On the self-similar solution to the Euler equations for an incompressible fluid in three dimensions

The equations for a self-similar solution to an inviscid incompressible fluid are mapped into an integral equation that hopefully can be solved by iteration. It is argued that the exponents of the similarity are ruled by Kelvin's theorem of conservation of circulation. The end result is an iteration with a nonlinear term entering a kernel given by a 3D integral for a swirling flow, likely within reach of present-day computational power. Because of the slow decay of the similarity solution at large distances, its kinetic energy diverges, and some mathematical results excluding non-trivial solutions of the Euler equations in the self-similar case do not apply.     

PSO-LSSVM对LIBS定量分析精度的提高

针对土壤定量分析受基体效应影响大，LIBS定量分析精度不佳等问题，采用粒子群算法对LSSVM进行优化，提高模型的精确度。选取Pb Ⅰ 405.78 nm和Cr Ⅰ 425.44 nm作为分析谱线进行分析。采集十二个不同浓度样品的特征光谱，每个浓度样品在不同点采集20组数据，将其中17组数据设为训练集，3组数据设为预测集，用LSSVM和PSO-LSSVM两种方法建立定标模型。对比两种模型的拟合相关系数（R2）、训练集均方根误差（RMSEC）和预测集均方根误差(RMSEP)。由于自吸收效应的影响，随着浓度的增加，预测值逐渐低于实际值，LSSVM定标模型的拟合程度较低，无法达到实验要求，模型性能有待提高。利用粒子群算法对LSSVM的模型参数惩罚系数和核函数参数进行优化，得到最佳的参数组合，Pb元素为(8 096.8, 138.865 7)，Cr元素为(4 908.6, 393.563 5)，用最佳的参数组合构建LSSVM的定标模型。相比于LSSVM，PSO-LSSVM定标模型的精确度更高，Pb和Cr元素的R2提高到了0.982 8和0.985 0，拟合效果明显提升。Pb和Cr元素的训练集均方根误差由0.026 0 Wt%和0.027 2 Wt%下降到0.022 4 Wt%和0.019 1 Wt%，预测集均方根误差由0.101 8 Wt%和0.078 8 Wt% 下降到0.045 8 Wt%和0.042 0 Wt%，模型的稳定性进一步提高。说明PSO-LSSVM算法能够更好地降低土壤基体效应和自吸收效应带来的影响，提高分析结果的精确度与稳定性。     

轮台白杏叶片铁锰浓度光谱估算模型

建立基于光谱分析的轮台白杏叶片铁(Fe)、锰(Mn)元素浓度估算模型,为快速建立轮台白杏树体微量营养元素诊断体系提供技术途经。采用Unispec-SC光谱仪测定土壤肥力存在显著差异条件下轮台白杏果实不同生育时期叶片的光谱反射率,通过分析叶片中Fe和Mn元素浓度与Rλ和f′(Rλ)的相关性,筛选出光谱指示波段,并采用线性回归模型建立光谱估算模型以估算叶片Fe和Mn营养元素浓度。结果表明:轮台白杏果实不同生育时期叶片Fe元素的光谱敏感波段各不相同,果实坐果期和硬核期敏感波段分别为873和874nm,375和437nm。果实成熟期敏感波段为836和837nm而果实收后期敏感波段为325和1 054nm;轮台白杏果实四个生育时期Mn元素的光谱敏感波段分别为913和1 129nm,425和970nm,390和466nm,423和424nm;轮台白杏叶片Fe和Mn元素浓度均与光谱反射率一阶微分f′(Rλ)相关性最强,与之建立的线性光谱估算模型拟合度最高,且达到了显著或极显著水平。表明果实不同生育时期,轮台白杏叶片Fe和Mn元素的光谱指示波段不同,可根据双波段f′(Rλ)采用线性模型估算白杏叶片Fe和Mn元素浓度。     

A Robust Near-Infrared Calibration Model for the Determination of Chlorophyll Concentration in Tree Leaves with a Calibration Transfer Method

A method based on piecewise direct standardization was developed to directly predict leaf chlorophyll concentrations by correction of near-infrared spectra to construct a robust calibration model. Chinar, camphor, and gingko leaves collected from two growth intervals were evaluated. Spectral pretreatment methods and wavelength selection were investigated. The first derivative combined with stability competitive adaptive reweighted sampling before piecewise direct standardization provided the best performance. Under the optimized parameters, the root mean square error of prediction was significantly reduced by using piecewise direct standardization. This study demonstrates that the calibration model may be used to rapidly characterize chlorophyll concentrations across species and growth intervals.     

Comparison of two-dimensional integration methods for shape reconstruction from gradient data

As a requisite and key step in some gradient-based measurement techniques, the reconstruction of the shape, more generally the scalar potential, from the measured gradient data has been studied for many years. In this work, three types of two-dimensional integration methods are compared under various conditions. The merits and drawbacks of each integration method are consequently revealed to provide suggestions in selection of a proper integration method for a particular application.     

QSAR Study on Binding Affinity of PATs (Rodenticides) to the [3H]-Mepyramine-Labelled H1 Receptor In Rat and Guinea Pig Brain

Abstract

The binding of a series of PAT analogues (rodenticides) to the [³H]-mepyramine-labelled H₁ receptor in rat and guinea pig brain was investigated topologically using negentropy (N), molecular redundancy (MRI), first-order molecular connectivity (¹X _v ), Wiener (W), and Szeged (Sz) indices. Multiple regression analyses showed that MRI provided excellent results upon introduction of indicator parameters. Predictive ability of the proposed models was discussed using cross-validation parameters.     

Simultaneous Anodic Stripping Voltammetric Determination of Pb and Cd,Using a Vibrating Gold Microwire Electrode,Assisted by Chemometric Techniques

Simultaneous anodic stripping voltammetric determination of Pb and Cd is restricted on gold electrodes as a result of the overlapping of these two peaks. This work describes the quantitative determination of a binary mixture system of Pb and Cd, at low concentration levels (up to 15.0 and 10.0 µg L^?1 for Pb and Cd, respectively) by differential pulse anodic stripping voltammetry (DPASV; deposition time of 30 s), using a green electrode (vibrating gold microwire electrode) without purging in a chloride medium (0.5 M NaCl) under moderate acidic conditions (HCl 1.0 mM), assisted by chemometric tools. The application of multivariate curve resolution alternating least squares (MCR‐ALS) for the resolution and quantification of both metals is shown. The optimized MCR‐ALS models showed good prediction ability with concentration prediction errors of 12.4 and 11.4 % for Pb and Cd, respectively. The quantitative results obtained by MCR‐ALS were compared to those obtained with partial least squares (PLS) and classical least squares (CLS) regression methods. For both metals, PLS and MCR‐ALS results are comparable and superior to CLS. For Cd, as a result of the peak shift problem, the application of CLS was unsuitable. MCR‐ALS provides additional advantage compared to PLS since it estimates the pure response of the analytes signal. Finally, the built up multivariate calibration models, based either in MCR‐ALS or PLS regression, allowed to quantify concentrations of Pb and Cd in surface river water samples, with satisfactory results.