‐assemble into 1 D nanofibers in the gels. UV/Vis absorption spectral results show H‐aggregate formation during gelation, which indicates strong exciton coupling between fluorophores. Both wet gel and xerogel emit strong green fluorescence because the cyano group suppresses fluorescence quenching in the self‐assemblies. Moreover, the xerogel film with strong green fluorescence can be used as a dual chemosensor for quantitative detection of volatile acid and organic amine vapors with fast response times and low detection limits owing to its large surface area and amplified fluorescence quenching. The detection limits are 796 ppt and 25 ppb for gaseous aniline and trifluoroacetic acid (TFA), respectively.     

Au/ZnO/TiO_2复合薄膜的制备及光电转换性质

以含有Au和ZnO纳米颗粒的氢氧化钛溶胶作为成膜液,通过浸渍-提拉及灼烧处理在导电玻璃表面制备Au/ZnO/TiO2复合薄膜.利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)等方法对所得产物进行表征.结果表明,Au和ZnO纳米颗粒均匀地分布在多孔TiO2薄膜上,通过TiO2、ZnO和Au三组分的协同效应促进了光吸收和电荷分离,使Au/ZnO/TiO2复合薄膜具有较好的光电转换性质,可用作太阳能电池材料.     

Capacitive Properties of the Binder‐Free Electrode Prepared from Carbon Derived from Cotton and Reduced Graphene Oxide

The binder‐free composite films of reduced graphene oxide (rGO ) and activated carbon derived from cotton (aCFC ) have been fabricated and used as electrodes for electrochemical capacitors (ECs ) to avoid the decrease of capacitive performance in traditional process caused by the additional binder. The optimal aCFC is prepared at 850 °C when the mass ratio of carbon and potassium hydroxide is 1 to 4. The optimal composite film prepared from the mass ratio of aCFC /GO =2/1 exhibits porous structure, and has a specific surface area of 849.6 m²•g⁻¹ and a total pore volume of 0.61 mL •g⁻¹. Based on the two‐electrode system testing in 6.0 mol/L KOH electrolyte, the optimal composite has specific capacitance of about 202 F•g⁻¹, 374 mF •cm⁻² and 116 F•cm⁻³ in terms of mass, area and volume, and shows excellent rate capability and good cyclic stability (91.7% retention of the initial capacitance after 5000 cycles). Furthermore, the assembled solid‐state ECs by using KOH /polyvinyl alcohol as electrolyte show good mechanical stability and capacitive performances after repeated bending cycles. It is proved that this method is effective to fabricate binder‐free electrodes for ECs and will open up a novel route for the reuse of waste cotton.     

光纤SPR传感器的结构、膜材与应用进展

光纤表面等离子共振(Fiber optic surface plasmon resonance,FO-SPR)传感器由于体积小、易携带、抗电磁干扰等优点在生物、化学、医学及食品领域均具有广阔的应用前景。该文综述了光纤SPR传感器的结构、膜材料及其应用进展。其中终端反射式和在线传输式是光纤SPR传感器最重要的两种结构;最常用的膜材料包括金膜、银膜、复合膜和金属纳米颗粒。基于光纤SPR的实时检测、抗干扰能力强、可多通道检测等特点展望了其未来发展与应用前景。     

二氧化硅纳米均孔膜修饰电极检测化妆水中的抗氧化剂

制备了氧化铟锡(ITO)电极支撑的二氧化硅纳米均孔膜,保留胶束模板在纳米通道内,得到二氧化硅和胶束复合膜修饰的电极,并将其用于化妆品中丁基羟基苯甲醚和叔丁基对苯二酚的电化学检测。该均孔膜孔径2.3 nm,具有精确的尺寸筛分能力;胶束尾部的碳氢长链提供了疏水微环境,能够在水溶液中快速萃取和富集疏水有机分子。该电极对两种抗氧化剂的检测均获得了较好的灵敏度、线性范围和检测限,加标回收率分别为96.4%和104%,表明该电化学传感器具有一定的应用潜力。     

预嵌锂用穿孔集流体对锂离子电容器电化学性能的影响

将石墨涂覆于传统铜箔(CCC)与穿孔铜箔(PCC)集流体表面,通过内部短路的方式进行预嵌锂处理,再以商业化的活性炭及预锂化的石墨分别为正、负极材料组装成锂离子电容器(LIC)。以PCC为集流体的LIC在0.1和2.0 A?g~(-1)的电流密度下,能量密度分别为118.2和51.7 Wh?kg~(-1),并且在0.5 A?g~(-1)的电流密度下循环1000次后的能量密度保持率为90%;以CCC为集流体的LIC在0.1和2.0 A?g~(-1)的电流密度下的能量密度分别为125.5和43.3 Wh?kg~(-1),在同等电流密度下2.0-3.8 V之间循环1000次后的能量密度保持率仅为73.2%。进一步研究表明,石墨采用PCC在预嵌锂的过程中避免了金属锂沉积,生成了均一且稳定的固体电解质膜(SEI),有效防止充放电过程中SEI膨胀,活性物质与集流体间粘结力降低,活性物质脱落等现象发生。因此,LIC通过PCC完成预嵌锂后的自放电及内阻更小,具有更佳的倍率性能和循环性能。     

银负载量对网状TiO_2柔性薄膜电极储锂性能的影响

采用水热法结合银镜反应制备出一系列不同Ag负载量(2.2%、4.0%、6.4%,w/w)改性的3D纳米网状结构Ag@Ti O2薄膜电极。利用电感耦合等离子体技术(ICP)、X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDX)等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在Ti O2纳米线表面。电化学测试数据则表明,4.0%(w/w)负载量的Ag@Ti O2相比于未改性和其他负载量的Ti O2纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 m A·g~(-1)的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 m Ah·g~(-1),在200 m A·g~(-1)下循环80次后容量保持率仍能达到99.8%。