辐射加热金X光再发射时间测量

利用星光Ⅱ三倍频激光打双盘靶，研究了辐射加热材料的Ｘ光发射时间。激光脉冲能量４０～６０Ｊ、脉冲宽度６００～７００ｐｓ。通过两台时间关联的亚千Ｘ光能谱仪分别监测双盘靶初、次级发射Ｘ光谱，给出了辐射加热次级Ｘ光再发射时间。     

超相对论强度激光与薄膜靶作用中0.4 nm以下X射线阿秒脉冲的产生

用一维粒子模拟程序对功率密度在10²² W/cm²以上的超强激光驱动薄膜靶产生的相对论电子层及其经过汤姆孙散射产生的阿秒X射线进行了研究. 结果表明, 在超相对论强度范围下增大驱动激光强度, 相应减小等离子体密度及厚度可使电子层获得更高纵向动量, 使汤姆孙散射光明显向更短波长移动. 优化相关参数得到了波长为 1.168 nm的阿秒脉冲. 经过对倍频探测光方案与驱动光以及薄膜靶参数进行综合考虑和优化, 得到的X射线相干辐射波长有效减小到0.4 nm以下, 产生的光子能量达到2 keV以上. 关键词： 超相对论强度激光 阿秒X射线 相对论电子层 汤姆孙后向散射     

Proper-Time Classical Electrodynamics

We construct a generalization of Maxwell's equations associated with the proper-time of the source which accounts for radiation reaction without any assumptions concerning the nature of the source. The theory leads to a new invariance group, related to the Lorentz group, which leaves the proper-time of the source fixed for all observers.     

相对论速调管放大器中微波放大机制

解析地研究了电子束在相对论速调管放大器（ＲＫＡ）的调制腔和漂移管中的预群聚；第一次用粒子－波相互作用的场方法导出了在辐射腔中预群聚电子束产生辐射的自洽方程；并且计算了线性区的增益．     

腔靶X射线辐射对称特性实验观测

在“神光”装置上用两种特殊结构的实验靶型,通过两个不同方位的诊断孔观测腔内壁Ｘ光再辐射的空间能谱结构和Ｘ光辐射总量,分别研究了与激光第一打击面完全对称和不对称的腔内壁（两个被观测位置相差９０°）Ｘ光辐射能谱和辐射能量的对称性,并对测量结果进行了简要的分析讨论．     

斜入射泵浦等离子体状态研究

 研究了作用在靶介质上的斜入射泵浦激光,对产生的靶等离子体状态以及激光增益区的影响。研究结果表明,等离子体状态和激光增益区随入射角θ0 (20(变化而变化。当θ0≤20°时这种变化不大。当θ0约30°时等离子体状态和激光增益区有比较明显的变化。当θ0≥40°时, 状态有很大的变化,严重影响激光增益和放大。     

Effect of buffer gas on the generation of eye-safe 1.54 μm radiation using the stimulated Raman scattering technique in CH4

Experimental results on the generation of 1.54 μm eye-safe radiation in pure CH₄, CH₄:He and CH₄:Ar mixtures pumped by the fundamental of an Nd:YAG laser, using the stimulated Raman scattering (SRS) technique, are described. A decrease in the energy conversion efficiency and degradation in the beam quality of S₁ was observed in pure CH₄ at high pump energies. This problem was overcome in CH₄:He and CH₄:Ar mixtures. Compared with the first Stokes (1.54 μm) energy conversion efficiency in pure CH₄, at a pump energy of 126 mJ, an enhancement of 50% in energy conversion efficiency was observed in the CH₄:Ar mixture (60% argon concentration) and as much as 100% in the CH₄:He mixture (60% helium concentration). The use of these buffer gas mixtures improved the spatial beam quality of the Stokes radiation considerably and also resulted in raising the pump threshold for optical breakdown of the Raman gain medium.     

硅酸铋(BSO)晶体闪烁性能研究

报道对BSO晶体闪烁性能研究的若干结果. 包括晶体的激发光谱和荧光光谱、光产额、发光衰减时间和抗辐照能力等特性.     

原位微区X射线荧光分析在矿物学研究中的应用

从新疆采集了13件岩矿石样品,用于研究蚀变过程中矿物的元素含量变化特征。成都理工大学研制的IED-6000型原位微区X射线荧光分析仪被应用于获得蚀变过程中矿物的化学和物理数据。这种无损的微区X射线荧光分析仪主要是以低功耗X光管和电致冷Si-PIN半导体探测器为基础,采用毛细管X射线透镜实现微区测量的功能,并且能够集成到任何显微镜上进行测量,焦斑长轴直径约110 μm。通过微区X射线荧光测量,将黝铜矿更正为黄铁矿,提高了矿物鉴定的效率及准确性;在蚀变剖面研究中,矿化岩石样品的长石颗粒都富含Cu和Zn元素,可以作为找矿直接指示元素。Cr,Mn和Co等元素含量与矿化程度呈负相关。     

On the credibility of insurance claim frequency: Generalized count models and parametric estimators

We analyze the concept of credibility in claim frequency in two generalized count models–Mittag-Leffler and Weibull count models–which can handle both underdispersion and overdispersion in count data and nest the commonly used Poisson model as a special case. We find evidence, using data from a Danish insurance company, that the simple Poisson model can set the credibility weight to one even when there are only three years of individual experience data resulting from large heterogeneity among policyholders, and in doing so, it can thus break down the credibility model. The generalized count models, on the other hand, allow the weight to adjust according to the number of years of experience available. We propose parametric estimators for the structural parameters in the credibility formula using the mean and variance of the assumed distributions and a maximum likelihood estimation over a collective data. As an example, we show that the proposed parameters from Mittag-Leffler provide weights that are consistent with the idea of credibility. A simulation study is carried out investigating the stability of the maximum likelihood estimates from the Weibull count model. Finally, we extend the analyses to multidimensional lines and explain how our approach can be used in selecting profitable customers in cross-selling; customers can now be selected by estimating a function of their unknown risk profiles, which is the mean of the assumed distribution on their number of claims.