浅海波导界面对点源振速方向的影响

采用“虚源法”分析计算了浅海波导环境中接收点处点源总振速方向与水平面夹角,侧重讨论确定性界面反射对总振速方向的影响。研究结果表明：总振速方向和接收点与声源的水平距离、两者深度,海底、海面特性以及声速剖面等有关。在等声速均匀浅海波导中,由于确定性界面反射的影响,当直达声掠射角为1°～50°时,合成总振速方向偏离直达声方向达1.5°～10.5°,声速剖面呈负梯度时,偏离程度更甚.     

Intelligent reversible watermarking technique in medical images using GA and PSO

The advances in recording, editing, and broadcasting multimedia contents in digital form motivate to protect these digital contents from illegal use, such as duplication, manipulation, and redistribution. However, watermarking algorithms are designed to satisfy requirements of applications, as different applications have different concerns. We intend to design a watermarking algorithm for applications which require high embedding capacity and imperceptibility, to maintain the integrity of the host signal as well as embedded information. Reversible watermarking is a promising technique which satisfies our requirements. In this paper, we concentrate on improving the watermark capacity and reducing the perceptual degradation of an image. We investigated the Luo's [1] additive interpolation-error expansion algorithm and enhanced it by incorporating with two intelligent techniques: genetic algorithm (GA), and particle swarm optimization (PSO). Genetic algorithm is applied to exploit the correlation of image pixel values to obtain better estimation of neighboring pixel values, which results in optimal balance between information storage capacity and imperceptibility. Particle swarm optimization (intelligent technique) is also applied for the same purpose. Experimental results show that PSO and GA nearly give the same results, but GA outperforms the PSO. Experimental results also reveal that the proposed strategy outperforms the state of art works in terms of perceptual quality and watermarking payload.     

二冷配水优化建模与混合自适应PSO算法求解

针对连铸二冷区生产环境复杂且存在着大量水雾干扰的情况,建立了连铸水量优化模型并提出了一种混合的自适应粒子群算法来求解连铸二冷水优化问题。依据冶金过程中的工艺要求建立了二冷水量优化模型,并在经典的PSO算法基础上提出了适合该问题求解了混合自适应PSO算法。由于连铸过程存在着偏微分方程约束,传统的优化方法容易陷入局部最优解,不能达到很好的动态优化效果。研究了粒子群算法,基于种群的多样性,不断的自适应的更新粒子群算法中参数,将禁忌搜索的方法和传统的粒子群算法结合,增强了算法的局部搜索能力和全局寻找全局最优的能力。将该算法应用到连铸二冷水动态优化中,实验结果表面该算法能够快速有效的求解该优化问题。该方法用于连铸二冷水优化是可行的、有效的。     

Investigating particle and volatile evolution during pulverized coal combustion using high-speed digital in-line holography

Devolatilization is an important process in pulverized coal combustion because it affects the ignition, volatile combustion, and subsequent char burning and ash formation. In this study, high-speed digital in-line holography is employed to visualize and quantify the particle and volatile evolution during pulverized coal combustion. China Shanxi bituminous coal particles sieved in the range of 105–154 µm are entrained into a flat flame burner through a central tube for the study. Time-resolved observations show the volatile ejection, accumulation, and detachment in the early stage of coal combustion. Three-dimensional imaging and automatic particle extraction algorithm allow for the size and velocity statistics of the particle and stringy volatile tail. The results demonstrate the smaller particle generation and coal particle swelling in the devolatilization. It is found that the coal particles and volatiles accelerate due to the thermal buoyancy and the volatiles move faster than the coal particles. On average, smaller particles move faster than the larger ones while some can move much slower possibly because of the fragmentation.     

改进的粒子群算法在虚拟企业合作伙伴选择中的应用

根据虚拟企业合作伙伴选择的原则,给出了合作伙伴选择的多目标决策模型,用定量的方法对合作伙伴进行描述.同时,给出了改进的二进制粒子群优化算法,并对本文的多目标优化问题进行求解.通过仿真试验测试,证明该方法是可行性.     

高速粒子场同轴Fraunhofer全息数据处理系统研究

介绍了用同轴Fraunhofer全息测量强动载下材料表面微喷射粒子场的数据处理方法.在全息像重建过程中，将再现的三维粒子场由计算机控制分成许多小薄层采集.在数据处理过程中根据图像中粒子边缘，决定在整幅图或局部采用边缘检测的方法提取大粒子，根据图像的灰度分布将图像分成很多小区域，在每个小区域采用不同的阈值分割图像.在处理结果的校正中根据粒子场的特点，去除过大、过小和重复统计粒子.采用该方法得到了粒子的空间分布图像及粒子大小的统计结果.     

基于超声波测量技术的颗粒尺寸分布模型的研究

提出了一种利用单颗粒背向散射信号来进行粒径分布估算的超声波测量技术,系统阐述了其 理论基础及基本工作原理。被测颗粒的散射信号幅度与它在探测区中的位置、颗粒尺寸和形状有关。 通过理论分析,建立了一个可用于描述散射信号幅度概率分布与颗粒系尺寸分布之间关系的数学模 型,对该模型的反演计算便可得到颗粒系的尺寸分布信息。为了避免求解过程中的病态系数矩阵问 题,将模型求解转化成了易于解决的最优化问题。仿真实例结果验证了该技术的可行性。     

Well-crystallized zinc oxide quantum dots with narrow size distribution

In this study, pulsed laser ablation, online annealing, and following size classification using a differential mobility analyzer (DMA) were employed to fabricate quantum dots (QDs) of zinc oxide (ZnO). The irregularly shaped ZnO particles were obtained at annealing temperature less than 873 K, which gradually transformed into spherical QDs with increasing the annealing temperature. Finally, ZnO QDs with narrow size distribution having spherical shapes were successfully obtained at temperatures above 1173 K under the DMA classification at a nominal size of 10 nm. TEM observation demonstrated that the ZnO QDs obtained by this process were well-crystallized single crystallites with a wurtzite structure. Further, ZnO QDs with average sizes in the range of 4.8–8.1 nm were successfully fabricated by reducing the specified sizes of DMA. These features of the fabricated ZnO QDs are favorable for investigation of intrinsic quantum size effect in ZnO.     

Identification and control of nonlinear systems by a dissimilation particle swarm optimization-based Elman neural network

In this paper, we first present a learning algorithm for dynamic recurrent Elman neural networks based on a dissimilation particle swarm optimization. The proposed algorithm computes concurrently both the evolution of network structure, weights, initial inputs of the context units, and self-feedback coefficient of the modified Elman network. Thereafter, we introduce and discuss a novel control method based on the proposed algorithm. More specifically, a dynamic identifier is constructed to perform speed identification and a controller is designed to perform speed control for Ultrasonic Motors (USM). Numerical experiments show that the novel identifier and controller based on the proposed algorithm can both achieve higher convergence precision and speed than other state-of-the-art algorithms. In particular, our experiments show that the identifier can approximate the USM's nonlinear input–output mapping accurately. The effectiveness of the controller is verified using different kinds of speeds of constant, step, and sinusoidal types. Besides, a preliminary examination on a randomly perturbation also shows the robust characteristics of the two proposed models.     

平行双射流场纳米颗粒的形成与凝聚的研究

对平行双射流中H2SO4蒸气扩散进行了大涡模拟,给出了硫酸/水系统成核生成纳米颗粒及颗粒的凝聚过程中颗粒的分布特性,分析了燃料中硫的浓度、环境相对湿度以及射流Reynolds数对于颗粒浓度和粒径分布的影响．结果表明,硫酸/水系统会成核生成大量的纳米颗粒,在双管射流的中间和射流场周围,颗粒具有较高的浓度;颗粒的凝聚过程使颗粒的数量减少、直径变大;随着硫的浓度的增加,流场中的颗粒浓度有明显增加,而成核后形成的颗粒直径减小;环境湿度和Reynolds数的增大,有利于成核过程,因而导致形成更多的颗粒．