Simultaneous quantitative measurement of a new platelet activating factor antagonist (BN 50730) and its two main metabolites in human plasma and urine by LC-MS

Summary A simple and sensitive assay has been developed for the quantitative measurement of a new platelet activating factor antagonist (BN50730), and its two main metabolites (BN50727 and BN50922), at the picomole level in human plasma and urine. The three compounds of interest and the internal standard (BN50765) were measured by combined LC-negative chemical ionization MS. A simple solid-liquid extraction procedure was used to isolate the parent drug and the two metabolites. The MS was tuned to monitor the intense ionm/z 333 generated in the ion source by a dissociative capture process. The assay was on 1 ml plasma or 0.1 ml urine and the quantitation limit was calculated as 1 ng·ml^–1. The very low relative standard deviations and mean percentages of error calculated for within-day or between-day repeatability assays demonstrate the ruggedness of the technique for routine determination in biological fluids. Some preliminary results on the pharmacokinetics of the parent drug and its two main metabolites illustrate the applicability of this method.     

分散共聚法制备特殊形态高分子微球的研究

以聚乙二醇 (PEG)大分子单体为反应性稳定剂 ,在丙烯腈的分散共聚反应中添加少量苯乙烯以形成疏水性核 ,制备得到了亚微米级高分子微球 .透射电子显微镜研究表明 ,该高分子微球具有特异的形态结构 .同时研究了分散共聚体系中各种反应因素对微球形态和直径的影响 ,结果表明 ,苯乙烯单体的添加量、PEG大分子单体的浓度及分子量、混合溶剂的组成对微球直径和形态均有明显的影响 .X 射线光电子能谱 (XPS)研究结果表明 ,微球表面聚集有亲水性PEG链 ,核为疏水的聚 (丙烯腈 苯乙烯 ) ,即形成的特异形态的PEG接枝高分子微球亦为复合型结构     

Effects of citrate on the composition and enzymic coagulation of colloidal bovine casein aggregates

Colloidal casein aggregates (CCA) prepared from soluble whole bovine caseinates in the presence of Ca²⁺ and phosphate (Pi) ions by addition of different citrate (Cit) concentrations showed different mineral and proteic composition. Citrate concentration conditions the Ca and Pi concentrations incorporated into CCA, probably due to the complexing effect of this anion on calcium. A significant change in the incorporated Ca/Pi ratio at 8 mM citrate could very likely be associated to changes in CCA net charge. The incorporation of individual caseins to the colloidal particles obtained, as well as their average size and size distribution, depended also on the Cit concentration used [Cit]_P. α_S- and β-caseins assembled in the CCA structure sharply decreased at a [Cit]_P higher than 15 mM, i.e., at a low Ca²⁺ concentration in the aggregates, showing that the presence of this cation is necessary for the incorporation of these caseins. An inverse relationship between the aggregation step rate in CCA enzymic coagulation and their average size was observed. The aggregation rate vs the average size curve obtained at [Cit]_P 8 mM clearly differed from the curves obtained at 10 and 12 mM, respectively, a fact probably related to a change in the CCA net charge. This behavior showed the effect of citrate concentration on CCA functional properties.     

Multicolor particle systems with large threshold and range

In this paper we consider the Greenberg-Hastings and cyclic color models. These models exhibit (at least) three different types of behavior. Depending on the number of colors and the size of two parameters called the threshold and range, the Greenberg-Hastings model either dies out, or has equilibria that consist of debris or fire fronts. The phase diagram for the cyclic color models is more complicated. The main result of this paper, Theorem 1, proves that the debris phase exists for both systems.     

Comparison of particle size and flow rate optimization for chromatography using one-monomer molecularly imprinted polymers versus traditional non-covalent molecularly imprinted polymers

The dependence of enantio-selective chromatographic performance on particle size, as measured by separation factor, was investigated for one-monomer molecularly imprinted polymers (OMNiMIPs) compared to traditionally formed EGDMA/MAA molecularly imprinted polymers (MIPs). Five particle size ranges were compared (<20 μm, 20-25 μm, 25-38 μm, 38-45 μm, and 45-63 μm), revealing that the particle sizes above 25 μm provided the highest separation factor, and thus the best enantiomer separation, for both imprinted polymers. Other chromatographic parameters such as the number of theoretical plates and resolution exhibited only minor changes for the OMNiMIPs as the particle size changed, except for particles 20 μm and below. However, the number of theoretical plates and resolution for EGDMA/MAA are higher for particles in the 20-25 μm range. Thus, chromatographic factors for the EGDMA/MAA polymers are better in this range, despite better enantioselectivity for particle sizes above 25 μm. In contrast, OMNiMIPs generally show the most favorable performance for particle sizes in the 38-45 μm range. It was also found that decreasing flow rate resulted in improved enantioselectivity for both MIPs for all particle sizes.     

Template functions of particle monolayers on hydrophobic solid substrates

The template function of cationic particle monolayers bearing quaternary ammonium groups on their surfaces towards anionic colloids was investigated in this paper. Monodispersed cationic polymer particles having quaternary ammonium groups were self-organized on octadecylated glass plates through hydrophobic interaction. The morphology of the resulting particle monolayers was changed by tuning hydrophilic–hydrophobic balance of particles to fabricate aggregated type and dispersed type of particle monolayers. Gold and silver colloids were selectively deposited onto the particle monolayers through electrostatic interaction. The deposited gold and silver colloids on particle monolayers showed plasmon absorbance. Fluorescent silica colloids were also selectively deposited on particle monolayers to permit fluorescence labeling of the particle monolayers. Cationic particle monolayers fabricated on hydrophobic solid octadecylated were found to effectively work as templates for the deposition of above mentioned inorganic colloids.     

Creeping motion of an assemblage of composite spheres relative to a fluid

The sedimentation of a homogeneous distribution of spherical composite particles and the fluid flow through a bed of these particles are investigated theoretically. Each composite particle is composed of a spherical solid core and a surrounding porous shell. In the fluid-permeable porous shell, idealized hydrodynamic frictional segments are assumed to distribute uniformly. The effect of interactions among the particles is taken into explicit account by employing a fundamental cell-model representation which is known to provide good predictions for the motion of a swarm of nonporous spheres within a fluid. In the limit of a small Reynolds number, the Stokes and Brinkman equations are solved for the flow field in a unit cell, and the drag force exerted by the fluid on the particle is obtained in a closed form. For a distribution of composite spheres, the normalized mobility of the particles decreases or the particle interactions increase monotonically with a decrease in the permeability of their porous shells. The effect of particle interactions on the creeping motion of composite spheres relative to a fluid can be quite significant in some situations. In the limiting cases, the analytical solutions describing the drag force or mobility for a suspension of composite spheres reduce to those for suspensions of solid spheres and of porous spheres. The hydrodynamic behavior for composite spheres may be approximated by that for permeable spheres when the porous layer is sufficiently thick, depending on the permeability.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. II. Self-organization of cationic polymer particles on polymer films and wettability control with particle monolayers

Self-organization of cationic polymer particles through hydrophobic interaction on polymer films in aqueous system and characteristic properties of the resulting particle monolayers were investigated. Cationic polymer particles bearing quaternary ammonium groups on their surfaces effectively self-organized on polymer films. With an increase of the particle surface charge density, the surface coverage and average aggregate size (N _a) decreased. The surface coverage control was accomplished by tuning the ionic strength of the media. The wettability of polymer films for water was imparted by the formation of particle monolayers on them. Annealing of the particle monolayers resulted in the increase of the adhesive strength, while the wettability for water was lost. Further improvements of both wettability and adhesive strength of particle monolayers were achieved by the immobilization of silica colloids on the particle monolayers. This method would be effective for the hydrophilization of polymer films.     

基于支持向量机的凝血功能诊断模型

使用凝血四项指标诊断凝血功能是临床的常规检查,但根据经验进行诊断正确率不高.剔除临床上最重要的指标FIB后,建立支持向量机模型诊断的正确率和根据凝血四项指标诊断的正确率没有显著差异,100次模拟的平均正确率分别达到了95.4496%和95.5039%.     

Growth characteristics of spherical titanium oxide nanoparticles during the rapid gaseous detonation reaction

The nanosize grain growth characteristics of spherical single-crystal titanium oxide (TiO₂) during the rapid gaseous detonation reaction are discussed. Based on the experimental conditions and the Chapman–Jouguet theory, the Kruis model was introduced to simulate the growth characteristics of spherical TiO₂ nanoparticles obtained under high pressure, high temperature and by rapid reaction. The results show that the numerical analysis can satisfactorily predict the growth characteristics of spherical TiO₂ nanoparticles with diameters of 15–300 nm at different affecting factors, such as concentration of particles, reaction temperature and time, which are in agreement with the obtained experimental results. We found that the increase of the gas-phase reaction temperature, time, and particle concentration affects the growth tendency of spherical nanocrystal TiO₂, which provides effective theoretical support for the controllable synthesis of multi-scale nanoparticles.