一种相位提取算法误差特性的分析

设计了一种新的相位提取算法，根据推导的评价函数，研究了其误差特性，与传统相位提取算法做了比较分析，其频域特性有了显著提高．分析结果证明该算法对失谐误差不敏感，高阶偶数谐波误差对结果值也不敏感，具有比较优势．仿真实验结果验证了理论预期．     

Investigation of multiwavelength clock recovery based on heterodyne beats of sideband-filtered signal

We investigate a new parallel all-optical clock recovery scheme based on heterodyne beats of an optical sideband-filtered signal. The oscillating clock signal is recovered when the filtered sideband is combined with a stable local oscillator. The filtering is performed with an optical resonator, which by nature provides possibility for multiwavelength operation. The local oscillator could be realized by a multiwavelength laser, whose emission wavelengths are injection seeded with carrier wavelengths of the input data. The output signal of such a configuration benefits from a reduced bit-pattern effect and a stable offset level. The sideband filtering is demonstrated for 23 simultaneous channels at 100 GHz DWDM grid, each hosting a data stream of 10 Gbit/s.     

Speckle interferometry for measurement of continuous deformations

Improvements of a method for measurement of continuous displacements and deformations with digital phase shifting speckle pattern interferometry are presented. The method is based on an algorithm that, with the knowledge of the initial phase, only needs one image at a time to evaluate continuos phase changes due to object deformations. In the improved method, the initial random phase of the speckle pattern is evaluated using a number of phase-shifted images before the deformation under study. This is used for increasing the accuracy of the initial phase estimation and reducing influences from image noise and other measurement disturbances. The phase-shifted speckle patterns are used as references for comparison with the speckle patterns of the deformed object, thereby increasing the reliability and accuracy of the phase estimations of the deformed patterns. The technique can be used for measuring deformations such as transients and other dynamic events, heat expansion as well as other phenomena where it is difficult to accomplish phase shifting during deformation.     

光纤法珀应变传感器串并联混合复用的离散腔长变换解调研究

光纤法珀传感器复用的输出信号复杂,解调相当困难.为实现其串并联混合结构复用,根据光纤法珀应变传感器的双光干涉原理,阐述了传感器串并联混合复用的输出信号特征,分析了信号中各项成分对离散腔长变换方法解调结果的影响,并进行了计算机仿真.最后搭建实验平台,进行了四个传感器串并联混合复用的实验研究,证明该方案可行,解调准确度1 μm.     

光学移相干涉仪抗振系统的鲁棒控制系统仿真分析

将被动抗振和主动抗振相结合的混合控制技术应用于解决光学移相干涉仪抗振系统的不确定性问题,其中主动抗振采用鲁棒控制策略.该方法克服了由模型和干扰所引起的不确定性,使得控制系统能够有效地抑制抗振模型的不确定性和外部振动的干扰.仿真结果表明,该方法使光学移相干涉仪在振动的干扰下具有较好的鲁棒稳定性和控制准确度.     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

Theory and experiment of spatially and temporally partially coherent speckle shearing interferometry

The theory and experiment of spatially and temporally partially coherent speckle shearing interferometry is reported in this rapid communication for the first time. The general requirements for the surface roughness and coherence area of a diffuse object surface in spatially and temporally partially coherent speckle shearing interferometry are discussed. An experimental verification is presented and the results of theory and experiment are in good agreement.     

Method of developing all-optical parallel to serial converter exploiting Kerr non-linearity of medium

Different all-optical logic operations, memory blocks etc. are developed using the inherent parallelism of optics. In any digital communication and computation system, the role of serial to parallel and parallel to serial data conversion are very much essential for making a data convenient for transition.Here in this paper, the authors propose a new scheme for developing an all-optical parallel to serial data conversion system by using optical J-K Flip-Flops and some logic gates based on optical non-linear switches. The uses of such switches are widely established in the area of optical parallel computation.This process can be extend for developing some all-optical digital devices like shift register, optical pulse counters etc. The proposed scheme deals with the best use of high parallelism of the optics, so the super-fast processing speed can be achieved.