液相性质对制备硫化物纳米级粒子化膜的影响

研究氯化锌浓度，溶液酸碱度，离子强度等底液性质及反应温度对化学反应法在不溶膜上制备纳米级硫化锌粒子化膜的影响，得出了一些规律并加以初步的解释。     

电镜样品的激光镀膜技术

非导电的样品用扫描电镜进行观测时需要对样品进行镀膜处理以获得清晰的图像, 本文介绍应用脉冲激光沉积(PLD)技术对非导电样品的表面进行镀膜处理的方法和实验装置及实验结果.     

等离子体聚合四丁基锡薄膜的制备和结构

研究了Ａｒ和Ａｒ／Ｏ＿２混合气携带四丁基锡的等离子体聚合规律和膜的组成、结构，分别得到低碳氢含量的金属Ｓｎ和ＳｎＯ＿ｘ共混膜。     

N,N—双水杨醛乙二胺合钴—全氟磺酸膜修饰电极的电化学研究

实验发现中性分子Ｎ，Ｎ－双水杨醛乙二胺合钴（Ｃｏ（ｓａｌｅｎ）可以通过简单浸泡进入全氟磺酸（Ｎａｆｉｏｎ）膜，形成具有稳定电化学响应的Ｃｏ（ｓａｌｅｎ）－ｎａｆｉｏｎ修饰电极，Ｘ射线光电子能谱表明，Ｃｏ（Ｓａｌｅｎ）中心钴原子能与Ｎａｆｉｏｎ膜中磺酸根基团形成轴向配位，而使其由＋２价变为＋３价状态，电化学研究表明，Ｃｏ（ｓａｌｅｎ）在Ｎａｆｉｏｎ膜中的电荷转移是电活性物迁移和电子跳适共同控制的，同     

空心阴极放电沉积氮化碳薄膜的结构和成键性质

利用空心阴极放电等离子体源在Si(100)衬底上沉积了氮化碳薄膜.用XRD,SEM,XPS及拉曼和红外吸收光谱对薄膜的结构、成分和化学键等进行了研究.XRD分析表明,制备的氮化碳薄膜为非晶结构.XPS分析证实了薄膜中以C—C,sp2CN和sp3CN键为主,并得出薄膜中的氮碳比为0.71,而sp3—CN相的含量也达到了0.39.拉曼和红外吸收光谱的结果也与XPS分析的键态结果一致.     

Processing parameters and transport properties of vacuum evaporated CdSe thin films

Semiconducting thin films of cadmium selenide have been grown by conventional thermal evaporation technique on glass substrate. Films evaporated at substrate temperature equal 523 K are stoichiometric and homogeneous. Effect of various growth parameters like rate of deposition and substrate temperature on the electrical properties has been studied in details. Also, the annealed at 673 K under vacuum for 1 h films have been analyzed for resistivity and Hall effect.     

Surface Acoustic Wave Characterization of Equivalent Young's Moduli for Patterned Films北大核心CSCD

Based on the equivalent elasticity theory for layered materials, the micro-mechanics equivalent models for single and dual damascene structures were established. The equivalent elastic constant of the patterned structure was introduced, to establish the propagation model for the surface acoustic waves propagating in the layered structure of the patterned film/ substrate, and the theoretical dispersion curves of the surface acoustic waves were calculated with Green’s function and the matrix method. The finite element method was used to calculate 24 numerical examples of damascene structures with different volume ratios, and the results were compared with those of the strain energy method. The results show that, the average relative errors of the equivalent Young’s moduli of the 300 nm-thick dual damascene film and the 100 nm-thick single damascene film are 2.06% and 2.27%, respectively. The research verifies the correctness of the equivalent patterned structure model and the feasibility of the surface acoustic wave method to characterize the mechanical properties of patterned films, and provides a reference for the development of suitable chemico-mechanical polishing technologies for patterned films under low pressure. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

氧化铟锡薄膜的磁感应热声分析

基于优良导体在磁场下的涡流效应理论和固体的热声效应理论,建立了氧化铟锡(ITO)导电薄膜磁-热-声效应的理论模型,推导了导电薄膜热致发声的温度振荡和输出声压表达式。对有基底的ITO导电膜进行了磁场下的热声理论计算和实验测试,结果表明：薄膜的温度振荡值随频率呈上升趋势,与电-热-声模型相比趋势相反;薄膜声压的理论值与实验值在频域内的变化趋势基本吻合,验证了理论模型的正确性。进而,根据磁-热-声的理论模型,分析了线圈相关参数对薄膜声压级的影响,结果表明：薄膜声压级随着线圈匝数的增加而增大,随着薄膜与线圈中心距离的增加而减小,随着线圈半径的增加而减小。文中的研究结果拓展了导电薄膜在扬声器等领域的应用。     

呼吸声分类技术研究及检测系统设计*

患有呼吸问题的病人由于呼吸道腺体不受意识控制、异物或者其本身肺部病变等原因会出现呼吸异常。医护人员通过病人的呼吸状况可以找寻和分析病人出现这种呼吸状况的原因。而以往呼吸声的诊断方式是专业的医护人员通过使用听诊器对病人进行肺部听诊。但是听诊的结果取决于医护人员的经验与相关参数。在初级诊断治疗阶段,初级医生识别听诊声的效率以及准确率很低,一般从20%到80%不等。因此会存在10%到20%的高误诊率（漏诊、错诊和延误）。本文提出了一种利用PVDF薄膜传感器提取语声特征的检测系统,该检测系统根据病人发出声音的不同,提取呼吸声特征值判断病人的呼吸状况。通过PVDF传感器采集的微弱呼吸声再经过KNN算法分类之后其识别率可达90.6%,对于细分种较类多的湿罗声,其识别率在80.2%左右。综上表明相比于传统听诊方式通过PVDF传感器采集识别的结果具有更高的准确性和可靠性,其判断呼吸状况的结果可以为医护人员提供参考,更好的为患有呼吸疾病的病人提供监测。     

Method of measuring one-dimensional photonic crystal period-structure-film thickness based on Bloch surface wave enhanced Goos-Hänchen shift

This paper puts forward a novel method of measuring the thin period-structure-film thickness based on the Bloch surface wave (BSW) enhanced Goos-Hänchen (GH) shift in one-dimensional photonic crystal (1DPC). The BSW phenomenon appearing in 1DPC enhances the GH shift generated in the attenuated total internal reflection structure. The GH shift is closely related to the thickness of the film which is composed of layer-structure of 1DPC. The GH shifts under multiple different incident light conditions will be obtained by varying the wavelength and angle of the measured light, and the thickness distribution of the entire structure of 1DPC is calculated by the particle swarm optimization (PSO) algorithm. The relationship between the structure of a 1DPC film composed of TiO₂ and SiO₂ layers and the GH shift, is investigated. Under the specific photonic crystal structure and incident conditions, a giant GH shift, 5.1×10³ times the wavelength of incidence, can be obtained theoretically. Simulation and calculation results show that the thickness of termination layer and periodic structure bilayer of 1DPC film with 0.1-nm resolution can be obtained by measuring the GH shifts. The exact structure of a 1DPC film is innovatively measured by the BSW-enhanced GH shift.